search

amigatommy / BME680-UniversalSensor

GNU General Public License v3.0
3 stars 1 forks source link

Using more than one sensor instances #1

Closed juergs closed 5 years ago

juergs commented 5 years ago

Hello Thomas, i pretend to use more than one sensor in fhem. How is the sensor-id configurable (eeprom during serial setup) and is LaCrosse-Gateway capable of receiving these instances?

regards, juergen

juergs commented 5 years ago

Sorry, could answer by myself ;-)

(COM6) BME680 wireless sensor V3.0 (COM6) Compiled: Fri Dec 07 17:57:22 2018 (COM6) Protocol: UniversalSensor (COM6) BSEC version: 1.4.5.1ESP Core Version: 2_4_0_RC1 (COM6) ESP SDK Version: 2.0.0(656edbf) (COM6) (COM6) Do you want to delete settings in EEPROM (Y/N)? (COM6) Y (COM6) Settings deleted. (COM6) (COM6) Node-ID is: 255 (0xFF) (COM6) New value (1-254): (COM6) Error, try again ! (COM6) received: 0 (COM6) Y112 (COM6) Node-ID set to: 112 (0x70)

By configuration via serial connection after reset with 115200 Baud Bitrate 8N1.

(COM6) Save settings ... (COM6) Node-ID : 112 (0x70) (COM6) Altitude : 0.0m (COM6) Temperature offset: 0.0 degrees celsius (COM6) (COM6) RFM69 init ... done (COM6) BME680 init ... done (COM6) BH1750 init ... done (COM6) Ready, start measuring ... (COM6) (COM6) [63321.00] P: 994.3| T: 38.24| rH: 18.11| IAQ: 25.00 (0)| Gas: 1184.00| Light: 15.42lx (COM6) [66321.00] P: 994.2| T: 38.28| rH: 18.00| IAQ: 25.00 (0)| Gas: 1443.00| Light: 15.42lx (COM6) [69321.00] P: 994.3| T: 38.32| rH: 17.88| IAQ: 25.00 (0)| Gas: 2019.00| Light: 15.42lx (COM6) [72321.00] P: 994.3| T: 38.33| rH: 17.83| IAQ: 25.00 (0)| Gas: 2560.00| Light: 15.42lx (COM6) [75321.00] P: 994.3| T: 38.35| rH: 17.77| IAQ: 25.00 (0)| Gas: 3147.00| Light: 15.42lx (COM6) [78321.00] P: 994.3| T: 38.33| rH: 17.77| IAQ: 25.00 (0)| Gas: 3593.00| Light: 15.42lx (COM6) [81321.00] P: 994.3| T: 38.30| rH: 17.79| IAQ: 25.00 (0)| Gas: 4028.00| Light: 15.42lx (COM6) [84321.00] P: 994.2| T: 38.26| rH: 17.82| IAQ: 25.00 (0)| Gas: 4430.00| Light: 15.42lx (COM6) [87321.00] P: 994.2| T: 38.24| rH: 17.83| IAQ: 25.00 (0)| Gas: 4843.00| Light: 15.42lx (COM6) [90321.00] P: 994.3| T: 38.26| rH: 17.80| IAQ: 25.00 (0)| Gas: 5237.00| Light: 15.42lx (COM6) [93321.00] P: 994.3| T: 38.25| rH: 17.83| IAQ: 25.00 (0)| Gas: 5602.00| Light: 15.42lx (COM6) [96321.00] P: 994.2| T: 38.25| rH: 17.82| IAQ: 25.00 (0)| Gas: 5926.00| Light: 74.58lx (COM6) [99321.00] P: 994.2| T: 38.27| rH: 17.81| IAQ: 25.00 (0)| Gas: 6275.00| Light: 111.67lx (COM6) [102321.00] P: 994.3| T: 38.28| rH: 19.40| IAQ: 25.00 (0)| Gas: 6411.00| Light: 21.85lx (COM6) [105321.00] P: 994.3| T: 38.33| rH: 21.43| IAQ: 25.00 (0)| Gas: 6836.00| Light: 546.25lx (COM6) [108321.00] P: 994.3| T: 38.42| rH: 21.17| IAQ: 25.00 (0)| Gas: 7223.00| Light: 882.92lx

amigatommy commented 5 years ago

Sorry, you were faster ;o) Yes, you can make all settings via serial connection after reset.

regards, Thomas