search

amigavision / AmigaVision

The ultimate Amiga games & demo scene setup for MiSTer & Pocket FPGAs, emulators, and real hardware. Open source, community driven. This is an Amiga HDF image builder using WHDL or custom installs, based on the Arcade Game Selector launcher.
https://amiga.vision
MIT License
104 stars 3 forks source link

Stops Working After Power Removed #179

Closed EkDor closed 2 months ago

EkDor commented 2 months ago

My Mister AmigaVision install works fine when installed. If I remove power from the MiSTer and then plug it back after a few seconds it will no longer work. If I click on one of the Amiga(mgl) files it just flashes and returns to the FAT directory. If I run an Update_All on the Mister AmigaVision will work again. Rinse and repeat.

While it is working, a soft or cold reset does not break it. Something about the removal of the power supply.

Sorry if this has been reported. I did a quick search and didn't find anything on it.

-Amend - AmigaVision v2024.04.04

Thanks. - Brook

limi commented 2 months ago

This seems like a bug that is caused by something outside of AmigaVision — it could be SD card corruption, it could be something that update_all is or isn’t doing, a bit hard to know, so narrowing it down a bit should help. Do you have a second SD card that you could do a clean MiSTer install and setup on?

EkDor commented 2 months ago

I have just bought two new ones for the MiSTer as it happens. Will give it a shot…

(time passed here)

Ok Created a new MiSTer install on new SD card and copied my files and settings over. It does appear to be ok now. Interesting it only seemed to affect the AmigaVision and non of the other Roms. Thanks.

Regards; Brook Gerard

On 25 Apr 2024, at 2:58 PM, Alex Limi @.***> wrote:

This seems like a bug that is caused by something outside of AmigaVision — it could be SD card corruption, it could be something that update_all is or isn’t doing, a bit hard to know, so narrowing it down a bit should help. Do you have a second SD card that you could do a clean MiSTer install and setup on?

— Reply to this email directly, view it on GitHub https://github.com/amigavision/AmigaVision/issues/179#issuecomment-2076396300, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB6D2FJS5PE42DOTPN2UOPDY7CH7TAVCNFSM6AAAAABGWZA2PSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZWGM4TMMZQGA. You are receiving this because you authored the thread.

limi commented 2 months ago

Glad to hear you got it working!