NVME M.2 2280 SSD Not Detected

I put in a 2TB M.2 NVME card and it isn't detected and doesn't appear in /dev/. Are NVME drives supported?

Here's my dmsg: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 5.15.134 (ao@openwrt) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23497-6637af95aa) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP PREEMPT Mon Oct 9 21:45:35 2023 [ 0.000000] Machine model: FriendlyElec NanoPi R5S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 16 MiB at 0x00000000ee800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s36312 r8192 d29224 u73728 [ 0.000000] pcpu-alloc: s36312 r8192 d29224 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176 [ 0.000000] Kernel command line: console=ttyS2,1500000 console=tty1 earlycon=uart8250,mmio32,0xfe660000 swiotlb=1 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3819968K/3930112K available (9728K kernel code, 2430K rwdata, 2900K rodata, 1792K init, 774K bss, 93760K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @440000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @450000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000000460000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000470000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001541] Console: colour dummy device 80x25 [ 0.001995] printk: console [tty1] enabled [ 0.002448] printk: bootconsole [uart8250] disabled [ 0.002986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003020] pid_max: default: 32768 minimum: 301 [ 0.003585] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.003638] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.006604] rcu: Hierarchical SRCU implementation. [ 0.006959] Platform MSI: interrupt-controller@fd440000 domain created [ 0.007287] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 0.007903] smp: Bringing up secondary CPUs ... [ 0.008691] Detected VIPT I-cache on CPU1 [ 0.008741] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.008768] GICv3: CPU1: using allocated LPI pending table @0x0000000000480000 [ 0.008830] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.009686] Detected VIPT I-cache on CPU2 [ 0.009731] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.009756] GICv3: CPU2: using allocated LPI pending table @0x0000000000490000 [ 0.009805] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.010697] Detected VIPT I-cache on CPU3 [ 0.010740] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.010762] GICv3: CPU3: using allocated LPI pending table @0x00000000004a0000 [ 0.010806] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.010929] smp: Brought up 1 node, 4 CPUs [ 0.011079] SMP: Total of 4 processors activated. [ 0.011097] CPU features: detected: 32-bit EL0 Support [ 0.011112] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.011133] CPU features: detected: Common not Private translations [ 0.011148] CPU features: detected: CRC32 instructions [ 0.011163] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.011178] CPU features: detected: Privileged Access Never [ 0.011191] CPU features: detected: RAS Extension Support [ 0.011209] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.011577] CPU: All CPU(s) started at EL2 [ 0.026719] KASLR disabled due to lack of seed [ 0.026921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.026969] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027747] pinctrl core: initialized pinctrl subsystem [ 0.029461] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.031637] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.032213] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.033012] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.035043] thermal_sys: Registered thermal governor 'step_wise' [ 0.035055] thermal_sys: Registered thermal governor 'power_allocator' [ 0.035638] cpuidle: using governor menu [ 0.035801] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.035975] ASID allocator initialised with 65536 entries [ 0.036119] Serial: AMBA PL011 UART driver [ 0.062407] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.063055] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.063696] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.064281] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.064826] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.081412] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.081460] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.081480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.081501] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.083835] cryptd: max_cpu_qlen set to 1000 [ 0.087184] fbcon: Taking over console [ 0.088018] vcc3v3_sys: supplied by vdd_usbc [ 0.088593] vcc5v0_sys: supplied by vdd_usbc [ 0.089302] vcc3v3_pcie: supplied by vcc5v0_sys [ 0.089655] vcc5v0_usb: supplied by vdd_usbc [ 0.090212] vcc5v0_usb_host: supplied by vcc5v0_usb [ 0.090976] vcc5v0_usb_otg: supplied by vcc5v0_usb [ 0.091345] pcie30_avdd0v9: supplied by vcc3v3_sys [ 0.091744] pcie30_avdd1v8: supplied by vcc3v3_sys [ 0.092365] iommu: Default domain type: Translated [ 0.092390] iommu: DMA domain TLB invalidation policy: strict mode [ 0.093615] SCSI subsystem initialized [ 0.093872] usbcore: registered new interface driver usbfs [ 0.093940] usbcore: registered new interface driver hub [ 0.094036] usbcore: registered new device driver usb [ 0.094307] pps_core: LinuxPPS API ver. 1 registered [ 0.094328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.094366] PTP clock support registered [ 0.095112] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.095210] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.097247] clocksource: Switched to clocksource arch_sys_counter [ 0.097626] VFS: Disk quotas dquot_6.6.0 [ 0.097750] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.103238] NET: Registered PF_INET protocol family [ 0.103569] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.106538] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.106634] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.106669] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.106951] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.107456] TCP: Hash tables configured (established 32768 bind 32768) [ 0.107654] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.107769] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.108144] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.108228] PCI: CLS 0 bytes, default 64 [ 0.109432] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.116002] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.124651] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.124695] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.178461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.178679] io scheduler mq-deadline registered [ 0.189731] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 0.189811] rockchip-dw-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 0.189860] rockchip-dw-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000 [ 0.189897] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0040000000 [ 0.190042] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled [ 0.190068] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 0.397264] rockchip-dw-pcie 3c0000000.pcie: Link up [ 0.397415] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 0.397443] pci_bus 0000:00: root bus resource [bus 00-0f] [ 0.397469] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff]) [ 0.397496] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff] [ 0.397519] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff] (bus address [0x40000000-0x7fffffff]) [ 0.397583] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 [ 0.397633] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.397724] pci 0000:00:00.0: supports D1 D2 [ 0.397745] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.402707] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 0.402911] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 [ 0.403013] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 0.403036] pci 0000:01:00.0: reg 0x10: [io size 0x0100] [ 0.403140] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 0.403216] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 0.403745] pci 0000:01:00.0: supports D1 D2 [ 0.403768] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.417552] pci 0000:00:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff] [ 0.417595] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref] [ 0.417627] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.417657] pci 0000:01:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit] [ 0.417730] pci 0000:01:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit] [ 0.417800] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.417838] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.417860] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.417881] pci 0000:00:00.0: bridge window [mem 0xf4200000-0xf42fffff] [ 0.418028] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 [ 0.421134] pcieport 0000:00:00.0: PME: Signaling with IRQ 66 [ 0.421660] pcieport 0000:00:00.0: AER: enabled with IRQ 75 [ 0.629464] phy phy-fe8c0000.phy.7: lane number 0, val 1 [ 0.629499] phy phy-fe8c0000.phy.7: lane number 1, val 2 [ 0.629520] phy phy-fe8c0000.phy.7: bifurcation enabled [ 0.645430] phy phy-fe8c0000.phy.7: p3phy (fw-d54d0eb) initialized [ 0.645580] rockchip-dw-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges: [ 0.645644] rockchip-dw-pcie 3c0400000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000 [ 0.645691] rockchip-dw-pcie 3c0400000.pcie: MEM 0x00f2200000..0x00f3ffffff -> 0x00f2200000 [ 0.645729] rockchip-dw-pcie 3c0400000.pcie: MEM 0x0340000000..0x037fffffff -> 0x0040000000 [ 0.659085] rockchip-dw-pcie 3c0400000.pcie: iATU unroll: enabled [ 0.659111] rockchip-dw-pcie 3c0400000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 0.865254] rockchip-dw-pcie 3c0400000.pcie: Link up [ 0.865409] rockchip-dw-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10 [ 0.865438] pci_bus 0001:10: root bus resource [bus 10-1f] [ 0.865464] pci_bus 0001:10: root bus resource [io 0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff]) [ 0.865491] pci_bus 0001:10: root bus resource [mem 0xf2200000-0xf3ffffff] [ 0.865514] pci_bus 0001:10: root bus resource [mem 0x340000000-0x37fffffff] (bus address [0x40000000-0x7fffffff]) [ 0.865579] pci 0001:10:00.0: [1d87:3566] type 01 class 0x060400 [ 0.865626] pci 0001:10:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.865718] pci 0001:10:00.0: supports D1 D2 [ 0.865739] pci 0001:10:00.0: PME# supported from D0 D1 D3hot [ 0.870595] pci 0001:10:00.0: Primary bus is hard wired to 0 [ 0.870627] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 0.870944] pci 0001:11:00.0: [10ec:8125] type 00 class 0x020000 [ 0.871051] pci 0001:11:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.871158] pci 0001:11:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 0.871235] pci 0001:11:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 0.871763] pci 0001:11:00.0: supports D1 D2 [ 0.871784] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.885601] pci_bus 0001:11: busn_res: [bus 11-1f] end is updated to 11 [ 0.885665] pci 0001:10:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff] [ 0.885695] pci 0001:10:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref] [ 0.885724] pci 0001:10:00.0: BAR 7: assigned [io 0x100000-0x100fff] [ 0.885754] pci 0001:11:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit] [ 0.885825] pci 0001:11:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit] [ 0.885896] pci 0001:11:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 0.885935] pci 0001:10:00.0: PCI bridge to [bus 11] [ 0.885956] pci 0001:10:00.0: bridge window [io 0x100000-0x100fff] [ 0.885980] pci 0001:10:00.0: bridge window [mem 0xf2200000-0xf22fffff] [ 0.889166] pcieport 0001:10:00.0: PME: Signaling with IRQ 85 [ 0.889712] pcieport 0001:10:00.0: AER: enabled with IRQ 86 [ 0.891068] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges: [ 0.891134] rockchip-dw-pcie 3c0800000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 [ 0.891184] rockchip-dw-pcie 3c0800000.pcie: MEM 0x00f0200000..0x00f1ffffff -> 0x00f0200000 [ 0.891221] rockchip-dw-pcie 3c0800000.pcie: MEM 0x0380000000..0x03bfffffff -> 0x0040000000 [ 0.904172] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled [ 0.904199] rockchip-dw-pcie 3c0800000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 2.009421] rockchip-dw-pcie 3c0800000.pcie: Phy link never came up [ 2.009598] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20 [ 2.009627] pci_bus 0002:20: root bus resource [bus 20-2f] [ 2.009653] pci_bus 0002:20: root bus resource [io 0x200000-0x2fffff] (bus address [0xf0100000-0xf01fffff]) [ 2.009681] pci_bus 0002:20: root bus resource [mem 0xf0200000-0xf1ffffff] [ 2.009704] pci_bus 0002:20: root bus resource [mem 0x380000000-0x3bfffffff] (bus address [0x40000000-0x7fffffff]) [ 2.009794] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400 [ 2.009834] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] [ 2.009864] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] [ 2.009891] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 2.009991] pci 0002:20:00.0: supports D1 D2 [ 2.010011] pci 0002:20:00.0: PME# supported from D0 D1 D3hot [ 2.014696] pci 0002:20:00.0: Primary bus is hard wired to 0 [ 2.014728] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 2.019146] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21 [ 2.019206] pci 0002:20:00.0: BAR 0: assigned [mem 0x380000000-0x3bfffffff] [ 2.019238] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000] [ 2.019263] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000] [ 2.019287] pci 0002:20:00.0: BAR 6: assigned [mem 0xf0200000-0xf020ffff pref] [ 2.019317] pci 0002:20:00.0: PCI bridge to [bus 21] [ 2.022541] pcieport 0002:20:00.0: PME: Signaling with IRQ 96 [ 2.023007] pcieport 0002:20:00.0: AER: enabled with IRQ 97 [ 2.029010] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.029061] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.031575] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.031611] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.032555] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active. [ 2.032916] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 2.035122] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 2.039164] printk: console [ttyS2] disabled [ 2.039259] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 44, base_baud = 1500000) is a 16550A [ 2.190177] printk: console [ttyS2] enabled [ 2.193170] random: crng init done [ 2.194450] rockchip-vop2 fe040000.vop: Adding to iommu group 0 [ 2.199818] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff800008a08b00) [ 2.200630] dwhdmi-rockchip fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind] ERROR Unable to parse OF data [ 2.202556] panfrost fde60000.gpu: clock rate = 594000000 [ 2.203080] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 2.204339] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.209064] loop: module loaded [ 2.209421] mtip32xx Version 1.3.1 [ 2.209897] Loading iSCSI transport class v2.0-870. [ 2.216047] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found [ 2.217118] rk_gmac-dwmac fe2a0000.ethernet: supply phy not found, using dummy regulator [ 2.218180] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output). [ 2.218835] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c). [ 2.219352] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f). [ 2.219871] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no). [ 2.225493] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII [ 2.226251] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 2.226906] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5 [ 2.227375] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported [ 2.228049] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported [ 2.228718] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported [ 2.229376] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported [ 2.229957] rk_gmac-dwmac fe2a0000.ethernet: TSO supported [ 2.230453] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.231173] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=8) [ 2.231807] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled [ 2.232350] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width [ 2.329832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.330448] ehci-pci: EHCI PCI platform driver [ 2.330919] ehci-platform: EHCI generic platform driver [ 2.333706] ehci-platform fd800000.usb: EHCI Host Controller [ 2.334250] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 2.335087] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 2.349223] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.350355] hub 1-0:1.0: USB hub found [ 2.350746] hub 1-0:1.0: 1 port detected [ 2.353981] ehci-platform fd880000.usb: EHCI Host Controller [ 2.354520] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [ 2.355328] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000 [ 2.369226] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 2.370298] hub 2-0:1.0: USB hub found [ 2.370684] hub 2-0:1.0: 1 port detected [ 2.371804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.372394] ohci-platform: OHCI generic platform driver [ 2.373137] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.373803] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [ 2.374639] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 2.437735] hub 3-0:1.0: USB hub found [ 2.438121] hub 3-0:1.0: 1 port detected [ 2.439224] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 2.439849] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.440662] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000 [ 2.505716] hub 4-0:1.0: USB hub found [ 2.506109] hub 4-0:1.0: 1 port detected [ 2.507990] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.508513] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 2.509400] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 2.510309] xhci-hcd xhci-hcd.0.auto: irq 18, io mem 0xfcc00000 [ 2.511020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.511531] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 2.512232] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.513388] hub 5-0:1.0: USB hub found [ 2.513773] hub 5-0:1.0: 1 port detected [ 2.514543] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.515771] hub 6-0:1.0: USB hub found [ 2.516160] hub 6-0:1.0: 1 port detected [ 2.517026] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.517573] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 2.518417] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 2.519313] xhci-hcd xhci-hcd.1.auto: irq 19, io mem 0xfd000000 [ 2.520021] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.520538] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 [ 2.521262] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 2.522365] hub 7-0:1.0: USB hub found [ 2.522749] hub 7-0:1.0: 1 port detected [ 2.523520] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.524724] hub 8-0:1.0: USB hub found [ 2.525107] hub 8-0:1.0: 1 port detected [ 2.526014] usbcore: registered new interface driver usb-storage [ 2.526900] i2c_dev: i2c /dev entries driver [ 2.529318] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected! [ 2.531870] vdd_cpu: supplied by vcc5v0_sys [ 2.537073] rk808 0-0020: chip id: 0x8090 [ 2.612406] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.613006] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.615668] vdd_logic: supplied by vcc3v3_sys [ 2.621464] vdd_gpu: supplied by vcc3v3_sys [ 2.626253] vcc_ddr: supplied by vcc3v3_sys [ 2.631631] vdd_npu: supplied by vcc3v3_sys [ 2.633076] vcc_1v8: supplied by vcc3v3_sys [ 2.636446] vdda0v9_image: Bringing 600000uV into 950000-950000uV [ 2.640330] vdda0v9_image: supplied by vcc3v3_sys [ 2.641842] vdda_0v9: supplied by vcc3v3_sys [ 2.646675] vdda0v9_pmu: supplied by vcc3v3_sys [ 2.651070] vccio_acodec: Bringing 600000uV into 3300000-3300000uV [ 2.654975] vccio_acodec: supplied by vcc3v3_sys [ 2.657080] vccio_sd: supplied by vcc3v3_sys [ 2.659072] vcc3v3_pmu: supplied by vcc3v3_sys [ 2.663906] vcca_1v8: supplied by vcc3v3_sys [ 2.668742] vcca1v8_pmu: supplied by vcc3v3_sys [ 2.673145] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV [ 2.677069] vcca1v8_image: supplied by vcc3v3_sys [ 2.678126] vcc_3v3: supplied by vcc3v3_sys [ 2.680517] vcc3v3_sd: supplied by vcc3v3_sys [ 2.688485] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0 [ 2.700569] rk808-rtc rk808-rtc: registered as rtc0 [ 2.703692] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:09 UTC (1501923609) [ 2.707680] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active. [ 2.714131] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active. [ 2.715755] sdhci: Secure Digital Host Controller Interface driver [ 2.716322] sdhci: Copyright(c) Pierre Ossman [ 2.716719] Synopsys Designware Multimedia Card Interface Driver [ 2.717774] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.718821] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 2.719514] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 2.720134] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 2.720737] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 35,32 bit host data width,256 deep fifo [ 2.721917] ledtrig-cpu: registered to indicate activity on CPUs [ 2.722875] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 2.723555] hid: raw HID events driver (C) Jiri Kosina [ 2.724111] usbcore: registered new interface driver usbhid [ 2.724612] usbhid: USB HID core driver [ 2.726563] NET: Registered PF_INET6 protocol family [ 2.728072] Segment Routing with IPv6 [ 2.728449] In-situ OAM (IOAM) with IPv6 [ 2.728856] NET: Registered PF_PACKET protocol family [ 2.729389] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.730693] 8021q: 802.1Q VLAN Support v1.8 [ 2.733746] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.750499] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 2.756075] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff800008a08b00) [ 2.760552] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.761764] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.762651] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffff800008a0cc10) [ 2.763503] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.764334] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 2.765322] panfrost fde60000.gpu: clock rate = 594000000 [ 2.765816] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 2.769918] panfrost fde60000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device [ 2.770738] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 2.771423] panfrost fde60000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400 [ 2.772143] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7 [ 2.773220] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1 [ 2.774582] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1 [ 2.777231] usb 7-1: new full-speed USB device number 2 using xhci-hcd [ 2.778117] Waiting for root device PARTUUID=54... [ 2.847011] mmc1: new HS200 MMC card at address 0001 [ 2.847958] mmcblk1: mmc1:0001 A3A551 28.9 GiB [ 2.849633] mmcblk1: p1 p2 [ 2.850289] mmcblk1boot0: mmc1:0001 A3A551 4.00 MiB [ 2.851651] mmcblk1boot1: mmc1:0001 A3A551 4.00 MiB [ 2.852794] mmcblk1rpmb: mmc1:0001 A3A551 16.0 MiB, chardev (245:0) [ 2.860012] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. [ 2.861327] Freeing unused kernel memory: 1792K [ 2.873242] Run /sbin/init as init process [ 2.873617] with arguments: [ 2.873619] /sbin/init [ 2.873621] with environment: [ 2.873623] HOME=/ [ 2.873625] TERM=linux [ 2.939647] input: Compx 2.4G Receiver as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.0/0003:25A7:FA64.0001/input/input1 [ 2.997586] hid-generic 0003:25A7:FA64.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-xhci-hcd.1.auto-1/input0 [ 3.003299] input: Compx 2.4G Receiver Mouse as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input2 [ 3.004592] input: Compx 2.4G Receiver as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input3 [ 3.005843] input: Compx 2.4G Receiver Consumer Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input4 [ 3.007416] init: Console is alive [ 3.007889] init: - watchdog - [ 3.069364] input: Compx 2.4G Receiver System Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb7/7-1/7-1:1.1/0003:25A7:FA64.0002/input/input5 [ 3.070748] hid-generic 0003:25A7:FA64.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-xhci-hcd.1.auto-1/input1 [ 3.431046] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.528916] Key type encrypted registered [ 3.536136] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 3.542687] raid6: skip pq benchmark and using algorithm neonx8 [ 3.543287] raid6: using neon recovery algorithm [ 3.546586] xor: measuring software checksum speed [ 3.549841] 8regs : 3541 MB/sec [ 3.552513] 32regs : 4319 MB/sec [ 3.555503] arm64_neon : 3834 MB/sec [ 3.555893] xor: using function: 32regs (4319 MB/sec) [ 3.632745] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 3.638016] fsl-ehci: Freescale EHCI Host controller driver [ 3.642325] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.643819] init: - preinit - [ 3.773296] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 4.023185] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 6.067462] loop0: detected capacity change from 0 to 60424192 [ 6.093211] loop0: detected capacity change from 60424192 to 60243200 [ 6.171432] F2FS-fs (loop0): Mounted with checkpoint version = 633d4409 [ 6.173360] mount_root: loading kmods from internal overlay [ 6.196486] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 6.201404] usbcore: registered new interface driver uas [ 6.202162] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 6.262580] block: attempting to load /etc/config/fstab [ 6.265615] block: unable to load configuration (fstab: Entry not found) [ 6.266268] block: no usable configuration [ 6.267682] mount_root: switching to f2fs overlay [ 6.375111] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null). Quota mode: none. [ 6.390850] urandom-seed: Seeding with /etc/urandom.seed [ 6.546824] procd: - early - [ 6.547160] procd: - watchdog - [ 7.103011] procd: - watchdog - [ 7.109395] procd: - ubus - [ 7.165151] procd: - init - [ 7.661995] urngd: v1.0.2 started. [ 7.760966] kmodloader: loading kernel modules from /etc/modules.d/ [ 7.782688] NET: Registered PF_ALG protocol family [ 7.790663] Key type dns_resolver registered [ 7.797168] Key type cifs.idmap registered [ 7.799702] NET: Registered PF_KEY protocol family [ 7.801732] Initializing XFRM netlink socket [ 7.815939] tun: Universal TUN/TAP device driver, 1.6 [ 7.829152] IPv4 over IPsec tunneling driver [ 7.865844] cryptodev: driver 1.12 loaded. [ 7.868725] GACT probability on [ 7.870378] Mirror/redirect action on [ 7.878742] u32 classifier [ 7.879013] input device check on [ 7.879340] Actions configured [ 7.887997] Simple TC action Loaded [ 7.899852] Bridge firewalling registered [ 7.948196] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 [ 7.948816] r8125 2.5Gigabit Ethernet driver 9.011.00-NAPI-RSS loaded [ 7.949511] r8125 0000:01:00.0: enabling device (0000 -> 0003) [ 7.967018] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 7.967870] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr se:cr:et:ma:ca [ 7.969281] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 7.972323] r8125 Copyright (C) 2022 Realtek NIC software team nicfae@realtek.com [ 7.972323] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. [ 7.972323] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. [ 7.975254] r8125 2.5Gigabit Ethernet driver 9.011.00-NAPI-RSS loaded [ 7.975883] r8125 0001:11:00.0: enabling device (0000 -> 0003) [ 7.994045] r8125 0001:11:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 7.994897] r8125 0001:11:00.0 (unnamed net_device) (uninitialized): Random ether addr se:cr:et:ma:ca [ 7.996264] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 7.999300] r8125 Copyright (C) 2022 Realtek NIC software team nicfae@realtek.com [ 7.999300] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. [ 7.999300] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. [ 8.003564] usbcore: registered new interface driver r8152 [ 8.009005] usbcore: registered new interface driver snd-usb-caiaq [ 8.012988] usbcore: registered new interface driver ums-alauda [ 8.014037] usbcore: registered new interface driver ums-cypress [ 8.015069] usbcore: registered new interface driver ums-datafab [ 8.016072] usbcore: registered new interface driver ums-freecom [ 8.017094] usbcore: registered new interface driver ums-isd200 [ 8.018162] usbcore: registered new interface driver ums-jumpshot [ 8.019165] usbcore: registered new interface driver ums-karma [ 8.020231] usbcore: registered new interface driver ums-sddr09 [ 8.021303] usbcore: registered new interface driver ums-sddr55 [ 8.022369] usbcore: registered new interface driver ums-usbat [ 8.026208] IPsec XFRM device driver [ 8.046786] xt_time: kernel timezone is -0000 [ 8.049816] usbcore: registered new interface driver cdc_ether [ 8.052023] usbcore: registered new interface driver cdc_ncm [ 8.061707] PPP generic driver version 2.4.2 [ 8.063343] NET: Registered PF_PPPOX protocol family [ 8.067184] usbcore: registered new interface driver snd-usb-audio [ 8.069898] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 8.070607] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 8.073434] kmodloader: done loading kernel modules from /etc/modules.d/ [ 12.272096] eth1: 0xffff80000a7a0000, se:cr:et:ma:ca, IRQ 0 [ 12.320478] br-lan: port 1(eth1) entered blocking state [ 12.320969] br-lan: port 1(eth1) entered disabled state [ 12.321857] device eth1 entered promiscuous mode [ 12.356928] eth2: 0xffff80000a610000, a6:22:af:0f:f4:b4, IRQ 76 [ 12.405558] br-lan: port 2(eth2) entered blocking state [ 12.406057] br-lan: port 2(eth2) entered disabled state [ 12.406874] device eth2 entered promiscuous mode [ 12.415154] rk_gmac-dwmac fe2a0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 12.513240] rk_gmac-dwmac fe2a0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 12.521218] dwmac4: Master AXI performs any burst length [ 12.521754] rk_gmac-dwmac fe2a0000.ethernet eth0: No Safety Features support found [ 12.522470] rk_gmac-dwmac fe2a0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 12.523462] rk_gmac-dwmac fe2a0000.ethernet eth0: registered PTP clock [ 12.524969] rk_gmac-dwmac fe2a0000.ethernet eth0: configuring for phy/rgmii link mode [ 12.733277] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 12.754855] usb-storage 6-1:1.0: USB Mass Storage device detected [ 12.755868] usb-storage 6-1:1.0: Quirks match for vid 152d pid 0567: 5000000 [ 12.756623] scsi host0: usb-storage 6-1:1.0 [ 13.789729] scsi 0:0:0:0: Direct-Access 4BAY H/W RAID5 5031 PQ: 0 ANSI: 6 [ 13.791397] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 13.792255] sd 0:0:0:0: [sda] 46883930112 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 13.792955] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 13.793876] sd 0:0:0:0: [sda] Write Protect is off [ 13.794327] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08 [ 13.795224] sd 0:0:0:0: [sda] Disabling FUA [ 13.795623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.880984] sda: sda1 sda2 [ 13.883319] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.996989] r8125: eth2: link up [ 14.997809] br-lan: port 2(eth2) entered blocking state [ 14.998303] br-lan: port 2(eth2) entered forwarding state [ 15.001929] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 15.616502] rk_gmac-dwmac fe2a0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 15.617438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.555096] overlayfs: filesystem on '/opt/docker/check-overlayfs-support2756741608/upper' not supported as upperdir

anaelorlinski / OpenWrt-NanoPi-R5S-Builds

NVME M.2 2280 SSD Not Detected #10