search

anderssv / smartthings-verisure

Verisure alarm integration with Smartthings
14 stars 28 forks source link

[Request] Change Alarm State, Smartplugs and Window/Door Sensors #1

Open orecus opened 7 years ago

orecus commented 7 years ago

As requested in smartthings-forum it would be sweet to implement the following;

I've found the following while reading the openHAB integration to Verisure.

I'll try and see if I can start playing around with this in the coming weeks, though I don't own any Smartplugs, @anderssv do you have those?

anderssv commented 6 years ago

Reading Window/Door sensors has some limitations. Since we only update once each minute (sometimes it can take 3-5 minutes because of throttling), you really cant use opening and closing to automate something that should happen instantly. You might even miss an open door because it closes before the next update.

iamjorgensen commented 6 years ago

It would be great to have a read window door sensor - I understand it can't be used for instant automations, but in some cases it can be useful. In my case I have a door with a yaleman doorlock that I have had to adjust tight to keep drag out. Positive: no drag at all - Negative: you need to gently push the door for it to lock properly. Danger is then that you can go to bed with a door open. Verisure has notifications but it would be nice to be able to create a automation using WebCore that flashed my bedlight as a gentle alarm that something is not right (When house is in "Night" mode and door not closed properly - flash light/turn bedlight red) :D

Gatthebazz commented 4 years ago

Hi,

It would be great to have the 'Read Window/Door Sensors' feature. I have Verisure window sensors on all our windows. In some rooms, I also have IKEA Fyrtur blinds, which I have created an ST automation to open and close the blinds at a specific time each day. In the evening, I only want the blinds to close if the windows are closed. The 'Read Window/Door Sensors' feature would make this possible. Alternatively, I would need to buy additional Z-wave sensors for this. Any plans to implement it?