search

andreisperid / E-TKT

open source embossed label maker
https://andreisperid.github.io/E-TKT/
MIT License
398 stars 19 forks source link

J_top overlapping features #29

Closed sedorr closed 1 year ago

sedorr commented 1 year ago

On the J_top-Part there is a screw hole hitting a countersink. PXL_20230418_190135623 Screenshot 2023-04-18 210710

andreisperid commented 1 year ago

Yes, I have noticed that!

It is not ideal, but the display holder has a little chamfer to avoid interference:

image

I decided to keep it that way to avoid major redesign, while keeping the structural capability for the display holder. I could fill in the gap, but it would be so thin it wouldn't make a relevant difference.

sedorr commented 1 year ago

PXL_20230418_201522334~2

There's not much use beyond 2,5*(outer thread diameter) screw-in depth in plastics so you could get away with a 16mm screw. Those 4mm less depth should be enough to clear the countersink.

andreisperid commented 1 year ago

Fixed on 4d45f6b, updated STLs, STEPs, BOM and assembly instructions.

Thanks!