search

andrewhodel / grblweb

a web based CNC controller for GRBL
189 stars 71 forks source link

grbl v1.1 support #23

Open michelcve opened 7 years ago

michelcve commented 7 years ago

Any chance that grblWeb will support the new grbl v1.1 protocol soon?

andrewhodel commented 7 years ago

Probably not for a few months, I am busy with another project.

Thanks, Andrew

On Jan 13, 2017, at 7:47 AM, michelcve notifications@github.com wrote:

Any chance that grblWeb will support the new grbl v1.1 protocol soon?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

hrobeers commented 6 years ago

@michelcve Is it the new jogging commands you are aiming at? Or are there other protocol features you miss?

michelcve commented 6 years ago

Wow, that comment was a year old, so I actually forgot about it ;-)

I've since moved to a different (commercial) product for my CNC, so I've kind of lost interest in grblWeb, sorry.

Protoneer commented 6 years ago

What did you move to?

On 11 Jan 2018 4:55 a.m., "michelcve" notifications@github.com wrote:

Wow, that comment was a year old, so I actually forgot about it ;-)

I've since moved to a different (commercial) product for my CNC, so I've kind of lost interest in grblWeb, sorry.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/andrewhodel/grblweb/issues/23#issuecomment-356645148, or mute the thread https://github.com/notifications/unsubscribe-auth/ADqFI_YDpi517ji8KoicPc4CKwjGe7rdks5tJN2AgaJpZM4Li5Tt .

hrobeers commented 6 years ago

@michelcve I actually just discovered grblweb and chose is because it does not require a screen attached to my PC that talks to the controller. As a software developer I can modify this code to my liking, so I'm wondering how grblweb turned you off.

michelcve commented 6 years ago

I switched to EstlCam. It's very reasonably priced, and does everything I need it to do.

Being a software developer, I understand that having the source code and being able to modify things is nice. But in the end, Estlcam simply does everything I want. And ultimately I started CNCing for the CNCing, not the programming (enough other projects to satisfy my programming needs anyway ;-)).

Hoangthoi commented 6 years ago

image

Hoangthoi commented 6 years ago

I installed grblweb raspberry pi 3. But it was like this, could anyone help me?