Exhaustive list of i3 Plus clones

andrivet commented 5 years ago

Today, there are many different clones of the Wanhao Duplicator i3 Plus, with small differences. In order to better support them in ADVi3++, I am trying to get an exhausitve list of these clones. So far, I have:

Name	Model #	Motherboard	Country	Hardware differences
Wanhao Duplicator i3 Plus	Bi3Plus	5.1	CN	Original printer
Monoprice Maker Select Plus	15711	5.1	US	Exact clone of i3 Plus
Monoprice Maker Select Plus "Euro"	21871	5.1	DE	Exact clone of i3 Plus
Monoprice Maker Select Plus "UK"	24165	5.1	UK	Exact clone of i3 Plus
Aldi Cocoon Create Touch	HE161192	5.1	AU	Exact clone of i3 Plus
Aldi Balco 3D Touchscreen	?	5.1	UK	No USB plug
Microcenter PowerSpec WanHao Duplicator I3 PLUS	422204	5.1	USA	Exact clone of i3 Plus
Wanhao Duplicator i3 Plus Mark II	wanhao.i3.plus.Mk2	5.4	CN	ABL, magnetic bed, power-loss recovery
Aldi Balco 3D Printer	HE180021	5.2C	UK	Between Mark I and Mark II, z-endtop = 6
Aldi Balco 3D Printer 12/2019	HE180021	5.1	Belgium	Exact clone of i3 Plus

Yes, there is two different models of printers with the name name and the same Model number (Aldi Balco 3D Printer | HE180021) but with different motherboards. Go figure...

If you are aware of another model (still based on the i3 PLUS), or if you know another model number, please add it in a comment.

Thanks

cobramike commented 5 years ago

I see you have for the Wanhao Duplicator i3 Plus a ? for the model. On my printer is saying model Bi3Plus

andrivet commented 5 years ago

@cobramike Thank, that's the model. I was not able to remember.

wood2dust commented 5 years ago

I can confirm that the model number is correct for the latest ALDI BALCO printer, what I am unsure of is can I flash this model with your firmware or will it brick it!, I am new to this 3d printing and only received my printer over xmas. Thanks

andrivet commented 5 years ago

@wood2dust No support here. Only on Patreon

halmjet commented 5 years ago

Hi. I have Geeetech A10 (old ver. ) Board is. GT 2560 rev b. I love your work. Thanks you very much.

andrivet commented 5 years ago

@halmjet the geeetech is not a clone of the wanaho i3 plus. I do not understand.

halmjet commented 5 years ago

I know. I modified my geeetech to work on your firmware and wonderful lcd.

Elfae commented 5 years ago

Hi. I have Wanhao Duplicator i3 Plus Mark II Board is. i3-Plus Mainboard v5.4 WhatsApp Image 2019-03-16 at 09 48 23 No Z-probe. How to connect BLTouch? Help me please! I love your work. Thanks you very much.

willsteeleuk commented 5 years ago

Hi,

As per the request, here are photos of the free pins on the HE180021 (V5.2c).

IMG_20190508_160252 IMG_20190508_160322

andrivet commented 5 years ago

J3: Pin 1 - 5v Pin 2 - PE4 (No Capacitor) Pin 3 - GND

extesy commented 5 years ago

@andrivet I was able to persuade Wanhao support team to publish the latest source code for i3 Plus Mark II: https://github.com/extesy/i3plus-MK2. Please take a look, maybe it will help you with implementing missing features like #205.

andrivet commented 5 years ago

@extesy Great. I will look at it.