andyvand / netbook-installer

Automatically exported from code.google.com/p/netbook-installer
1 stars 0 forks source link

10.6.5 Update Won't Boot. #311

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
After reading that 10.6.5 update was okay, performed update on Dell Mini 10.  
After reboot, saw Netbook Installer Icon, and it showed while booting for a 
very long time.  Then system restarted and I get apple and twirling wait 
inidcator but system never boots or panics.  Left it go for 3 hours and no 
change.

I tried SHIFT and then TAB and then -X and saw the apple logo and a loading bar 
underneath, tyhen it just went back to Apple with twirl.

Trying to boot off of USB OSX install disk, I saw something about "could not 
patch 64-bit" and then same thing.  Now, it gives me panic screen with 
UNSUPPORTED CPU (will look for that fix.)

Original issue reported on code.google.com by Mr.Byr...@gmail.com on 14 Nov 2010 at 2:53

GoogleCodeExporter commented 9 years ago
Tried booting with RECOVERY=Y and it will not start for me to run netbook 
installer.

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 2:59

GoogleCodeExporter commented 9 years ago
Can't boot of USB install disk, even trying recovery=y with it selected.

Says:

Panic(cpu 0 caller 0x1b58d8ac): "Unsupported CPU: family...." etc.

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 3:02

GoogleCodeExporter commented 9 years ago
Okay, after then trying to boot recovery=y off internal hard drive, for some 
reason this time it worked. I will run netbook installer then see if it fixes 
it.

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 3:05

GoogleCodeExporter commented 9 years ago
Okay, performed the removal of the unneeded graphics extensions as worked on 
the 10.6.4 update, reran NetbookInstaller 0.8.4 RC1 and restarted.

It worked...  Hmm, how do I self close this?

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 3:14

GoogleCodeExporter commented 9 years ago
Hold the phone... Lost my wireless networking...

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 3:17

GoogleCodeExporter commented 9 years ago
Okay, rerunning NetbookInstaller does not fix the networking kill.  It says no 
airport card installed.  Also, I can't reinstall from the USB OSX install as it 
says the "Patch 64-Bit" then panics to "unsupported CPU".

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 3:38

GoogleCodeExporter commented 9 years ago
Yup, reinstalled completely and 10.6.5 kills Dell Mini 10 networking.  Even 
after running Netbook Installer.

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 12:59

GoogleCodeExporter commented 9 years ago
Got it cured.  You need to use DROPBOX version from Meklort's WEB SITE...

Original comment by Mr.Byr...@gmail.com on 14 Nov 2010 at 1:46

GoogleCodeExporter commented 9 years ago
Is this the version at this URL: http://www.meklort.com/?p=262

Original comment by david.le...@gtempaccount.com on 14 Nov 2010 at 5:27

GoogleCodeExporter commented 9 years ago
Upgrading my Samsung N310 to 10.6.5 results in a kernel panic, then next reboot 
works.  Audio is killed, Bluetooth is killed.  Re-installing kexts via 
KextHelper and rebooting doesn't help with audio nor with Bluetooth on 10.6.5.

Running the Dropbox version of Netbook Installer on the N310 running 10.6.5 
results in a system which won't boot normally due to kernel panic.  Using the 
recovery=y flag allows the system to boot to the login screen, and while the 
trackpad can move the mouse cursor, the N310 will no longer accept keyboard 
input, nor will it allow the trackpad or trackpad button to click the mouse.

Plugging in a USB keyboard results in a message that the keyboard type must be 
identified by the user to work in OSX, but since one can't click the 'Continue' 
button on the wizard nor get the N310 to accept the <Enter> key on the built-in 
keyboard, this is a nonstarter.  

After trying various iterations involving AppleHDA.kext, 
BroadcomBluetooth.kext, NBI options, et. al., I've given up on 10.6.5 for now 
and restored a 10.6.4 pre-upgrade backup. I'm anxious to get on 10.6.5 because 
of all the security fixes, and would appreciate any clue/insight into getting 
10.6.5 working on a Samsung N310 with audio and Bluetooth working, as they do 
under 10.6.4.

Thanks!

Original comment by roland.d...@gmail.com on 21 Nov 2010 at 8:49

GoogleCodeExporter commented 9 years ago
I'm using a Samsung nf210.  The only way i could boot was with usb boot disk or 
by typing in arch=i386 recovery=y.  I edited the com.apple.boot.plist by 
putting arch=i386 between the >< under where it says kernel flags. Then i went 
to Go-Go to Folder-typed in /extra. Then i found the folder with all the kexts 
in it, right clicked copied that folder (mine was called GeneralExtensions) and 
pasted it to Desktop.  I then renamed it to Extensions and copied it back to 
extra folder, deleted the extension folder from the desktop and restarted 
machine.  My touchpad and webcam stopped working but all else is well.  When i 
get them working i'll post.

Original comment by gillespi...@gmail.com on 31 Jan 2011 at 2:19

GoogleCodeExporter commented 9 years ago
update for nf210.  I deleted the nv kexts in the S/L/E folder, repaired 
permissions and rebooted touchpad now works.  webcam works for facetime but not 
with photobooth.  still working on wireless.  temporarily using a dlink usb 
nano until i get my wireless going.osx drivers for the dlink can easily be 
downloaded.

Original comment by gillespi...@gmail.com on 1 Feb 2011 at 12:56

GoogleCodeExporter commented 9 years ago
update for nf210.  I deleted the nv kexts in the S/L/E folder, repaired 
permissions and rebooted touchpad now works.  webcam works for facetime but not 
with photobooth.  still working on wireless.  temporarily using a dlink usb 
nano until i get my wireless going.osx drivers for the dlink can easily be 
downloaded. Audio now works as well.  i used multibeast and loaded their voodoo 
drivers.

Original comment by gillespi...@gmail.com on 1 Feb 2011 at 1:00