Closed kadiev75 closed 1 year ago
logs\log.txt
"Settings"->"Advanced"-> Disable "Use OpenHardwareMonitor"
Now not even one is visible
Unzip this arhive https://github.com/angelbbs/NiceHashMinerLegacy/blob/master-old/LatestBuild/nhmlffLatest.zip to program folder with overwriting files
no change after placing the files, I have 15 rigs and this bug is there on all of them where there are AMD cards
Now Enable "Use OpenHardwareMonitor"
the second picture is with the option turned on
Libre Hardware Monitor ->File ->Save report... and send LibreHardwareMonitor.Report.txt
If you want, I can give you access to a rig so you can directly watch what you want?
It's not from the driver, it got fixed after I put the files, before that try a bunch of drivers :) Thank you very much, you are great :)
Disable ZIL mining on gminer 3.24 in the settings. At the moment it has errors in the API which has a bad effect on profitability
I don't see any performance loss, but I turned it off because it doesn't help either :)
Hastily I was happy with the other rig, there is a problem again, I copied the files, the driver is the same, the cards in the rig are exactly the same, but it only shows the data in half. I check with the GPU-Z program and there each card reports its sensors correctly. I ran LibreHardware in parallel and it doesn't correctly report all sensors on all cards. That's the problem, I think
Try disable "Use LibreHardwareMonitor"
Notice that the miner also shows all sensors
Пробуйте с выключеннрй опцией "Use Libre..." https://disk.yandex.ru/d/2D6vF27wBg-r6Q Затем присылайте log.txt
OpenHardwareMonitor https://www.softportal.com/getsoft-47555-open-hardware-monitor-2.html показывает значения на всех gpu? Пришлите OpenHardwareMonitor.Report.txt
Yes this program reports all sensors correctly OpenHardwareMonitor.Report.txt
Try https://disk.yandex.ru/d/2D6vF27wBg-r6Q and send log.txt
disable "Use LibreHardwareMonitor"
There is an improvement, the fans are visible
log.txt?
unchanged
Well done, now I will test on the other rigs and if everything is fine I will close the task :)
Try with the "Use Libre..." enabled
Everything seems ok here too
Does it matter if it gets released or not?
On all my rigs with AMD cards, only the second card in a row shows the power, the others do not show power.
It doesn't matter if it's 5 cards or 8 it still has this problem The problem does not exist with Nvidia cards
AMD Radion 6700 XT Driver version: 21.10.2 Windows IOT Miner Legasy Fork Fix 53 All miners