search

angusgbishop / PnPCAM

An Open Source Vision Camera designed for pick-and-place machines.
GNU General Public License v3.0
6 stars 0 forks source link

Mechanical Mounting #9

Open angusgbishop opened 3 years ago

angusgbishop commented 3 years ago

Current Mounting is designed for the Index Pick and Place's PEEK array of mounting holes. (M3 at 30x30mm)

However, the current revision of the board will likely fit inside a NEMA17 enclosure. Add additional drill holes at 31mmx31mm spacing to make it NEMA 17 compatible.

angusgbishop commented 3 years ago

Improvements can be made to reduce PCB size.

Current Target is 28mm x 28mm. It may still be possible to use the Peek array on the Index by rotating the board by 45deg. I'll need to do some investigation.

I will re-lay the circuit board and change the USB 3.1 Type B receptacle to a USB Type C to save most of the space. This will also help with the shadows caused by the current receptacle.