gsek78
commented
2 years ago Hi ,
one step forward ... but my experience on linux and programming stop me to solve the issue by myself ...
I found another guy that had the same issue and explained how to solve it :
https://community.home-assistant.io/t/legrand-bticino-myhome/229337/691 ( Thanks Douwe ! )
I would have liked to make the same modification by myself BUT I can't find the OWNd module and the file "message.py" on my homeassistant.
Can someone explain me where I can find it ? or maybe also better ... @anotherjulien can you made this modification directly on your HACS distro ?
Many thanks Gianluca
stefanorossiitaly
eliosbrocchi
caiosweet
Hi Julien ,
I installed your MyHome integration on my HomeAssistant but I have a problem on my installation. My home structure is make with F422 and I have differents local bus . ( three , one each floor ) All "BUS 0" lights are working well but how I can address the light on a different bus ?
Looking at
https://developer.legrand.com/uploads/2019/12/WHO_1.pdf ( page 7 ) https://developer.legrand.com/uploads/2019/12/OWN_Intro_ENG.pdf ( page 13 )
I tried with light device address Point to Point A=03 PL=03 on local bus 01 putting : where: '33#4#01' or where: '0303#4#01'
but without success ...
I tried to put only : where: '33' and I can see the light STATUS working but I can't send any command by HomeAssitant.
There are other possibilities to specify the right light address on different bus or you need to adapt your code to include this possibility?
Many thanks Gianluca