Closed fk-brambles closed 2 weeks ago
@fk-brambles Thank you for submitting this issue! Would you be willing to submit a PR to fix it?
Hello Helen thanks for contacting me. I am not familiar with Pull Requests. what would you like me to do? thanks for your help and best regards Francois
From: Helen Bailey @.> Sent: Wednesday, July 24, 2024 8:34 AM To: ansible-collections/amazon.aws @.> Cc: Francois Keen @.>; Mention @.> Subject: Re: [ansible-collections/amazon.aws] amazon.aws.rds_cluster Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBCl...
@ fk-brambles Thank you for submitting this issue! Would you be willing to submit a PR to fix it? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned. Message ID: ansible-collections/amazon. aws/issues/2197/2247801458@ github. com ZjQcmQRYFpfptBannerStart This Message Is From an External Sender This message came from outside your organization.
ZjQcmQRYFpfptBannerEnd
@fk-brambleshttps://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDbyB0WsT$ Thank you for submitting this issue! Would you be willing to submit a PR to fix it?
— Reply to this email directly, view it on GitHubhttps://urldefense.com/v3/__https://github.com/ansible-collections/amazon.aws/issues/2197*issuecomment-2247801458__;Iw!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDT-OWVrX$, or unsubscribehttps://urldefense.com/v3/__https://github.com/notifications/unsubscribe-auth/BFJX5E64SKVOUZHJNXEZHFLZN6NNDAVCNFSM6AAAAABLA7QRTKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBXHAYDCNBVHA__;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDStFMuJy$. You are receiving this because you were mentioned.Message ID: @.***>
Visit our website: http://www.chep.com AVERTISSEMENT : ce courrier électronique ainsi que toutes les pièces jointes s’y rapportant doivent être exclusivement utilisés par les personnes auxquelles ils sont destinés. Ils sont susceptibles de contenir des informations confidentielles. Si vous n'êtes pas ni la personne destinataire de ce message, ni un salarié ou un mandataire chargé de transmettre ce message à son destinataire, veuillez noter que toute diffusion, distribution, copie ou autre utilisation du présent message et/ ou de ses pièces jointes est formellement interdite. Si vous avez reçu ce message par erreur, nous vous remercions d'en informer l'expéditeur immédiatement en répondant à son message et de le supprimer de votre ordinateur. Merci. Confidentiality Notice: This email is intended only for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. .
Hello Helen thanks for contacting me. I am not familiar with Pull Requests. what would you like me to do? thanks for your help and best regards Francois … ____ From: Helen Bailey @.> Sent: Wednesday, July 24, 2024 8:34 AM To: ansible-collections/amazon.aws @.> Cc: Francois Keen @.>; Mention @.> Subject: Re: [ansible-collections/amazon.aws] amazon.aws.rds_cluster Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBCl... @ fk-brambles Thank you for submitting this issue! Would you be willing to submit a PR to fix it? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned. Message ID: ansible-collections/amazon. aws/issues/2197/2247801458@ github. com ZjQcmQRYFpfptBannerStart This Message Is From an External Sender This message came from outside your organization. ZjQcmQRYFpfptBannerEnd @fk-brambleshttps://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDbyB0WsT$ Thank you for submitting this issue! Would you be willing to submit a PR to fix it? — Reply to this email directly, view it on GitHubhttps://urldefense.com/v3/__https://github.com/ansible-collections/amazon.aws/issues/2197*issuecomment-2247801458__;Iw!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDT-OWVrX$, or unsubscribehttps://urldefense.com/v3/__https://github.com/notifications/unsubscribe-auth/BFJX5E64SKVOUZHJNXEZHFLZN6NNDAVCNFSM6AAAAABLA7QRTKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBXHAYDCNBVHA__;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDStFMuJy$. You are receiving this because you were mentioned.Message ID: @.***> Visit our website: http://www.chep.com AVERTISSEMENT : ce courrier électronique ainsi que toutes les pièces jointes s’y rapportant doivent être exclusivement utilisés par les personnes auxquelles ils sont destinés. Ils sont susceptibles de contenir des informations confidentielles. Si vous n'êtes pas ni la personne destinataire de ce message, ni un salarié ou un mandataire chargé de transmettre ce message à son destinataire, veuillez noter que toute diffusion, distribution, copie ou autre utilisation du présent message et/ ou de ses pièces jointes est formellement interdite. Si vous avez reçu ce message par erreur, nous vous remercions d'en informer l'expéditeur immédiatement en répondant à son message et de le supprimer de votre ordinateur. Merci. Confidentiality Notice: This email is intended only for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. .
Hi @fk-brambles , PR #2215 should solve the issue. Would be great if you could give it a try. Thanks!
thanks Mandar for the quick response.
I updated ~/ansible-10.1.0/lib/python3.11/site-packages/ansible_collections/amazon/aws/plugins/modules/rds_cluster.pyhttps://github.com/ansible-collections/amazon.aws/pull/2215/files#diff-41d80755edc72340b8c75ea1d8c215e8e9b974de3ffe70e2bd0538c37baa2f0a with the latest code and the symptom is the same:
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: Unknown parameter in input: "ApplyImmediately", must be one of: DBClusterIdentifier [WARNING]: Module did not set no_log for force_update_password fatal: [rds-mydb-tst -> localhost]: FAILED! => {"boto3_version": "1.34.144", "botocore_version": "1.34.144", "changed": false, "msg": "Unexpected failure for method stop_db_cluster with parameters {'BackupRetentionPeriod': 1, 'DBClusterIdentifier': 'aurpostdb-mydb-devtest1', 'ApplyImmediately': True}: Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBClusterIdentifier"}
is there anything else I need to update to test your commit?
thanks for your help.
From: Mandar Kulkarni @.> Sent: Thursday, August 8, 2024 1:36 PM To: ansible-collections/amazon.aws @.> Cc: Francois Keen @.>; Mention @.> Subject: Re: [ansible-collections/amazon.aws] amazon.aws.rds_cluster Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBCl...
This Message Is From an External Sender This message came from outside your organization.
Hello Helen thanks for contacting me. I am not familiar with Pull Requests. what would you like me to do? thanks for your help and best regards Francois … ____ From: Helen Bailey @.> Sent: Wednesday, July 24, 2024 8:34 AM To: ansible-collections/amazon.aws @.> Cc: Francois Keen @.>; Mention @.> Subject: Re: [ansible-collections/amazon.aws] amazon.aws.rds_cluster Parameter validation failed:\nUnknown parameter in input: "BackupRetentionPeriod", must be one of: DBClusterIdentifier\nUnknown parameter in input: "ApplyImmediately", must be one of: DBCl... @ fk-brambles Thank you for submitting this issue! Would you be willing to submit a PR to fix it? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned. Message ID: ansible-collections/amazon. aws/issues/2197/2247801458@ github. com ZjQcmQRYFpfptBannerStart This Message Is From an External Sender This message came from outside your organization. ZjQcmQRYFpfptBannerEnd @fk-brambleshttps://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!UEvKGclkAF7TKgTWhHz9WAsAEUWpvd9a688_9lJ_joEQhs9jfNjMoDq2nGzPI7ceynvRGJqf-u_BQ3-e2H9KCvD9O5-W$https://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDbyB0WsT$ Thank you for submitting this issue! Would you be willing to submit a PR to fix it? — Reply to this email directly, view it on GitHubhttps://urldefense.com/v3/https://github.com/ansible-collections/amazon.aws/issues/2197*issuecomment-2247801458;Iw!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDT-OWVrX$, or unsubscribehttps://urldefense.com/v3/https://github.com/notifications/unsubscribe-auth/BFJX5E64SKVOUZHJNXEZHFLZN6NNDAVCNFSM6AAAAABLA7QRTKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBXHAYDCNBVHA;!!HDu-1JFExg!U3ZHS7mcVJ05HfD2LwjBa8Wa-vkp-zKBENLlHlRXY6ldvMxbJeZ74yolvOr6lbVbg3KWpxxEq4IPRxE8xdjkDStFMuJy$. You are receiving this because you were mentioned.Message ID: @.***> Visit our website: http://www.chep.com AVERTISSEMENT : ce courrier électronique ainsi que toutes les pièces jointes s’y rapportant doivent être exclusivement utilisés par les personnes auxquelles ils sont destinés. Ils sont susceptibles de contenir des informations confidentielles. Si vous n'êtes pas ni la personne destinataire de ce message, ni un salarié ou un mandataire chargé de transmettre ce message à son destinataire, veuillez noter que toute diffusion, distribution, copie ou autre utilisation du présent message et/ ou de ses pièces jointes est formellement interdite. Si vous avez reçu ce message par erreur, nous vous remercions d'en informer l'expéditeur immédiatement en répondant à son message et de le supprimer de votre ordinateur. Merci. Confidentiality Notice: This email is intended only for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. .
Hi @fk-brambleshttps://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!UEvKGclkAF7TKgTWhHz9WAsAEUWpvd9a688_9lJ_joEQhs9jfNjMoDq2nGzPI7ceynvRGJqf-u_BQ3-e2H9KCvD9O5-W$ , PR #2215https://urldefense.com/v3/__https://github.com/ansible-collections/amazon.aws/pull/2215__;!!HDu-1JFExg!UEvKGclkAF7TKgTWhHz9WAsAEUWpvd9a688_9lJ_joEQhs9jfNjMoDq2nGzPI7ceynvRGJqf-u_BQ3-e2H9KCkb9iv8H$ should solve the issue. Would be great if you could give it a try. Thanks!
— Reply to this email directly, view it on GitHubhttps://urldefense.com/v3/__https://github.com/ansible-collections/amazon.aws/issues/2197*issuecomment-2276337012__;Iw!!HDu-1JFExg!UEvKGclkAF7TKgTWhHz9WAsAEUWpvd9a688_9lJ_joEQhs9jfNjMoDq2nGzPI7ceynvRGJqf-u_BQ3-e2H9KCn-aDwWH$, or unsubscribehttps://urldefense.com/v3/__https://github.com/notifications/unsubscribe-auth/BFJX5E5QVQAEWL5QLGFBB3TZQOUDLAVCNFSM6AAAAABLA7QRTKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENZWGMZTOMBRGI__;!!HDu-1JFExg!UEvKGclkAF7TKgTWhHz9WAsAEUWpvd9a688_9lJ_joEQhs9jfNjMoDq2nGzPI7ceynvRGJqf-u_BQ3-e2H9KCskChoEM$. You are receiving this because you were mentioned.
@fk-brambles based on my testing likely the PR changes should fix the issue as the code removes other parameters like BackupRetentionPeriod
that are not expected by the method stop_db_clsuter
.
Can you please check again if the playbook is using the correct code? also would be helpful if you can share the playbook that you are running, I could give it a try to reproduce the issue on my end. Thanks!
Hello Mandar
here's the playbook to stop the DB:
From: Mandar Kulkarni @.> Sent: Thursday, August 8, 2024 2:12 PM To: ansible-collections/amazon.aws @.> Cc: Francois Keen @.>; Mention @.> Subject: Re: [ansible-collections/amazon.aws] amazon.aws.rds_cluster Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBCl...
This Message Is From an External Sender This message came from outside your organization.
@fk-brambleshttps://urldefense.com/v3/__https://github.com/fk-brambles__;!!HDu-1JFExg!TKhCgKdxz3Jh21sQJZx_nbrhw_ZKO-AthkJtKTd4oTxvv3vR4KTNYlERGoXXDgtnRO0txYeEfYFU-Bh2Mr2SgniX50JN$ based on my testing likely the PR changes should fix the issue as the code removes other parameters like BackupRetentionPeriod that are not expected by the method stop_db_clsuter. Can you please check again if the playbook is using the correct code? also would be helpful if you can share the playbook that you are running, I could give it a try to reproduce the issue on my end. Thanks!
— Reply to this email directly, view it on GitHubhttps://urldefense.com/v3/__https://github.com/ansible-collections/amazon.aws/issues/2197*issuecomment-2276394728__;Iw!!HDu-1JFExg!TKhCgKdxz3Jh21sQJZx_nbrhw_ZKO-AthkJtKTd4oTxvv3vR4KTNYlERGoXXDgtnRO0txYeEfYFU-Bh2Mr2SgvgWaqgs$, or unsubscribehttps://urldefense.com/v3/__https://github.com/notifications/unsubscribe-auth/BFJX5EY5HMWDCV2RKGU53TDZQOYJRAVCNFSM6AAAAABLA7QRTKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENZWGM4TINZSHA__;!!HDu-1JFExg!TKhCgKdxz3Jh21sQJZx_nbrhw_ZKO-AthkJtKTd4oTxvv3vR4KTNYlERGoXXDgtnRO0txYeEfYFU-Bh2Mr2SguLxKpEd$. You are receiving this because you were mentioned.
Visit our website: http://www.chep.com AVERTISSEMENT : ce courrier électronique ainsi que toutes les pièces jointes s’y rapportant doivent être exclusivement utilisés par les personnes auxquelles ils sont destinés. Ils sont susceptibles de contenir des informations confidentielles. Si vous n'êtes pas ni la personne destinataire de ce message, ni un salarié ou un mandataire chargé de transmettre ce message à son destinataire, veuillez noter que toute diffusion, distribution, copie ou autre utilisation du présent message et/ ou de ses pièces jointes est formellement interdite. Si vous avez reçu ce message par erreur, nous vous remercions d'en informer l'expéditeur immédiatement en répondant à son message et de le supprimer de votre ordinateur. Merci. Confidentiality Notice: This email is intended only for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. .
thank you @mandar242 for the code update. I updated rds_cluster.py with the latest code and it is still not working, it still produces a:
[WARNING]: Module did not set no_log for force_update_password fatal: [rds-APP0002662-tst -> localhost]: FAILED! => {"boto3_version": "1.34.144", "botocore_version": "1.34.144", "changed": false, "msg": "Unexpected failure for method stop_db_cluster with parameters {'BackupRetentionPeriod': 1, 'DBClusterIdentifier': 'aurpostdb-mydb-devtest1', 'ApplyImmediately': True}: Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBClusterIdentifier"}
[WARNING]: Module did not set no_log for force_update_password fatal: [rds-APP0002662-tst -> localhost]: FAILED! => {"boto3_version": "1.34.144", "botocore_version": "1.34.144", "changed": false, "msg": "Unexpected failure for method start_db_cluster with parameters {'BackupRetentionPeriod': 1, 'DBClusterIdentifier': 'aurpostdb-mydb-devtest1', 'ApplyImmediately': True}: Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBClusterIdentifier"}
May you please have a look? thank you
Ran into the same issue as reported-I saw the code was merged to main to resolve the issue. But I assume this fix will not be applied until a new release? If so, where could I track this release? I didn't see a way to do so. Wrote a playbook to initiate a "lights out/ on" policy that shuts down rds_clusters and instances. Instance module seems to be fine, but the rds_cluster module is where this fails with the same error as the reporter.
- block:
- name: shutdown clusters
amazon.aws.rds_cluster:
region: us-east-1
access_key: "{{ assumed_role_prod.sts_creds.access_key }}"
secret_key: "{{ assumed_role_prod.sts_creds.secret_key }}"
session_token: "{{ assumed_role_prod.sts_creds.session_token }}"
db_cluster_identifier: '{{ item }}'
state: stopped
wait: false
with_items: "{{ prod_clusters_nonexempt }}"
when: prod_clusters_nonexempt is defined
register: prod_clusters_shutdown
- name: shutdown instances
amazon.aws.rds_instance:
region: us-east-1
access_key: "{{ assumed_role_prod.sts_creds.access_key }}"
secret_key: "{{ assumed_role_prod.sts_creds.secret_key }}"
session_token: "{{ assumed_role_prod.sts_creds.session_token }}"
db_instance_identifier: '{{ item }}'
state: stopped
wait: false
with_items: "{{ prod_instances_nonexempt }}"
when: prod_instances_nonexempt is defined
register: prod_instances_shutdown
rescue:
- name: send notification via teams when shutdown fails
community.general.office_365_connector_card:
webhook: "{{ webhook }}"
title: "LightsOut playbook failed for Prod"
summary: "The LightsOut playbook experienced an error "
text: "Check job {{ tower_job_id }} for LightsOut playbook failure"
@randoneering
The change has also been backported to our "stable-8" branch (https://github.com/ansible-collections/amazon.aws/pull/2252) which means that it should be available once 8.2.0 is available
https://github.com/ansible-collections/amazon.aws/pull/2277 is one of the last housekeeping pieces prior to the release of 8.2.0 so the best place to watch is there. Assuming there aren't any last minute surprises, I hope 8.2.0 will be available within the next 24 hours...
For what it's worth, we try to follow a roughly monthly release cadence for minor releases, and roughly a 6-month release cadence for major releases (usually bumping at least the botocore requirements). In theory you can watch this repo for "releases" (which should be triggered by the same process that performs the release into Ansible Galaxy), but it's not something I've tried before...
thank you all and @mandar242 and @tremble - I confirm that with amazon.aws collection 8.2.0, the stop start works. thank you.
I noticed that with the parameter "state: stopped", it doesn't wait for the DB status be fully "Stopped" (i.e. the Ansible module returns "changed" pretty much instantly as soon as the DB status is "stopping"), whereas with the parameter "state: started", it waits for DB status to be "available". Should I log this as an issue or is it indented to behave like this?
Thanks again for all your support.
@tremble thank you for the info! I too, can confirm, that the fix is working for the rds_cluster module now. Thank you all for the help/info.
Summary
when trying to interact with an RDS cluster (using amazon.aws.rds_cluster), it fails with
Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBClusterIdentifier"}
Issue Type
Bug Report
Component Name
amazon.aws.rds_cluster
Ansible Version
ansible [core 2.17.2] config file = /etc/ansible/ansible.cfg configured module search path = ['/home/myuser/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules'] ansible python module location = /home/myuser/ansible-10.1.0/lib/python3.11/site-packages/ansible ansible collection location = /home/myuser/.ansible/collections:/usr/share/ansible/collections executable location = /home/myuser/ansible-10.1.0/bin/ansible python version = 3.11.6 (main, Nov 2 2023, 15:15:45) [GCC 8.5.0 20210514 (Red Hat 8.5.0-18)] (/home/myuser/ansible-10.1.0/bin/python3) jinja version = 3.1.4 libyaml = True
Collection Versions
/home/myuser/.ansible/collections/ansible_collections
Collection Version
amazon.aws 8.1.0 ansible.posix 1.3.0 ansible.windows 2.1.0 community.aws 6.4.0 community.general 4.0.0 community.libvirt 1.2.0 community.postgresql 2.1.5 containers.podman 1.9.3
/home/myuser/ansible-10.1.0/lib/python3.11/site-packages/ansible_collections
Collection Version
amazon.aws 8.0.1 ansible.netcommon 6.1.3 ansible.posix 1.5.4 ansible.utils 4.1.0 ansible.windows 2.4.0 arista.eos 9.0.0 awx.awx 24.5.0 azure.azcollection 2.4.0 check_point.mgmt 5.2.3 chocolatey.chocolatey 1.5.1 cisco.aci 2.9.0 cisco.asa 5.0.1 cisco.dnac 6.16.0 cisco.intersight 2.0.9 cisco.ios 8.0.0 cisco.iosxr 9.0.0 cisco.ise 2.9.2 cisco.meraki 2.18.1 cisco.mso 2.6.0 cisco.nxos 8.1.0 cisco.ucs 1.10.0 cloud.common 3.0.0 cloudscale_ch.cloud 2.3.1 community.aws 8.0.0 community.ciscosmb 1.0.9 community.crypto 2.20.0 community.digitalocean 1.26.0 community.dns 3.0.1 community.docker 3.10.4 community.general 9.1.0 community.grafana 1.9.1 community.hashi_vault 6.2.0 community.hrobot 2.0.1 community.library_inventory_filtering_v1 1.0.1 community.libvirt 1.3.0 community.mongodb 1.7.4 community.mysql 3.9.0 community.network 5.0.3 community.okd 3.0.1 community.postgresql 3.4.1 community.proxysql 1.5.1 community.rabbitmq 1.3.0 community.routeros 2.16.0 community.sap_libs 1.4.2 community.sops 1.6.7 community.vmware 4.4.0 community.windows 2.2.0 community.zabbix 2.5.1 containers.podman 1.15.2 cyberark.conjur 1.3.0 cyberark.pas 1.0.25 dellemc.enterprise_sonic 2.4.0 dellemc.openmanage 9.3.0 dellemc.powerflex 2.5.0 dellemc.unity 2.0.0 f5networks.f5_modules 1.28.0 fortinet.fortimanager 2.5.0 fortinet.fortios 2.3.6 frr.frr 2.0.2 google.cloud 1.3.0 grafana.grafana 5.2.0 hetzner.hcloud 3.1.1 ibm.qradar 3.0.0 ibm.spectrum_virtualize 2.0.0 ibm.storage_virtualize 2.3.1 ieisystem.inmanage 2.0.0 infinidat.infinibox 1.4.5 infoblox.nios_modules 1.6.1 inspur.ispim 2.2.3 inspur.sm 2.3.0 junipernetworks.junos 8.0.0 kaytus.ksmanage 1.2.2 kubernetes.core 3.2.0 lowlydba.sqlserver 2.3.3 microsoft.ad 1.6.0 netapp.cloudmanager 21.22.1 netapp.ontap 22.11.0 netapp.storagegrid 21.12.0 netapp_eseries.santricity 1.4.0 netbox.netbox 3.19.1 ngine_io.cloudstack 2.3.0 ngine_io.exoscale 1.1.0 openstack.cloud 2.2.0 openvswitch.openvswitch 2.1.1 ovirt.ovirt 3.2.0 purestorage.flasharray 1.28.1 purestorage.flashblade 1.17.0 sensu.sensu_go 1.14.0 splunk.es 3.0.0 t_systems_mms.icinga_director 2.0.1 telekom_mms.icinga_director 2.1.2 theforeman.foreman 4.0.0 vmware.vmware_rest 3.0.1 vultr.cloud 1.13.0 vyos.vyos 4.1.0 wti.remote 1.0.5
AWS SDK versions
Name: boto Version: 2.49.0 Summary: Amazon Web Services Library Home-page: https://github.com/boto/boto/ Author: Mitch Garnaat Author-email: mitch@garnaat.com License: MIT Location: /home/myuser/ansible-10.1.0/lib/python3.11/site-packages Requires: Required-by:
Name: boto3 Version: 1.34.144 Summary: The AWS SDK for Python Home-page: https://github.com/boto/boto3 Author: Amazon Web Services Author-email: License: Apache License 2.0 Location: /home/myuser/ansible-10.1.0/lib/python3.11/site-packages Requires: botocore, jmespath, s3transfer Required-by:
Name: botocore Version: 1.34.144 Summary: Low-level, data-driven core of boto 3. Home-page: https://github.com/boto/botocore Author: Amazon Web Services Author-email: License: Apache License 2.0 Location: /home/myuser/ansible-10.1.0/lib/python3.11/site-packages Requires: jmespath, python-dateutil, urllib3 Required-by: boto3, s3transfer
Configuration
CONFIG_FILE() = /etc/ansible/ansible.cfg DEFAULT_FORKS(/etc/ansible/ansible.cfg) = 50 DEFAULT_VAULT_PASSWORD_FILE(/etc/ansible/ansible.cfg) = /home/myuser/.vaultPassword INTERPRETER_PYTHON(/etc/ansible/ansible.cfg) = auto_silent PERSISTENT_COMMAND_TIMEOUT(/etc/ansible/ansible.cfg) = 10 PERSISTENT_CONNECT_RETRY_TIMEOUT(/etc/ansible/ansible.cfg) = 30 PERSISTENT_CONNECT_TIMEOUT(/etc/ansible/ansible.cfg) = 30
OS / Environment
RHEL8
Steps to Reproduce
Expected Results
i expect the database to stop
Actual Results
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: Unknown parameter in input: "ApplyImmediately", must be one of: DBClusterIdentifier [WARNING]: Module did not set no_log for force_update_password fatal: [rds-mydb-tst -> localhost]: FAILED! => {"boto3_version": "1.34.144", "botocore_version": "1.34.144", "changed": false, "msg": "Unexpected failure for method stop_db_cluster with parameters {'BackupRetentionPeriod': 1, 'DBClusterIdentifier': 'aurpostdb-mydb-devtest1', 'ApplyImmediately': True}: Parameter validation failed:\nUnknown parameter in input: \"BackupRetentionPeriod\", must be one of: DBClusterIdentifier\nUnknown parameter in input: \"ApplyImmediately\", must be one of: DBClusterIdentifier"}
Code of Conduct