A few days ago I bought an IP camera of the Sannce brand, model i41cb. I already had the same older model but hardware is different.
By default, I was able to access camera via telnet with user: root / password: cxlinux.
Goke Version: 3.4.2.0919
Chip version: GK7012s
The open ports by default are as follows:
PORT STATE SERVICE
23/tcp open telnet
80/tcp open http
554/tcp open rtsp
843/tcp open unknown
5050/tcp open mmcc
The read-only hack has worked for me but I have not managed to change the password of telnet and ssh.
Changing password for root
New password:
Retype password:
passwd: can't create '/etc/shadow+': Read-only file system
passwd: can't update password file /etc/shadow
Hello,
A few days ago I bought an IP camera of the Sannce brand, model i41cb. I already had the same older model but hardware is different. By default, I was able to access camera via telnet with user: root / password: cxlinux. Goke Version: 3.4.2.0919 Chip version: GK7012s The open ports by default are as follows:
The read-only hack has worked for me but I have not managed to change the password of telnet and ssh.