when i connect to port 3201 i get like a debug lootlog? IDK...
========v2 pthread statck size 65536===
========v2 pthread statck size 65536===
========v2 pthread statck size 65536===
---------open /home/reboot.time failed
stat check system time!!!!!!
ctp_proc_live_video, mt=1
CTP Server Started at 8001
setsockopt IP_ADD_MEMBERSHIP: No such device
no hswl board, exit hswl_task!
-------------------eye+ init---------------
vendor.moduleid: eyeplus_ipc_gk_005
=============CreateDevicePtz OK =============
CreateDevicePlayback
eye+ sdk version: 10823
get_ipaddr ioctl error and errno=99 interface_name = wlan0
not valid ip:
----------->GetDeviceId buf AJWL190426101BQLJC2OGO6NBG147781
--------------DevSystem_GetMacAddr MAC: 304a269125c0
[p2pwrapper] [08:00:12] [1995522848] LogOn SVN Info[@000]
eye+ : wait for lan ok 0S
GetDefaultConfig, get DeviceType: {"gateway":"Off"}
APModePlay = Yes
TransmitStatistics = No
LiveCtrl = Yes
APModePlay = Yes
APModePlay = Yes
AudioEncode = G711A
inlanPlay = Yes
=============>DevVideo_GetSize called
getMainStreamVideoSize: w 1920 h 1080 [res = 0xa]
get_ipaddr ioctl error and errno=99 interface_name = wlan0
not valid ip:
[OnStatus]--------status: 0x103
[OnStatus]--------logging!
==============>SetAntiflicker called frequence = 50
p_devcfg_param->camSensorPara.powerLineFrequencyMode 0 setPowerFrequency 0
==============>Rotate called angle = 0
cameraMirror same mirror, do not effect!
=============>SetQuality called quality = 1 chan = 0
video sensitivity(80)
Buzzer = Yes
OnBuzzer: on=0, time=0
SupportPTZ = Yes
SetPresetPosition: on:2, position:0.010356,0.000001,0.010357, timeout:2
SDCard = Yes
APP SetRecordMode: mode=1
device setSdRecordMode: mode=0
sd record already in mode [0], do not config again
on: 0
micStatus already in status [0], do not config again
audio sensitivity(90)
==============>SetNightMode mode = 2
-------------timezone is 3600
=============>DevVideo_GetSize called
getMainStreamVideoSize: w 1920 h 1080 [res = 0xa]
setTimezone fd 42
SetTimezone buf GMT-01:00
set time!!!!!
Light = No
no support autotracking
AutoTracking = No
[OnStatus]--------status: 0x106
[OnStatus]--------logout server success!
wlan0 is linked.
========v2 pthread statck size 65536===
start udhcpc on wlan0........
get_ipaddr ioctl error and errno=99 interface_name = wlan0
wlan0: ip = 192.168.1.217, subnet = 255.255.255.0, router = 192.168.1.254, dns = 192.168.1.100
router is set
****set_gateway : 192.168.1.254
del_gateway ioctl error and errno=3
dns server address 1 = 192.168.1.100
dns server address 2 = 0.0.0.0
Write dns server address 1 ok.
set dns ok without restart.
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed --------------------------Here I covered the sensor to try and see what it called
gk_isp_daynight sensorModel 16396
getVideoStandard : 0
[gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:12
[gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:12
gk_isp_daynight: set day mode
sensorType2Name, type=14
try section isp_sc2235_day...
process image.ini section: isp_sc2235_day
cst.auto = 1
cst.auto=1, cst.autoStrength=-1
IR CUT in Day Mode.
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
sync time failed
EVENT: MOTION detect.
sync time failed
EVENT: MOTION detect.
sync time failed
gk_isp_daynight sensorModel 16396
getVideoStandard : 0
[gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:8
[gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:8
gk_isp_daynight: set night mode
sensorType2Name, type=14
try section isp_sc2235_night...
process image.ini section: isp_sc2235_night
cst.auto = 0
cst.auto=0, cst.autoStrength=48
sync time failed
IR CUT in Night Mode.
sync time failed
sync time failed
sync time failed
gk_isp_daynight sensorModel 16396
getVideoStandard : 0
[gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:12
[gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:12
gk_isp_daynight: set day mode
sensorType2Name, type=14
try section isp_sc2235_day...
process image.ini section: isp_sc2235_day
cst.auto = 1
cst.auto=1, cst.autoStrength=2081536
when i connect to port 3201 i get like a debug lootlog? IDK...
========v2 pthread statck size 65536=== ========v2 pthread statck size 65536=== ========v2 pthread statck size 65536=== ---------open /home/reboot.time failed stat check system time!!!!!! ctp_proc_live_video, mt=1 CTP Server Started at 8001 setsockopt IP_ADD_MEMBERSHIP: No such device no hswl board, exit hswl_task! -------------------eye+ init--------------- vendor.moduleid: eyeplus_ipc_gk_005 =============CreateDevicePtz OK ============= CreateDevicePlayback eye+ sdk version: 10823 get_ipaddr ioctl error and errno=99 interface_name = wlan0 not valid ip: ----------->GetDeviceId buf AJWL190426101BQLJC2OGO6NBG147781 --------------DevSystem_GetMacAddr MAC: 304a269125c0 [p2pwrapper] [08:00:12] [1995522848] LogOn SVN Info[@000] eye+ : wait for lan ok 0S GetDefaultConfig, get DeviceType: {"gateway":"Off"} APModePlay = Yes TransmitStatistics = No LiveCtrl = Yes APModePlay = Yes APModePlay = Yes AudioEncode = G711A inlanPlay = Yes =============>DevVideo_GetSize called getMainStreamVideoSize: w 1920 h 1080 [res = 0xa] get_ipaddr ioctl error and errno=99 interface_name = wlan0 not valid ip: [OnStatus]--------status: 0x103 [OnStatus]--------logging! ==============>SetAntiflicker called frequence = 50 p_devcfg_param->camSensorPara.powerLineFrequencyMode 0 setPowerFrequency 0 ==============>Rotate called angle = 0 cameraMirror same mirror, do not effect! =============>SetQuality called quality = 1 chan = 0 video sensitivity(80) Buzzer = Yes OnBuzzer: on=0, time=0 SupportPTZ = Yes SetPresetPosition: on:2, position:0.010356,0.000001,0.010357, timeout:2 SDCard = Yes APP SetRecordMode: mode=1 device setSdRecordMode: mode=0 sd record already in mode [0], do not config again on: 0 micStatus already in status [0], do not config again audio sensitivity(90) ==============>SetNightMode mode = 2 -------------timezone is 3600 =============>DevVideo_GetSize called getMainStreamVideoSize: w 1920 h 1080 [res = 0xa] setTimezone fd 42 SetTimezone buf GMT-01:00
set time!!!!! Light = No no support autotracking AutoTracking = No [OnStatus]--------status: 0x106 [OnStatus]--------logout server success! wlan0 is linked. ========v2 pthread statck size 65536=== start udhcpc on wlan0........ get_ipaddr ioctl error and errno=99 interface_name = wlan0 wlan0: ip = 192.168.1.217, subnet = 255.255.255.0, router = 192.168.1.254, dns = 192.168.1.100 router is set ****set_gateway : 192.168.1.254 del_gateway ioctl error and errno=3 dns server address 1 = 192.168.1.100 dns server address 2 = 0.0.0.0 Write dns server address 1 ok. set dns ok without restart. sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed --------------------------Here I covered the sensor to try and see what it called gk_isp_daynight sensorModel 16396 getVideoStandard : 0 [gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:12 [gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:12 gk_isp_daynight: set day mode sensorType2Name, type=14 try section isp_sc2235_day... process image.ini section: isp_sc2235_day cst.auto = 1 cst.auto=1, cst.autoStrength=-1
IR CUT in Day Mode.
sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed sync time failed EVENT: MOTION detect. sync time failed EVENT: MOTION detect. sync time failed gk_isp_daynight sensorModel 16396 getVideoStandard : 0 [gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:8 [gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:8 gk_isp_daynight: set night mode sensorType2Name, type=14 try section isp_sc2235_night... process image.ini section: isp_sc2235_night cst.auto = 0 cst.auto=0, cst.autoStrength=48 sync time failed
IR CUT in Night Mode.
sync time failed sync time failed sync time failed gk_isp_daynight sensorModel 16396 getVideoStandard : 0 [gk_isp_daynight]gadi_venc_set_framerate:streamid:0,fps:12 [gk_isp_daynight]gadi_venc_set_framerate:streamid:1,fps:12 gk_isp_daynight: set day mode sensorType2Name, type=14 try section isp_sc2235_day... process image.ini section: isp_sc2235_day cst.auto = 1 cst.auto=1, cst.autoStrength=2081536
IR CUT in Day Mode.
Error invalid alpha [0.0, 1.0].