Open albenex opened 3 years ago
Hello albenex! You can try the port 8001. In my camera, it's a clone of port 554.
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:7101 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:7103 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:8001 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:3201 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:6670 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN
Another option is a little more complicated: you can use the dropbearmulti binary available in this github repository to connect to a SSH server in your raspberry PI. Using the dropbear client (dbclient), open a SSH tunnel mapping the remote port on you raspberry, let's say, 64554, to the local 554 port. To avoid being asked for credentials, you export the environment variable DROPBEAR_PASSWORD
and dbclient will use it automagically!
I do something very similar with the following code inside debug_cmd.sh
. It has been working like a charm!
# Custom Environment Variables.
export DROPBEAR_PASSWORD=<password>
# Enable SSH Tunnel.
while true
do
sleep 60 # Wait 60 secs and repeat every minute.
# Check whether dbclient is running.
if ! ps | grep "dropbearmulti\sdbclient" >/dev/null
then
/mnt/mmc01/0/bin/dropbearmulti dbclient -N -f -y -g -R 64554:localhost:554 <user>@<server_ip_or_dns>/<ssh_port>
fi
done &
I actually use it to get past a NAT444 that my ISP has deployed on 4G networks. My first option was using a VPN (like WireGuard), but I couldn't find a client already compiled for this architecture (ARMv6), unfortunately.
Hello albenex! You can try the port 8001. In my camera, it's a clone of port 554.
Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:7101 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:7103 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:8001 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3201 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:6670 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN
Another option is a little more complicated: you can use the dropbearmulti binary available in this github repository to connect to a SSH server in your raspberry PI. Using the dropbear client (dbclient), open a SSH tunnel mapping the remote port on you raspberry, let's say, 64554, to the local 554 port. To avoid being asked for credentials, you export the environment variable
DROPBEAR_PASSWORD
and dbclient will use it automagically!I do something very similar with the following code inside
debug_cmd.sh
. It has been working like a charm!# Custom Environment Variables. export DROPBEAR_PASSWORD=<password> # Enable SSH Tunnel. while true do sleep 60 # Wait 60 secs and repeat every minute. # Check whether dbclient is running. if ! ps | grep "dropbearmulti\sdbclient" >/dev/null then /mnt/mmc01/0/bin/dropbearmulti dbclient -N -f -y -g -R 64554:localhost:554 <user>@<server_ip_or_dns>/<ssh_port> fi done &
I actually use it to get past a NAT444 that my ISP has deployed on 4G networks. My first option was using a VPN (like WireGuard), but I couldn't find a client already compiled for this architecture (ARMv6), unfortunately.
hi, I too tinkered with my private IP 4g connection in order to access my local network.. ended up by using raspberry creating a reverse-ssh-tunnel along with another raspberry on a network with public IP..
anyway at this time I ended up with a public IP 4g connection so i would avoid using raspberry so for this reason i excluded dropbear trick (already thinked about it..) as raspberry often get stuck so not very reliable for continuative remote access. Another option is to acquire stream and transcode to a different port, also adding security login.
I will try 8001 port thing, seems an easy one.. even if i'd have to set a password (cameras provide passwordless access.. not ideal for remote public access)
however if anyone got how to modify p2pcam setting it would be great!
Hi, i've 2 of these cameras and i would control them remotely. unfortunately my router can't map internal/external ports with different port number so I need to change default RTSP port (554) to a different one. is this possible?
otherwise a workaround could be to transcode stream with a local raspberry and send it to a different socket. however in this case i'd lost streams if raspberry freezes.
thank you in advance.