search

ant-thomas / zsgx1hacks

Hacks for ZS-GX1 IP Camera and various Goke GK7102 based IP Cameras
365 stars 102 forks source link

Works on ZS-GX1 but sharp whistling #38

Open scassarGitHub opened 6 years ago

scassarGitHub commented 6 years ago

Hi,

Thanks for the hacks. That saves me money.

Works very well on 2 ZS-GX1 with latest firmware but I heard a sharp whistling on the 2 devices when booted on SDCard and not on the original firmware.

Could you help me ?

deorder commented 6 years ago

If you get the sharp whistling it means the 'goke_volume' binary is not run correctly.

ttanel commented 6 years ago

On mine faint whistling is there even if I set volume to 0 via goke_volume. I just disconnected the speaker from motherboard and now it's completely silent.

scassarGitHub commented 6 years ago

Oh really ! Was it difficult to disconnect ? Do you need to break some solders or were there connectors to disconnect ?

ttanel commented 6 years ago

Nope, it's very easy and reversible, both mic and speaker have connectors on main board.

scassarGitHub commented 6 years ago

Thank you very much, I will try this WE.

ant-thomas commented 6 years ago

The whistling is often still there, just quieter. I've also disconnected the speaker because it serves no purpose for me.

Disconnect the attached cable speaker

reglisse69 commented 6 years ago

Thanks a lot for all your help.

Finally v0.3 (seems) to make the noise disapeared for me (tried quickly this morning).

reglisse69 commented 6 years ago

Ok in fact sound is always there but almost inaudible for some people and depending on the noises in the house.

I will try to do the hardware method.

dst0815 commented 6 years ago

GD-SC03 went silence using 'goke_volume -s 255' without disconnecting the speaker