Help my camera! :)

[kkm0614]

Hey guys!

I ordered a Gearbest camera: ZS - GX1 1080P WiFi IP Camera Webcam. This can only be used with eyepluspilot.com or by phone. I would like to use it as described, but I do not have the knowledge to install it. Please make a "how-made" video for users, which everyone uses for their own responsibility. I tried Telnet, but I do not know the password. Features: Camera Version Firmware: 3.1.1.0908 Embedded Application: 3.1.1.0908 Device ID: ** MAC Address: ** Model Type: CloudCamera Anti Flicker: 60Hz

I'm sorry about English, I'm writing about Hungary.

All my respect, Mark!

[kkm0614]

Hello!

It works : rtsp://admin:admin@:8001/onvif1

[diekaines]

What firmware version is your camera?

On Nov 17, 2017 5:54 PM, "kkm0614" notifications@github.com wrote:

Hello!

It works : rtsp://admin:admin@:8001/onvif1

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ant-thomas/zsgx1hacks/issues/6#issuecomment-345299692, or mute the thread https://github.com/notifications/unsubscribe-auth/ACYEHTNlLNjVUakR7l8yAEBpHw_fToPRks5s3bougaJpZM4QiTF2 .

[kkm0614]

ZS - GX1 1080P Firmware: 3.1.1.0908

[diekaines]

Can you confirm it works without internet from your modem?

On Nov 17, 2017 6:03 PM, "kkm0614" notifications@github.com wrote:

ZS - GX1 1080P Firmware: 3.1.1.0908

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ant-thomas/zsgx1hacks/issues/6#issuecomment-345302570, or mute the thread https://github.com/notifications/unsubscribe-auth/ACYEHeQduOu_1GyJYRJ0xRaltDnHYkhCks5s3bxwgaJpZM4QiTF2 .

[kkm0614]

Network can be used without the use of the internet. (No internet=Network it works) :D

[kkm0614]

the ispy program can not use the camera. it would be nice if PTZ were to go too.

[diekaines]

Great, dont update the firmware. I heard that the new version doesn't has access

Regards

On Nov 17, 2017 6:12 PM, "kkm0614" notifications@github.com wrote:

the ispy program can not use the camera. it would be nice if PTZ were to go too.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ant-thomas/zsgx1hacks/issues/6#issuecomment-345305047, or mute the thread https://github.com/notifications/unsubscribe-auth/ACYEHasJ__KNnCir3M4vIrtFeVyzLRAMks5s3b6LgaJpZM4QiTF2 .

[sanscorp1]

Rtsp / onvif 1.2 are enabled by default on the mentioned firmware. Onvif device manager (sourceforge) can access the livestream and ptz.

Today I recieved a usb to ttl interface, I'm going to rip the filesystem from a tenvis camera with embedded web interface.

I also replied under the initial readme here, but didn't know if it was the right place. I have no experience with hacking or linux, just trying stuff.

[kkm0614]

Ispy opensource program work. The ptz option is still in question.

[ant-thomas]

I can confirm that PTZ does work via onvif!

I tried it using the tinyCam Free app on Android

[ant-thomas]

Updated instructions