Open anthonycmain opened 8 months ago
FYI Not all of that commands are working with the Kodak Cherish cam, because the app is also a native app for more than one vendor. Saw thinks like a doorbell.
Second, the constants are not uses in the code everything, they are often hardcoded.
CAMERA_SETUP_START_LOG_CMD | get_log; CHECK_PU_FW_UPGRADE_CMD | check_pu_fw_upgrade; CLEAR_REPEATER_INFO_CMD | clear_repeater_info; DNS_CONFIG_CMD | dns_config; FORCE_FW_UPGRADE_CMD | check_fw_upgrade; GET_ALL_PTZ_PRESET_CMD | get_all_pos; GET_ALL_VERSIONS_CMD | get_all_versions; GET_BITRATE_OPTION_CMD | get_bitratelimitopt; GET_CALL_WAIT_DURATION_CMD | get_callwait; GET_CAM_INFO_CMD | get_caminfo; GET_CAMERA_LOG_CMD | get_codelog; GET_DEV_INFO_CMD | get_dev_info; GET_FLICKER_CMD | get_flicker; GET_FLIPUP_CMD | value_flipup; GET_MELODY_CMD | value_melody; GET_MELODY_VOLUME_CMD | melody_vol; GET_MOTION_SENSITIVE_CMD | value_motion_sensitivity; GET_MOTION_SOURCE_CMD | get_motion_source; GET_NIGHT_VISION_CMD | get_night_vision; GET_PANEL_STATUS_CMD | get_panel_status; GET_REPEATER_STATUS_CMD | get_repeater_status; GET_RT_LIST_CMD | get_rt_list; GET_SETUP_LOG_CMD | get_setup_log; GET_SPEAKER_VOLUME_CMD | get_spkmic_volume; GET_TEMPERATURE_AND_HUMIDITY_CMD | get_temp_humid; GET_TIMER_INFO_CMD | cinatic_timer; GET_UDID_CMD | get_udid; GET_VERSION_CMD | get_version; GET_VIDEO_BITRATE_CMD | get_video_bitrate; GET_VIDEO_BITRATE_DOORBELL_CMD | get_bitrate; GET_VIDEO_FRAME_RATE_CMD | get_framerate; GET_VIDEO_GOP_CMD | get_gop; GET_VIDEO_RESOLUTION_CMD | get_resolution; GET_WIFI_STRENGTH_CMD | get_wifi_strength; GET_ZONE_DETECTION_CMD | get_zone_detection; HOME_MODE_CMD | homemode_advise_setting; LOCAL_FW_UPGRADE_CMD | local_fw_upgrade; MELODY_CMD | melody%d; MELODY_STOP_CMD | melodystop; MELODY1_CMD | melody1; MELODY2_CMD | melody2; MELODY3_CMD | melody3; MELODY4_CMD | melody4; MELODY5_CMD | melody5; PAIR_STOP_CMD | pair_stop; PICTURE_MODE_CMD | set_isp_idx; PLAY_VOICE_PROMPT_CMD | play_prompt; REMOVE_PTZ_PRESET_CMD | remove_pos; RESTART_SYSTEM_CMD | restart_system; SET_AQI_AP_CMD | set_aqi_detection; SET_AQI_CMD | set_aqi_detection; SET_BITRATE_OPTION_CMD | set_bitratelimitopt; SET_BLUE_LED_CMD | set_blue_led; SET_CALL_WAIT_DURATION_CMD | set_callwait; SET_CITY_TIMEZONE_CMD | set_city_timezone; SET_FAN_MODE_CMD | fan_mode_ctrl; SET_FLICKER_CMD | set_flicker; SET_FLIPUP_CMD | set_flipup; SET_HIGH_AQI_THRESH_CMD | set_aqi_hi_threshold; SET_HIGH_HUMIDITY_THRESH_CMD | set_humid_hi_threshold; SET_HIGH_TEMPERATURE_AP_THRESH_CMD | set_temp_hi_threshold; SET_HIGH_TEMPERATURE_THRESH_CMD | set_temp_hi_threshold; SET_HUMIDITY_AP_CMD | set_humid_detection; SET_HUMIDITY_CMD | set_humid_detection; SET_LOW_AQI_THRESH_CMD | set_aqi_lo_threshold; SET_LOW_HUMIDITY_THRESH_CMD | set_humid_lo_threshold; SET_LOW_TEMPERATURE_AP_THRESH_CMD | set_temp_lo_threshold; SET_LOW_TEMPERATURE_THRESH_CMD | set_temp_lo_threshold; SET_MELODY_VOLUME_CMD | melody_vol; SET_MOTION_SENSITIVE_CMD | set_motion_sensitivity; SET_MOTION_SNAP_STORAGE_CMD | set_motion_snapshot_storage; SET_MOTION_SOURCE_CMD | set_motion_source; SET_MOTION_STORAGE_CMD | set_motion_storage; SET_NETWORK_INFO_CMD | set_nwk_info; SET_NETWORK_INFO_UTF8_CMD | set_nwk_info_v2; SET_NIGHT_VISION_CMD | set_night_vision; SET_POWER_CMD | power_state_set; SET_PTZ_PRESET_CMD | set_pos; SET_REG_TOKEN_CMD | set_reg_token; SET_REPEATER_INFO_CMD | set_repeater_info; SET_SCHEDULE_CMD | cinatic_scheduler; SET_SDCARD_AUTO_REMOVE_CMD | auto_rm_clip; SET_SEC_TYPE_CMD | set_sec_type; SET_SERVER_AUTH_CMD | set_server_auth; SET_SLEEP_MODE_CMD | sleep_mode; SET_SOUND_DETECTION_CMD | set_sound_detection; SET_SPEAKER_VOLUME_CMD | set_spkmic_volume; SET_TEMPERATURE_AP_CMD | set_temp_detection; SET_TEMPERATURE_CMD | set_temp_detection; SET_URL_CMD | set_url; SET_VIDEO_BITRATE_CMD | set_video_bitrate; SET_VIDEO_BITRATE_DOORBELL_CMD | set_bitrate; SET_VIDEO_FRAME_RATE_CMD | set_framerate; SET_VIDEO_GOP_CMD | set_gop; SET_VIDEO_RESOLUTION_CMD | set_resolution; SET_ZONE_DETECTION_CMD | set_zone_detection; SETUP_WIRELESS_SAVE_CMD | setup_wireless_save; START_ALL_PTZ_PRESET_CMD | set_moving_path; START_PTZ_CALIBRATION_CMD | motor_calibration; START_PTZ_PRESET_CMD | go_pos; TUNING_LEVEL_CMD | agc_lvl; UPDATE_WIFI_INFO_CMD | change_router_info; URL_SET_CMD | url_set;