Closed RahimFatih closed 3 years ago
I wanted to run hifive-unleashed.resc script (renode/scripts/single-node/hifive_unleashed.resc), after successful boot of Linux, I was asked for login and password for Buildroot, but I couldn't find any information about login data.
hifive-unleashed.resc
renode/scripts/single-node/hifive_unleashed.resc
Buildroot
Here is my terminal output of the whole session:
bbl loader SIFIVE, INC. 5555555555555555555555555 5555 5555 5555 5555 5555 5555 5555 5555555555555555555555 5555 555555555555555555555555 5555 5555 5555 5555 5555 5555 5555555555555555555555555555 55555 55555 555555555 55555 55555 55555 55555 55555 5 55555 55555 55555 55555 55555 55555 55555 55555 55555 55555 55555 555555555 55555 5 SiFive RISC-V Coreplex [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] Linux version 4.15.0-00044-g2b0aa1de45f6 (houen@bakura) (gcc version 7.2.0 (GCC)) #5 SMP Wed Jul 11 14:54:22 CEST 2018 [ 0.000000] bootconsole [early0] enabled [ 0.000000] Initial ramdisk at: 0x (ptrval) (9593856 bytes) [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] Normal [mem 0x0000000090000000-0x000008ffffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] software IO TLB [mem 0x8bc73000-0x8fc73000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 0.000000] CPU with hartid=0 has a non-okay status of "masked" [ 0.000000] elf_hwcap is 0x1105 [ 0.000000] percpu: Embedded 14 pages/cpu @ (ptrval) s28632 r0 d28712 u57 344 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64135 [ 0.000000] Kernel command line: earlyconsole mem=256M@0x80000000 [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 175124K/260096K available (3193K kernel code, 263K rwdata, 9 70K rodata, 9535K init, 782K bss, 84972K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=5, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=5. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=5 [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 [ 0.000000] CPU with hartid=0 has a non-okay status of "masked" [ 0.000000] riscv,cpu_intc,1: 64 local interrupts mapped [ 0.000000] riscv,cpu_intc,2: 64 local interrupts mapped [ 0.000000] riscv,cpu_intc,3: 64 local interrupts mapped [ 0.000000] riscv,cpu_intc,4: 64 local interrupts mapped [ 0.000000] OF: /soc/interrupt-controller@c000000: could not find phandle [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 2 PID: 0 at /home/houen/antmicro/microsemi/mfus2/linux /drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 [ 0.000000] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-00044-g2b0aa1de45f6 #5 [ 0.000000] Call Trace: [ 0.000000] [< (ptrval)>] walk_stackframe+0x0/0xa2 [ 0.000000] [< (ptrval)>] show_stack+0x26/0x34 [ 0.000000] [< (ptrval)>] dump_stack+0x5e/0x7c [ 0.000000] [< (ptrval)>] __warn+0xc6/0xdc [ 0.000000] [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [ 0.000000] [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [ 0.000000] [< (ptrval)>] irq_enable+0x3a/0x6a [ 0.000000] [< (ptrval)>] __irq_startup+0x80/0x88 [ 0.000000] [< (ptrval)>] irq_startup+0x4e/0xe2 [ 0.000000] [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [ 0.000000] [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [ 0.000000] [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [ 0.000000] [< (ptrval)>] plic_init+0x1fe/0x32a [ 0.000000] [< (ptrval)>] of_irq_init+0x182/0x2a6 [ 0.000000] [< (ptrval)>] irqchip_init+0x10/0x1c [ 0.000000] [< (ptrval)>] init_IRQ+0x8/0x14 [ 0.000000] [< (ptrval)>] start_kernel+0x20a/0x350 [ 0.000000] [< (ptrval)>] _sinittext+0x4e/0x56 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 [ 0.000000] ---[ end trace b065de4394c98b2c ]--- [ 0.000000] riscv,plic0,c000000: mapped 53 interrupts to 4/9 handlers [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.000034] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199 023255500ns [ 0.000547] Calibrating delay loop (skipped), value calculated using timer frequ ency.. 2.00 BogoMIPS (lpj=10000) [ 0.000781] pid_max: default: 32768 minimum: 301 [ 0.001513] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.001679] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.005709] Hierarchical SRCU implementation. [ 0.013938] smp: Bringing up secondary CPUs ... [ 0.015272] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.015514] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199 023255500ns [ 0.017919] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.018161] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199 023255500ns [ 0.020543] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.020783] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199 023255500ns [ 0.021583] smp: Brought up 1 node, 4 CPUs [ 0.024083] devtmpfs: initialized [ 0.038583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 19112604462750000 ns [ 0.038883] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041015] NET: Registered protocol family 16 [ 0.044483] sifive-u54-prci 10000000.prci: Registered U54 core clocks [ 0.045671] sifive-gemgxl-mgmt 100a0000.cadence-gemgxl-mgmt: Registered clock sw itch 'cadence-gemgxl-mgmt' [ 0.089883] vgaarb: loaded [ 0.091283] SCSI subsystem initialized [ 0.092683] usbcore: registered new interface driver usbfs [ 0.092983] usbcore: registered new interface driver hub [ 0.093283] usbcore: registered new device driver usb [ 0.093683] pps_core: LinuxPPS API ver. 1 registered [ 0.093783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.094083] PTP clock support registered [ 0.096983] clocksource: Switched to clocksource riscv_clocksource [ 0.101383] NET: Registered protocol family 2 [ 0.104183] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.104683] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.105083] TCP: Hash tables configured (established 2048 bind 2048) [ 0.105483] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.105683] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.106483] NET: Registered protocol family 1 [ 0.340783] Unpacking initramfs... [ 0.614883] Initialise system trusted keyrings [ 0.615383] workingset: timestamp_bits=62 max_order=16 bucket_order=0 [ 0.647683] random: fast init done [ 0.654283] jitterentropy: Initialization failed with host not compliant with re quirements: 2 [ 0.654483] Key type asymmetric registered [ 0.654583] Asymmetric key parser 'x509' registered [ 0.654683] io scheduler noop registered [ 0.655883] io scheduler cfq registered (default) [ 0.655983] io scheduler mq-deadline registered [ 0.656083] io scheduler kyber registered [ 0.660983] sifive_gpio 10060000.gpio: SiFive GPIO chip registered 16 GPIOs [ 0.661883] pwm-sifivem 10020000.pwm: Unable to find controller clock [ 0.662183] pwm-sifivem 10021000.pwm: Unable to find controller clock [ 0.837383] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.842883] 10010000.serial: ttySI0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a sifive-serial [ 0.844083] 10011000.serial: ttySI1 at MMIO 0x10011000 (irq = 5, base_baud = 0) is a sifive-serial [ 0.844283] console [ttySI0] enabled [ 0.844283] console [ttySI0] enabled [ 0.844383] bootconsole [early0] disabled [ 0.844383] bootconsole [early0] disabled [ 0.851483] sifive_spi 10041000.spi: mapped; irq=37, cs=4 [ 0.852883] sifive_spi 10040000.spi: mapped; irq=41, cs=1 [ 0.854283] sifive_spi 10050000.spi: mapped; irq=42, cs=1 [ 0.855983] libphy: Fixed MDIO Bus: probed [ 0.857683] macb: GEM doesn't support hardware ptp. [ 0.858183] libphy: MACB_mii_bus: probed [ 0.860483] Generic PHY 10090000.ethernet-ffffffff:00: attached PHY driver [Gene ric PHY] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) [ 0.860583] macb 10090000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1009000 0 irq 21 (70:b3:d5:92:f0:4a) [ 0.861883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.861983] ehci-pci: EHCI PCI platform driver [ 0.862483] usbcore: registered new interface driver usb-storage [ 0.862583] i2c /dev entries driver [ 0.865883] leds_pwm soc:pwmleds: unable to request PWM for mtd: -517 [ 0.866483] usbcore: registered new interface driver usbhid [ 0.866639] usbhid: USB HID core driver [ 0.868583] NET: Registered protocol family 17 [ 0.870083] Loading compiled-in X.509 certificates [ 0.872083] pwm-sifivem 10020000.pwm: SiFive PWM chip registered 4 PWMs [ 0.872683] pwm-sifivem 10021000.pwm: SiFive PWM chip registered 4 PWMs [ 0.899083] Freeing unused kernel memory: 9532K [ 0.899183] This architecture does not have kernel memory protection. Starting logging: OK Starting mdev... sort: /sys/devices/platform/Fixed: No such file or directory modprobe: can't change directory to '/lib/modules': No such file or directory Initializing random number generator... done. Starting network... Starting dropbear sshd: OK Welcome to Buildroot buildroot login: admin Password: Login incorrect
Try root/root. It's a common pattern for embedded Linux (and root is almost always the superuser)
I've tried it at beginning, but i had to make typo... Thank you, it works now with root/root.
I wanted to run
hifive-unleashed.resc
script (renode/scripts/single-node/hifive_unleashed.resc
), after successful boot of Linux, I was asked for login and password forBuildroot
, but I couldn't find any information about login data.Here is my terminal output of the whole session: