Closed zl03jsj closed 2 years ago
antoinemadec
commented
2 years ago @zl03jsj there is a template for bug reports for a reason.
Please provide the minimal vimrc and steps to reproduce. This ticket will be closed in a week from now otherwise. Thanks.
zl03jsj
commented
2 years ago @zl03jsj there is a template for bug reports for a reason.
Please provide the minimal vimrc and steps to reproduce. This ticket will be closed in a week from now otherwise. Thanks.
there are 2 config file:.vimrc
" Modeline and Notes {
" vim: set sw=4 ts=4 sts=4 et tw=78 foldmarker={,} foldlevel=0 foldmethod=marker spell:
"
" __ _ _____ _
" ___ _ __ / _/ |___ / __ __(_)_ __ ___
" / __| '_ \| |_| | |_ \ _____\ \ / /| | '_ ` _ \
" \__ \ |_) | _| |___) |_____|\ V / | | | | | | |
" |___/ .__/|_| |_|____/ \_/ |_|_| |_| |_|
" |_|
"
" This is the personal .vimrc file of Steve Francia.
" While much of it is beneficial for general use, I would
" recommend picking out the parts you want and understand.
"
" You can find me at http://spf13.com
"
" Copyright 2014 Steve Francia
"
" Licensed under the Apache License, Version 2.0 (the "License");
" you may not use this file except in compliance with the License.
" You may obtain a copy of the License at
"
" http://www.apache.org/licenses/LICENSE-2.0
"
" Unless required by applicable law or agreed to in writing, software
" distributed under the License is distributed on an "AS IS" BASIS,
" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
" See the License for the specific language governing permissions and
" limitations under the License.
" }
" Environment {
" Identify platform {
silent function! OSX()
return has('macunix')
endfunction
silent function! LINUX()
return has('unix') && !has('macunix') && !has('win32unix')
endfunction
silent function! WINDOWS()
return (has('win32') || has('win64'))
endfunction
" }
" Basics {
set nocompatible " Must be first line
if !WINDOWS()
set shell=/bin/sh
endif
" }
" Windows Compatible {
" On Windows, also use '.vim' instead of 'vimfiles'; this makes synchronization
" across (heterogeneous) systems easier.
if WINDOWS()
set runtimepath=$HOME/.vim,$VIM/vimfiles,$VIMRUNTIME,$VIM/vimfiles/after,$HOME/.vim/after
endif
" }
" Arrow Key Fix {
" https://github.com/spf13/spf13-vim/issues/780
if &term[:4] == "xterm" || &term[:5] == 'screen' || &term[:3] == 'rxvt'
inoremap <silent> <C-[>OC <RIGHT>
endif
" }
" }
" Use before config if available {
if filereadable(expand("~/.vimrc.before"))
source ~/.vimrc.before
endif
" }
" Use bundles config {
if filereadable(expand("~/.vimrc.bundles"))
source ~/.vimrc.bundles
endif
" }
" General {
function! ToggleBG()
let s:tbg = &background
" Inversion
if s:tbg == "dark"
set background=dark
else
set background=light
endif
endfunction
noremap <leader>bg :call ToggleBG()<CR>
" if !has('gui')
"set term=$TERM " Make arrow and other keys work
" endif
filetype plugin indent on " Automatically detect file types.
syntax on " Syntax highlighting
set mouse=a " Automatically enable mouse usage
set mousehide " Hide the mouse cursor while typing
scriptencoding utf-8
if has('clipboard')
if has('unnamedplus') " When possible use + register for copy-paste
set clipboard=unnamed,unnamedplus
else " On mac and Windows, use * register for copy-paste
set clipboard=unnamed
endif
endif
" Most prefer to automatically switch to the current file directory when
" a new buffer is opened; to prevent this behavior, add the following to
" your .vimrc.before.local file:
" let g:spf13_no_autochdir = 1
if !exists('g:spf13_no_autochdir')
autocmd BufEnter * if bufname("") !~ "^\[A-Za-z0-9\]*://" | lcd %:p:h | endif
" Always switch to the current file directory
endif
"set autowrite " Automatically write a file when leaving a modified buffer
set shortmess+=filmnrxoOtT " Abbrev. of messages (avoids 'hit enter')
set viewoptions=folds,options,cursor,unix,slash " Better Unix / Windows compatibility
set virtualedit=onemore " Allow for cursor beyond last character
set history=1000 " Store a ton of history (default is 20)
set nospell " Spell checking on
set hidden " Allow buffer switching without saving
set iskeyword-=. " '.' is an end of word designator
set iskeyword-=# " '#' is an end of word designator
set iskeyword-=- " '-' is an end of word designator
" Instead of reverting the cursor to the last position in the buffer, we
" set it to the first line when editing a git commit message
au FileType gitcommit au! BufEnter COMMIT_EDITMSG call setpos('.', [0, 1, 1, 0])
" http://vim.wikia.com/wiki/Restore_cursor_to_file_position_in_previous_editing_session
" Restore cursor to file position in previous editing session
" To disable this, add the following to your .vimrc.before.local file:
" let g:spf13_no_restore_cursor = 1
if !exists('g:spf13_no_restore_cursor')
function! ResCur()
if line("'\"") <= line("$")
silent! normal! g`"
return 1
endif
endfunction
augroup resCur
autocmd!
autocmd BufWinEnter * call ResCur()
augroup END
endif
" Setting up the directories {
set backup " Backups are nice ...
if has('persistent_undo')
set undofile " So is persistent undo ...
set undolevels=1000 " Maximum number of changes that can be undone
set undoreload=10000 " Maximum number lines to save for undo on a buffer reload
endif
" To disable views add the following to your .vimrc.before.local file:
" let g:spf13_no_views = 1
if !exists('g:spf13_no_views')
" Add exclusions to mkview and loadview
" eg: *.*, svn-commit.tmp
let g:skipview_files = [
\ '\[example pattern\]'
\ ]
endif
" }
" }
" Vim UI {
if isdirectory(expand("~/.vim/bundle/nvim"))
let g:catppuccin_flavour = "latte" " latte, frappe, macchiato, mocha
lua << EOF
require("catppuccin").setup()
EOF
color catppuccin
elseif !exists('g:override_spf13_bundles') && filereadable(expand("~/.vim/bundle/vim-colors-solarized/colors/solarized.vim"))
let g:solarized_termcolors=256
let g:solarized_termtrans=1
let g:solarized_contrast="normal"
let g:solarized_visibility="normal"
color solarized " Load a colorscheme
elseif !exists('g:override_spf13_bundles') && isdirectory(expand("~/.vim/bundle/vim-one"))
color one
endif
set tabpagemax=15 " Only show 15 tabs
set showmode " Display the current mode
set cursorline " Highlight current line
highlight clear SignColumn " SignColumn should match background
highlight clear LineNr " Current line number row will have same background color in relative mode
"highlight clear CursorLineNr " Remove highlight color from current line number
if has('cmdline_info')
set ruler " Show the ruler
set rulerformat=%30(%=\:b%n%y%m%r%w\ %l,%c%V\ %P%) " A ruler on steroids
set showcmd " Show partial commands in status line and
" Selected characters/lines in visual mode
endif
if has('statusline')
set laststatus=2
" Broken down into easily includeable segments
set statusline=%<%f\ " Filename
set statusline+=%w%h%m%r " Options
if !exists('g:override_spf13_bundles') && exists('g:loaded_fugitive')
"set statusline+=%{exists('g:loaded_fugitive')?fugitive#statusline():''}
set statusline+=%{fugitive#statusline()} " Git Hotness
endif
set statusline+=\ [%{&ff}/%Y] " Filetype
set statusline+=\ [%{getcwd()}] " Current dir
set statusline+=%=%-14.(%l,%c%V%)\ %p%% " Right aligned file nav info
endif
set backspace=indent,eol,start " Backspace for dummies
set linespace=0 " No extra spaces between rows
"set number " Line numbers on
set relativenumber
set number
set showmatch " Show matching brackets/parenthesis
set incsearch " Find as you type search
set hlsearch " Highlight search terms
set winminheight=0 " Windows can be 0 line high
set ignorecase " Case insensitive search
set smartcase " Case sensitive when uc present
set wildmenu " Show list instead of just completing
set wildmode=list:longest,full " Command <Tab> completion, list matches, then longest common part, then all.
set whichwrap=b,s,h,l,<,>,[,] " Backspace and cursor keys wrap too
set scrolljump=5 " Lines to scroll when cursor leaves screen
set scrolloff=3 " Minimum lines to keep above and below cursor
set foldenable " Auto fold code
set list
set listchars=tab:›\ ,trail:•,extends:#,nbsp:. " Highlight problematic whitespace
" }
" Formatting {
set wrap " Do not wrap long lines
set autoindent " Indent at the same level of the previous line
set shiftwidth=4 " Use indents of 4 spaces
set expandtab " Tabs are spaces, not tabs
set tabstop=4 " An indentation every four columns
set softtabstop=4 " Let backspace delete indent
set nojoinspaces " Prevents inserting two spaces after punctuation on a join (J)
set splitright " Puts new vsplit windows to the right of the current
set splitbelow " Puts new split windows to the bottom of the current
"set matchpairs+=<:> " Match, to be used with %
set pastetoggle=<F12> " pastetoggle (sane indentation on pastes)
"set comments=sl:/*,mb:*,elx:*/ " auto format comment blocks
" Remove trailing whitespaces and ^M chars
" To disable the stripping of whitespace, add the following to your
" .vimrc.before.local file:
" let g:spf13_keep_trailing_whitespace = 1
autocmd FileType c,cpp,java,go,php,javascript,puppet,python,rust,twig,xml,yml,perl,sql autocmd BufWritePre <buffer> if !exists('g:spf13_keep_trailing_whitespace') | call StripTrailingWhitespace() | endif
"autocmd FileType go autocmd BufWritePre <buffer> Fmt
autocmd BufNewFile,BufRead *.html.twig set filetype=html.twig
autocmd FileType haskell,puppet,ruby,yml setlocal expandtab shiftwidth=2 softtabstop=2
" preceding line best in a plugin but here for now.
autocmd BufNewFile,BufRead *.coffee set filetype=coffee
" Workaround vim-commentary for Haskell
autocmd FileType haskell setlocal commentstring=--\ %s
" Workaround broken colour highlighting in Haskell
autocmd FileType haskell,rust setlocal nospell
" }
" Key (re)Mappings {
" The default leader is '\', but many people prefer ',' as it's in a standard
" location. To override this behavior and set it back to '\' (or any other
" character) add the following to your .vimrc.before.local file:
" let g:spf13_leader='\'
if !exists('g:spf13_leader')
let mapleader = ','
else
let mapleader=g:spf13_leader
endif
if !exists('g:spf13_localleader')
let maplocalleader = '_'
else
let maplocalleader=g:spf13_localleader
endif
" The default mappings for editing and applying the spf13 configuration
" are <leader>ev and <leader>sv respectively. Change them to your preference
" by adding the following to your .vimrc.before.local file:
" let g:spf13_edit_config_mapping='<leader>ec'
" let g:spf13_apply_config_mapping='<leader>sc'
if !exists('g:spf13_edit_config_mapping')
let s:spf13_edit_config_mapping = '<leader>ev'
else
let s:spf13_edit_config_mapping = g:spf13_edit_config_mapping
endif
if !exists('g:spf13_apply_config_mapping')
let s:spf13_apply_config_mapping = '<leader>sv'
else
let s:spf13_apply_config_mapping = g:spf13_apply_config_mapping
endif
" Easier moving in tabs and windows
" The lines conflict with the default digraph mapping of <C-K>
" If you prefer that functionality, add the following to your
" .vimrc.before.local file:
" let g:spf13_no_easyWindows = 1
if !exists('g:spf13_no_easyWindows')
map <C-J> <C-W>j<C-W>_
map <C-K> <C-W>k<C-W>_
map <C-L> <C-W>l<C-W>_
map <C-H> <C-W>h<C-W>_
endif
" Wrapped lines goes down/up to next row, rather than next line in file.
noremap j gj
noremap k gk
" End/Start of line motion keys act relative to row/wrap width in the
" presence of `:set wrap`, and relative to line for `:set nowrap`.
" Default vim behaviour is to act relative to text line in both cases
" If you prefer the default behaviour, add the following to your
" .vimrc.before.local file:
" let g:spf13_no_wrapRelMotion = 1
if !exists('g:spf13_no_wrapRelMotion')
" Same for 0, home, end, etc
function! WrapRelativeMotion(key, ...)
let vis_sel=""
if a:0
let vis_sel="gv"
endif
if &wrap
execute "normal!" vis_sel . "g" . a:key
else
execute "normal!" vis_sel . a:key
endif
endfunction
" Map g* keys in Normal, Operator-pending, and Visual+select
noremap $ :call WrapRelativeMotion("$")<CR>
noremap <End> :call WrapRelativeMotion("$")<CR>
noremap 0 :call WrapRelativeMotion("0")<CR>
noremap <Home> :call WrapRelativeMotion("0")<CR>
noremap ^ :call WrapRelativeMotion("^")<CR>
" Overwrite the operator pending $/<End> mappings from above
" to force inclusive motion with :execute normal!
onoremap $ v:call WrapRelativeMotion("$")<CR>
onoremap <End> v:call WrapRelativeMotion("$")<CR>
" Overwrite the Visual+select mode mappings from above
" to ensure the correct vis_sel flag is passed to function
vnoremap $ :<C-U>call WrapRelativeMotion("$", 1)<CR>
vnoremap <End> :<C-U>call WrapRelativeMotion("$", 1)<CR>
vnoremap 0 :<C-U>call WrapRelativeMotion("0", 1)<CR>
vnoremap <Home> :<C-U>call WrapRelativeMotion("0", 1)<CR>
vnoremap ^ :<C-U>call WrapRelativeMotion("^", 1)<CR>
endif
" The following two lines conflict with moving to top and
" bottom of the screen
" If you prefer that functionality, add the following to your
" .vimrc.before.local file:
" let g:spf13_no_fastTabs = 1
if !exists('g:spf13_no_fastTabs')
map <S-H> gT
map <S-L> gt
endif
" Stupid shift key fixes
if !exists('g:spf13_no_keyfixes')
if has("user_commands")
command! -bang -nargs=* -complete=file E e<bang> <args>
command! -bang -nargs=* -complete=file W w<bang> <args>
command! -bang -nargs=* -complete=file Wq wq<bang> <args>
command! -bang -nargs=* -complete=file WQ wq<bang> <args>
command! -bang Wa wa<bang>
command! -bang WA wa<bang>
command! -bang Q q<bang>
command! -bang QA qa<bang>
command! -bang Qa qa<bang>
endif
cmap Tabe tabe
endif
" Yank from the cursor to the end of the line, to be consistent with C and D.
nnoremap Y y$
" Code folding options
nmap <leader>f0 :set foldlevel=0<CR>
nmap <leader>f1 :set foldlevel=1<CR>
nmap <leader>f2 :set foldlevel=2<CR>
nmap <leader>f3 :set foldlevel=3<CR>
nmap <leader>f4 :set foldlevel=4<CR>
nmap <leader>f5 :set foldlevel=5<CR>
nmap <leader>f6 :set foldlevel=6<CR>
nmap <leader>f7 :set foldlevel=7<CR>
nmap <leader>f8 :set foldlevel=8<CR>
nmap <leader>f9 :set foldlevel=9<CR>
" Most prefer to toggle search highlighting rather than clear the current
" search results. To clear search highlighting rather than toggle it on
" and off, add the following to your .vimrc.before.local file:
" let g:spf13_clear_search_highlight = 1
if exists('g:spf13_clear_search_highlight')
nmap <silent> <leader>/ :nohlsearch<CR>
else
nmap <silent> <leader>/ :set invhlsearch<CR>
endif
" Find merge conflict markers
map <leader>fc /\v^[<\|=>]{7}( .*\|$)<CR>
" Shortcuts
" Change Working Directory to that of the current file
cmap cwd lcd %:p:h
cmap cd. lcd %:p:h
" Visual shifting (does not exit Visual mode)
vnoremap < <gv
vnoremap > >gv
" Allow using the repeat operator with a visual selection (!)
" http://stackoverflow.com/a/8064607/127816
vnoremap . :normal .<CR>
" For when you forget to sudo.. Really Write the file.
cmap w!! w !sudo tee % >/dev/null
" Some helpers to edit mode
" http://vimcasts.org/e/14
cnoremap %% <C-R>=fnameescape(expand('%:h')).'/'<cr>
map <leader>ew :e %%
map <leader>es :sp %%
map <leader>ev :vsp %%
map <leader>et :tabe %%
" Adjust viewports to the same size
map <Leader>= <C-w>=
" Map <Leader>ff to display all lines with keyword under cursor
" and ask which one to jump to
nmap <Leader>ff [I:let nr = input("Which one: ")<Bar>exe "normal " . nr ."[\t"<CR>
" Easier horizontal scrolling
map zl zL
map zh zH
" Easier formatting
nnoremap <silent> <leader>q gwip
" FIXME: Revert this f70be548
" fullscreen mode for GVIM and Terminal, need 'wmctrl' in you PATH
map <silent> <F11> :call system("wmctrl -ir " . v:windowid . " -b toggle,fullscreen")<CR>
" }
" Plugins {
" GoLang {
if count(g:spf13_bundle_groups, 'go')
let g:go_highlight_functions = 1
let g:go_highlight_methods = 1
let g:go_highlight_structs = 1
let g:go_highlight_operators = 1
let g:go_highlight_extra_types = 1
let g:go_highlight_build_constraints = 1
let g:go_doc_popup_window = 1
let g:go_def_mapping_enabled = 0
let g:go_doc_keywordprg_enabled = 0
" let g:go_fmt_command = "goimports" " 导致折叠状态无法保留, 所以使用'gopls'
let g:go_fmt_command = 'gopls'
let g:syntastic_go_checkers = ['golint', 'govet', 'errcheck']
endif
" }
" TextObj Sentence {
if count(g:spf13_bundle_groups, 'writing')
augroup textobj_sentence
autocmd!
autocmd FileType markdown call textobj#sentence#init()
autocmd FileType textile call textobj#sentence#init()
autocmd FileType text call textobj#sentence#init()
augroup END
endif
" }
" TextObj Quote {
if count(g:spf13_bundle_groups, 'writing')
augroup textobj_quote
autocmd!
autocmd FileType markdown call textobj#quote#init()
autocmd FileType textile call textobj#quote#init()
autocmd FileType text call textobj#quote#init({'educate': 0})
augroup END
endif
" }
" PIV {
if isdirectory(expand("~/.vim/bundle/PIV"))
let g:DisableAutoPHPFolding = 0
let g:PIVAutoClose = 0
endif
" }
" Misc {
if isdirectory(expand("~/.vim/bundle/nerdtree"))
let g:NERDShutUp=1
endif
if isdirectory(expand("~/.vim/bundle/matchit.zip"))
let b:match_ignorecase = 1
endif
" }
" OmniComplete {
" To disable omni complete, add the following to your .vimrc.before.local file:
" let g:spf13_no_omni_complete = 1
if !exists('g:spf13_no_omni_complete')
if has("autocmd") && exists("+omnifunc")
autocmd Filetype *
\if &omnifunc == "" |
\setlocal omnifunc=syntaxcomplete#Complete |
\endif
endif
hi Pmenu guifg=#000000 guibg=#F8F8F8 ctermfg=black ctermbg=Lightgray
hi PmenuSbar guifg=#8A95A7 guibg=#F8F8F8 gui=NONE ctermfg=darkcyan ctermbg=lightgray cterm=NONE
hi PmenuThumb guifg=#F8F8F8 guibg=#8A95A7 gui=NONE ctermfg=lightgray ctermbg=darkcyan cterm=NONE
" Some convenient mappings
"inoremap <expr> <Esc> pumvisible() ? "\<C-e>" : "\<Esc>"
if exists('g:spf13_map_cr_omni_complete')
inoremap <expr> <CR> pumvisible() ? "\<C-y>" : "\<CR>"
endif
inoremap <expr> <Down> pumvisible() ? "\<C-n>" : "\<Down>"
inoremap <expr> <Up> pumvisible() ? "\<C-p>" : "\<Up>"
inoremap <expr> <C-d> pumvisible() ? "\<PageDown>\<C-p>\<C-n>" : "\<C-d>"
inoremap <expr> <C-u> pumvisible() ? "\<PageUp>\<C-p>\<C-n>" : "\<C-u>"
" Automatically open and close the popup menu / preview window
au CursorMovedI,InsertLeave * if pumvisible() == 0|silent! pclose|endif
set completeopt=menu,preview,longest
endif
" }
" Ctags {
set tags=./tags;/,~/.vimtags
" Make tags placed in .git/tags file available in all levels of a repository
let gitroot = substitute(system('git rev-parse --show-toplevel'), '[\n\r]', '', 'g')
if gitroot != ''
let &tags = &tags . ',' . gitroot . '/.git/tags'
endif
" }
" AutoCloseTag {
" Make it so AutoCloseTag works for xml and xhtml files as well
au FileType xhtml,xml ru ftplugin/html/autoclosetag.vim
nmap <Leader>ac <Plug>ToggleAutoCloseMappings
" }
" SnipMate {
" Setting the author var
" If forking, please overwrite in your .vimrc.local file
let g:snips_author = 'Steve Francia <steve.francia@gmail.com>'
" }
" NerdTree {
if isdirectory(expand("~/.vim/bundle/nerdtree"))
map <C-e> <plug>NERDTreeTabsToggle<CR>
nmap <leader>nt :NERDTreeFind<CR>
let NERDTreeShowBookmarks=1
let NERDTreeIgnore=['\.py[cd]$', '\~$', '\.swo$', '\.swp$', '^\.git$', '^\.hg$', '^\.svn$', '\.bzr$']
let NERDTreeChDirMode=0
let NERDTreeQuitOnOpen=0
let NERDTreeMouseMode=2
let NERDTreeShowHidden=1
let NERDTreeKeepTreeInNewTab=1
let g:nerdtree_tabs_open_on_gui_startup=0
endif
" }
" NerdCommenter {
if isdirectory(expand("~/.vim/bundle/nerdcommenter"))
let g:NERDCreateDefaultMappings = 0
let g:NERDSpaceDelims = 1
map <leader>cc :call nerdcommenter#Comment(0, "toggle")<CR>
endif
" }
" Tabularize {
if isdirectory(expand("~/.vim/bundle/tabular"))
nmap <Leader>a& : Tabularize /&<CR>
vmap <Leader>a& : Tabularize /&<CR>
nmap <Leader>a= :Tabularize /^[^=]*\zs=<CR>
vmap <Leader>a= :Tabularize /^[^=]*\zs=<CR>
nmap <Leader>a=> :Tabularize /=><CR>
vmap <Leader>a=> :Tabularize /=><CR>
nmap <Leader>a: :Tabularize /:<CR>
vmap <Leader>a: :Tabularize /:<CR>
nmap <Leader>a:: :Tabularize /:\zs<CR>
vmap <Leader>a:: :Tabularize /:\zs<CR>
nmap <Leader>a, :Tabularize /,<CR>
vmap <Leader>a, :Tabularize /,<CR>
nmap <Leader>a,, :Tabularize /,\zs<CR>
vmap <Leader>a,, :Tabularize /,\zs<CR>
nmap <Leader>a<Bar> :Tabularize /<Bar><CR>
vmap <Leader>a<Bar> :Tabularize /<Bar><CR>
endif
" }
" Session List {
set sessionoptions=blank,buffers,curdir,folds,tabpages,winsize
if isdirectory(expand("~/.vim/bundle/sessionman.vim/"))
nmap <leader>sl :SessionList<CR>
nmap <leader>ss :SessionSave<CR>
nmap <leader>sc :SessionClose<CR>
endif
" }
" JSON {
nmap <leader>jt <Esc>:%!python -m json.tool<CR><Esc>:set filetype=json<CR>
let g:vim_json_syntax_conceal = 0
" }
" PyMode {
" Disable if python support not present
if !has('python') && !has('python3')
let g:pymode = 0
endif
if isdirectory(expand("~/.vim/bundle/python-mode"))
let g:pymode_lint_checkers = ['pyflakes']
let g:pymode_trim_whitespaces = 0
let g:pymode_options = 0
let g:pymode_rope = 0
endif
" }
" ctrlp {
if isdirectory(expand("~/.vim/bundle/ctrlp.vim/"))
let g:ctrlp_working_path_mode = 'ra'
nnoremap <silent> <D-t> :CtrlP<CR>
nnoremap <silent> <D-r> :CtrlPMRU<CR>
let g:ctrlp_custom_ignore = {
\ 'dir': '\.git$\|\.hg$\|\.svn$',
\ 'file': '\.exe$\|\.so$\|\.dll$\|\.pyc$' }
if executable('ag')
let s:ctrlp_fallback = 'ag %s --nocolor -l -g ""'
elseif executable('ack-grep')
let s:ctrlp_fallback = 'ack-grep %s --nocolor -f'
elseif executable('ack')
let s:ctrlp_fallback = 'ack %s --nocolor -f'
" On Windows use "dir" as fallback command.
elseif WINDOWS()
let s:ctrlp_fallback = 'dir %s /-n /b /s /a-d'
else
let s:ctrlp_fallback = 'find %s -type f'
endif
if exists("g:ctrlp_user_command")
unlet g:ctrlp_user_command
endif
let g:ctrlp_user_command = {
\ 'types': {
\ 1: ['.git', 'cd %s && git ls-files . --cached --exclude-standard --others'],
\ 2: ['.hg', 'hg --cwd %s locate -I .'],
\ },
\ 'fallback': s:ctrlp_fallback
\ }
if isdirectory(expand("~/.vim/bundle/ctrlp-funky/"))
" CtrlP extensions
let g:ctrlp_extensions = ['funky']
"funky
nnoremap <Leader>fu :CtrlPFunky<Cr>
endif
endif
"}
" TagBar {
if isdirectory(expand("~/.vim/bundle/tagbar/"))
nnoremap <silent> <leader><leader>t :TagbarToggle<CR>
endif
"}
" Rainbow {
if isdirectory(expand("~/.vim/bundle/rainbow/"))
let g:rainbow_active = 1 "0 if you want to enable it later via :RainbowToggle
endif
"}
" Fugitive {
if isdirectory(expand("~/.vim/bundle/vim-fugitive/"))
nnoremap <silent> <leader>gs :Gstatus<CR>
nnoremap <silent> <leader>gd :Gdiff<CR>
nnoremap <silent> <leader>gc :Gcommit<CR>
nnoremap <silent> <leader>gb :Gblame<CR>
nnoremap <silent> <leader>gl :Glog<CR>
nnoremap <silent> <leader>gp :Git push<CR>
nnoremap <silent> <leader>gr :Gread<CR>
nnoremap <silent> <leader>gw :Gwrite<CR>
nnoremap <silent> <leader>ge :Gedit<CR>
" Mnemonic _i_nteractive
nnoremap <silent> <leader>gi :Git add -p %<CR>
nnoremap <silent> <leader>gg :SignifyToggle<CR>
endif
"}
" YouCompleteMe {
if count(g:spf13_bundle_groups, 'youcompleteme')
let g:ycm_confirm_extra_conf=0
let g:acp_enableAtStartup=0
let g:ycm_add_preview_to_completeopt=0
let g:ycm_key_invoke_completion='<c-h>'
let g:ycm_seed_identifiers_with_syntax=1
nnoremap <leader>d :YcmCompleter GoToDefinitionElseDeclaration<CR>
nnoremap <leader>i :YcmCompleter GoToImplementation<cr>
nnoremap <leader>o :YcmCompleter GoToDocumentOutline<cr>
nnoremap <leader>rn :YcmCompleter RefactorRename
nnoremap <leader>rr :YcmCompleter GoToReferences<cr>
nmap <silent> <leader>s <Plug>(YCMFindSymbolInWorkspace)
let s:ycm_hover_popup = -1
nmap <silent> K <plug>(YCMHover)
" pupup docs by curorhold {
" let g:ycm_auto_hover = ''
" function s:Hover()
" let response = youcompleteme#GetCommandResponse( 'GetDoc' )
" if response == ''
" let response = 'There is nothing to display...'
" endif
" call popup_hide( s:ycm_hover_popup )
" let s:ycm_hover_popup = popup_atcursor( balloon_split( response ), {} )
" endfunction
" autocmd CursorHold * call s:Hover()
" nnoremap <silent> K :call <SID>Hover()<CR>
" }
" let g:ycm_key_list_select_completion = ['<C-n>', '<Down>']
" let g:ycm_key_list_previous_completion = ['<C-p>', '<Up>']
" enable completion from tags
" let g:ycm_collect_identifiers_from_tags_files = 1
" " remap Ultisnips for compatibility for YCM
" let g:UltiSnipsExpandTrigger = '<C-j>'
" let g:UltiSnipsJumpForwardTrigger = '<C-j>'
" let g:UltiSnipsJumpBackwardTrigger = '<C-k>'
" Enable omni completion.
autocmd FileType css setlocal omnifunc=csscomplete#CompleteCSS
autocmd FileType html,markdown setlocal omnifunc=htmlcomplete#CompleteTags
autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
autocmd FileType python setlocal omnifunc=pythoncomplete#Complete
autocmd FileType xml setlocal omnifunc=xmlcomplete#CompleteTags
autocmd FileType ruby setlocal omnifunc=rubycomplete#Complete
autocmd FileType haskell setlocal omnifunc=necoghc#omnifunc
" Haskell post write lint and check with ghcmod
" $ `cabal install ghcmod` if missing and ensure
" ~/.cabal/bin is in your $PATH.
if !executable("ghcmod")
autocmd BufWritePost *.hs GhcModCheckAndLintAsync
endif
" For snippet_complete marker.
if !exists("g:spf13_no_conceal")
if has('conceal')
set conceallevel=2 concealcursor=i
endif
endif
" Disable the neosnippet preview candidate window
" When enabled, there can be too much visual noise
" especially when splits are used.
set completeopt-=preview
endif
" }
" coc.nvim {
if count(g:spf13_bundle_groups, 'coc')
" let g:python3_host_prog='/usr/local/Cellar/python@3.9/3.9.14/'
" Highlight the symbol and its references when holding the cursor.
autocmd CursorHold * silent call CocActionAsync('highlight')
if has('nvim')
"" Recently vim can merge signcolumn and number column into one
set signcolumn=number
" Use <c-space> to trigger completion.
inoremap <silent><expr> <c-2> coc#refresh()
" Use tab for trigger completion with characters ahead and navigate.
" NOTE: There's always complete item selected by default, you may want to enable
" no select by `"suggest.noselect": true` in your configuration file.
" NOTE: Use command ':verbose imap <tab>' to make sure tab is not mapped by
" other plugin before putting this into your config.
inoremap <silent><expr> <TAB>
\ coc#pum#visible() ? coc#pum#next(1) :
\ CheckBackspace() ? "\<Tab>" :
\ coc#refresh()
inoremap <expr><S-TAB> coc#pum#visible() ? coc#pum#prev(1) : "\<C-h>"
inoremap <silent><expr> <down>
\ coc#pum#visible() ? coc#pum#next(1) :
\ CheckBackspace() ? "\<Tab>" :
\ coc#refresh()
inoremap <expr><up> coc#pum#visible() ? coc#pum#prev(1) : "\<C-h>"
" Make <CR> to accept selected completion item or notify coc.nvim to format
" <C-g>u breaks current undo, please make your own choice.
inoremap <silent><expr> <CR> coc#pum#visible() ? coc#pum#confirm()
\: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
else
inoremap <silent><expr> <c-@> coc#refresh()
" Use tab for trigger completion with characters ahead and navigate.
" NOTE: Use command ':verbose imap <tab>' to make sure tab is not mapped by
" other plugin before putting this into your config.
inoremap <silent><expr> <TAB>
\ pumvisible() ? "\<C-n>" :
\ CheckBackspace() ? "\<TAB>" :
\ coc#refresh()
inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
" Make <CR> auto-select the first completion item and notify coc.nvim to
" format on enter, <cr> could be remapped by other vim plugin
inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
\: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
endif
function! CheckBackspace() abort
let col = col('.') - 1
return !col || getline('.')[col - 1] =~# '\s'
endfunction
" Use `[g` and `]g` to navigate diagnostics
" Use `:CocDiagnostics` to get all diagnostics of current buffer in location list.
nmap <silent> [g <Plug>(coc-diagnostic-prev)
nmap <silent> ]g <Plug>(coc-diagnostic-next)
" GoTo code navigation.
nmap <silent> <leader>d <Plug>(coc-definition)
nmap <silent> <leader>y <Plug>(coc-type-definition)
nmap <silent> <leader>i <Plug>(coc-implementation)
nmap <silent> <leader>r <Plug>(coc-references)
nmap <silent> <leader>sd :sp<CR><Plug>(coc-definition)
nmap <silent> <leader>vd :vsp<CR><Plug>(coc-definition)
" nmap <silent> \gt :vsp<CR><Plug>(coc-definition)<C-W>T Symbol renaming.
nmap <leader>rn <Plug>(coc-rename)
" Formatting selected code.
xmap <leader>f <Plug>(coc-format-selected)
nmap <leader>f <Plug>(coc-format-selected)
" Applying codeAction to the selected region.
" Example: `<leader>aap` for current paragraph
xmap <leader>a <Plug>(coc-codeaction-selected)
nmap <leader>a <Plug>(coc-codeaction-selected)
" Use K to show documentation in preview window.
nnoremap <silent> K :call ShowDocumentation()<CR>
" Mappings for CoCList {
" Show all diagnostics.
nnoremap <silent><nowait> <leader>a :<C-u>CocFzfList diagnostics<cr>
" Manage extensions.
nnoremap <silent><nowait> <leader>e :<C-u>CocFzfList extensions<cr>
" Show commands.
nnoremap <silent><nowait> <leader>c :<C-u>CocFzfList commands<cr>
" Find symbol of current document.
nnoremap <silent><nowait> <leader>o :<C-u>CocFzfList outline<cr>
" Search workspace symbols.
nnoremap <silent><nowait> <leader>s :<C-u>CocFzfList symbols<cr>
" Resume latest coc list.
nnoremap <silent><nowait> <leader>p :<C-u>CocListResume<CR>
let $FZF_DEFAULT_OPTS .= ' --border --margin=0,2'
" nnoremap <silent><nowait> <leader>l :<C-u>CocFzfList location<CR>
" }
" Do default action for next item.
nnoremap <silent><nowait> <leader>j :<C-u>CocNext<CR>
" Do default action for previous item.
nnoremap <silent><nowait> <leader>k :<C-u>CocPrev<CR>
" Remap keys for applying codeAction to the current buffer.
nmap <leader>ac <Plug>(coc-codeaction)
" Apply AutoFix to problem on the current line.
nmap <leader>qf <Plug>(coc-fix-current)
" Run the Code Lens action on the current line.
nmap <leader>cl <Plug>(coc-codelens-action)
" Map function and class text objects
" NOTE: Requires 'textDocument.documentSymbol' support from the language server.
xmap if <Plug>(coc-funcobj-i)
omap if <Plug>(coc-funcobj-i)
xmap af <Plug>(coc-funcobj-a)
omap af <Plug>(coc-funcobj-a)
xmap ic <Plug>(coc-classobj-i)
omap ic <Plug>(coc-classobj-i)
xmap ac <Plug>(coc-classobj-a)
omap ac <Plug>(coc-classobj-a)
" Use CTRL-S for selections ranges.
" Requires 'textDocument/selectionRange' support of language server.
nmap <silent> <C-s> <Plug>(coc-range-select)
xmap <silent> <C-s> <Plug>(coc-range-select)
function! ShowDocumentation()
if CocAction('hasProvider', 'hover')
call CocActionAsync('doHover')
else
call feedkeys('K', 'in')
endif
endfunction
" Highlight the symbol and its references when holding the cursor.
" autocmd CursorHold * silent call CocActionAsync('highlight')
augroup mygroup
autocmd!
" Setup formatexpr specified filetype(s).
autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected')
" Update signature help on jump placeholder.
autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
augroup end
" Add `:Format` command to format current buffer.
command! -nargs=0 Format :call CocActionAsync('format')
" Add `:Fold` command to fold current buffer.
command! -nargs=? Fold :call CocAction('fold', <f-args>)
" Add `:OR` command for organize imports of the current buffer.
command! -nargs=0 OR :call CocActionAsync('runCommand', 'editor.action.organizeImport')
" Add (Neo)Vim's native statusline support.
" NOTE: Please see `:h coc-status` for integrations with external plugins that
" provide custom statusline: lightline.vim, vim-airline.
set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
endif
" }
" neocomplete {
if count(g:spf13_bundle_groups, 'neocomplete')
let g:acp_enableAtStartup = 0
let g:neocomplete#enable_at_startup = 1
let g:neocomplete#enable_smart_case = 1
let g:neocomplete#enable_auto_delimiter = 1
let g:neocomplete#max_list = 15
let g:neocomplete#force_overwrite_completefunc = 1
" Define dictionary.
let g:neocomplete#sources#dictionary#dictionaries = {
\ 'default' : '',
\ 'vimshell' : $HOME.'/.vimshell_hist',
\ 'scheme' : $HOME.'/.gosh_completions'
\ }
" Define keyword.
if !exists('g:neocomplete#keyword_patterns')
let g:neocomplete#keyword_patterns = {}
endif
let g:neocomplete#keyword_patterns['default'] = '\h\w*'
" Plugin key-mappings {
" These two lines conflict with the default digraph mapping of <C-K>
if !exists('g:spf13_no_neosnippet_expand')
imap <C-k> <Plug>(neosnippet_expand_or_jump)
smap <C-k> <Plug>(neosnippet_expand_or_jump)
endif
if exists('g:spf13_noninvasive_completion')
inoremap <CR> <CR>
" <ESC> takes you out of insert mode
inoremap <expr> <Esc> pumvisible() ? "\<C-y>\<Esc>" : "\<Esc>"
" <CR> accepts first, then sends the <CR>
inoremap <expr> <CR> pumvisible() ? "\<C-y>\<CR>" : "\<CR>"
" <Down> and <Up> cycle like <Tab> and <S-Tab>
inoremap <expr> <Down> pumvisible() ? "\<C-n>" : "\<Down>"
inoremap <expr> <Up> pumvisible() ? "\<C-p>" : "\<Up>"
" Jump up and down the list
inoremap <expr> <C-d> pumvisible() ? "\<PageDown>\<C-p>\<C-n>" : "\<C-d>"
inoremap <expr> <C-u> pumvisible() ? "\<PageUp>\<C-p>\<C-n>" : "\<C-u>"
else
" <C-k> Complete Snippet
" <C-k> Jump to next snippet point
imap <silent><expr><C-k> neosnippet#expandable() ?
\ "\<Plug>(neosnippet_expand_or_jump)" : (pumvisible() ?
\ "\<C-e>" : "\<Plug>(neosnippet_expand_or_jump)")
smap <TAB> <Right><Plug>(neosnippet_jump_or_expand)
inoremap <expr><C-g> neocomplete#undo_completion()
inoremap <expr><C-l> neocomplete#complete_common_string()
"inoremap <expr><CR> neocomplete#complete_common_string()
" <CR>: close popup
" <s-CR>: close popup and save indent.
inoremap <expr><s-CR> pumvisible() ? neocomplete#smart_close_popup()."\<CR>" : "\<CR>"
function! CleverCr()
if pumvisible()
if neosnippet#expandable()
let exp = "\<Plug>(neosnippet_expand)"
return exp . neocomplete#smart_close_popup()
else
return neocomplete#smart_close_popup()
endif
else
return "\<CR>"
endif
endfunction
" <CR> close popup and save indent or expand snippet
imap <expr> <CR> CleverCr()
" <C-h>, <BS>: close popup and delete backword char.
inoremap <expr><BS> neocomplete#smart_close_popup()."\<C-h>"
inoremap <expr><C-y> neocomplete#smart_close_popup()
endif
" <TAB>: completion.
inoremap <expr><TAB> pumvisible() ? "\<C-n>" : "\<TAB>"
inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<TAB>"
" Courtesy of Matteo Cavalleri
function! CleverTab()
if pumvisible()
return "\<C-n>"
endif
let substr = strpart(getline('.'), 0, col('.') - 1)
let substr = matchstr(substr, '[^ \t]*$')
if strlen(substr) == 0
" nothing to match on empty string
return "\<Tab>"
else
" existing text matching
if neosnippet#expandable_or_jumpable()
return "\<Plug>(neosnippet_expand_or_jump)"
else
return neocomplete#start_manual_complete()
endif
endif
endfunction
imap <expr> <Tab> CleverTab()
" }
" Enable heavy omni completion.
if !exists('g:neocomplete#sources#omni#input_patterns')
let g:neocomplete#sources#omni#input_patterns = {}
endif
let g:neocomplete#sources#omni#input_patterns.php = '[^. \t]->\h\w*\|\h\w*::'
let g:neocomplete#sources#omni#input_patterns.perl = '\h\w*->\h\w*\|\h\w*::'
let g:neocomplete#sources#omni#input_patterns.c = '[^.[:digit:] *\t]\%(\.\|->\)'
let g:neocomplete#sources#omni#input_patterns.cpp = '[^.[:digit:] *\t]\%(\.\|->\)\|\h\w*::'
let g:neocomplete#sources#omni#input_patterns.ruby = '[^. *\t]\.\h\w*\|\h\w*::'
" }
" neocomplcache {
elseif count(g:spf13_bundle_groups, 'neocomplcache')
let g:acp_enableAtStartup = 0
let g:neocomplcache_enable_at_startup = 1
let g:neocomplcache_enable_camel_case_completion = 1
let g:neocomplcache_enable_smart_case = 1
let g:neocomplcache_enable_underbar_completion = 1
let g:neocomplcache_enable_auto_delimiter = 1
let g:neocomplcache_max_list = 15
let g:neocomplcache_force_overwrite_completefunc = 1
" Define dictionary.
let g:neocomplcache_dictionary_filetype_lists = {
\ 'default' : '',
\ 'vimshell' : $HOME.'/.vimshell_hist',
\ 'scheme' : $HOME.'/.gosh_completions'
\ }
" Define keyword.
if !exists('g:neocomplcache_keyword_patterns')
let g:neocomplcache_keyword_patterns = {}
endif
let g:neocomplcache_keyword_patterns._ = '\h\w*'
" Plugin key-mappings {
" These two lines conflict with the default digraph mapping of <C-K>
imap <C-k> <Plug>(neosnippet_expand_or_jump)
smap <C-k> <Plug>(neosnippet_expand_or_jump)
if exists('g:spf13_noninvasive_completion')
inoremap <CR> <CR>
" <ESC> takes you out of insert mode
inoremap <expr> <Esc> pumvisible() ? "\<C-y>\<Esc>" : "\<Esc>"
" <CR> accepts first, then sends the <CR>
inoremap <expr> <CR> pumvisible() ? "\<C-y>\<CR>" : "\<CR>"
" <Down> and <Up> cycle like <Tab> and <S-Tab>
inoremap <expr> <Down> pumvisible() ? "\<C-n>" : "\<Down>"
inoremap <expr> <Up> pumvisible() ? "\<C-p>" : "\<Up>"
" Jump up and down the list
inoremap <expr> <C-d> pumvisible() ? "\<PageDown>\<C-p>\<C-n>" : "\<C-d>"
inoremap <expr> <C-u> pumvisible() ? "\<PageUp>\<C-p>\<C-n>" : "\<C-u>"
else
imap <silent><expr><C-k> neosnippet#expandable() ?
\ "\<Plug>(neosnippet_expand_or_jump)" : (pumvisible() ?
\ "\<C-e>" : "\<Plug>(neosnippet_expand_or_jump)")
smap <TAB> <Right><Plug>(neosnippet_jump_or_expand)
inoremap <expr><C-g> neocomplcache#undo_completion()
inoremap <expr><C-l> neocomplcache#complete_common_string()
"inoremap <expr><CR> neocomplcache#complete_common_string()
function! CleverCr()
if pumvisible()
if neosnippet#expandable()
let exp = "\<Plug>(neosnippet_expand)"
return exp . neocomplcache#close_popup()
else
return neocomplcache#close_popup()
endif
else
return "\<CR>"
endif
endfunction
" <CR> close popup and save indent or expand snippet
imap <expr> <CR> CleverCr()
" <CR>: close popup
" <s-CR>: close popup and save indent.
inoremap <expr><s-CR> pumvisible() ? neocomplcache#close_popup()."\<CR>" : "\<CR>"
"inoremap <expr><CR> pumvisible() ? neocomplcache#close_popup() : "\<CR>"
" <C-h>, <BS>: close popup and delete backword char.
inoremap <expr><BS> neocomplcache#smart_close_popup()."\<C-h>"
inoremap <expr><C-y> neocomplcache#close_popup()
endif
" <TAB>: completion.
inoremap <expr><TAB> pumvisible() ? "\<C-n>" : "\<TAB>"
inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<TAB>"
" }
" Enable omni completion.
autocmd FileType css setlocal omnifunc=csscomplete#CompleteCSS
autocmd FileType html,markdown setlocal omnifunc=htmlcomplete#CompleteTags
autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
autocmd FileType python setlocal omnifunc=pythoncomplete#Complete
autocmd FileType xml setlocal omnifunc=xmlcomplete#CompleteTags
autocmd FileType ruby setlocal omnifunc=rubycomplete#Complete
autocmd FileType haskell setlocal omnifunc=necoghc#omnifunc
" Enable heavy omni completion.
if !exists('g:neocomplcache_omni_patterns')
let g:neocomplcache_omni_patterns = {}
endif
let g:neocomplcache_omni_patterns.php = '[^. \t]->\h\w*\|\h\w*::'
let g:neocomplcache_omni_patterns.perl = '\h\w*->\h\w*\|\h\w*::'
let g:neocomplcache_omni_patterns.c = '[^.[:digit:] *\t]\%(\.\|->\)'
let g:neocomplcache_omni_patterns.cpp = '[^.[:digit:] *\t]\%(\.\|->\)\|\h\w*::'
let g:neocomplcache_omni_patterns.ruby = '[^. *\t]\.\h\w*\|\h\w*::'
let g:neocomplcache_omni_patterns.go = '\h\w*\.\?'
" }
" Normal Vim omni-completion {
" To disable omni complete, add the following to your .vimrc.before.local file:
" let g:spf13_no_omni_complete = 1
elseif !exists('g:spf13_no_omni_complete')
" Enable omni-completion.
autocmd FileType css setlocal omnifunc=csscomplete#CompleteCSS
autocmd FileType html,markdown setlocal omnifunc=htmlcomplete#CompleteTags
autocmd FileType javascript setlocal omnifunc=javascriptcomplete#CompleteJS
autocmd FileType python setlocal omnifunc=pythoncomplete#Complete
autocmd FileType xml setlocal omnifunc=xmlcomplete#CompleteTags
autocmd FileType ruby setlocal omnifunc=rubycomplete#Complete
autocmd FileType haskell setlocal omnifunc=necoghc#omnifunc
endif
" }
" Snippets {
if count(g:spf13_bundle_groups, 'neocomplcache') ||
\ count(g:spf13_bundle_groups, 'neocomplete')
" Use honza's snippets.
let g:neosnippet#snippets_directory='~/.vim/bundle/vim-snippets/snippets'
" Enable neosnippet snipmate compatibility mode
let g:neosnippet#enable_snipmate_compatibility = 1
" For snippet_complete marker.
if !exists("g:spf13_no_conceal")
if has('conceal')
set conceallevel=2 concealcursor=i
endif
endif
" Enable neosnippets when using go
let g:go_snippet_engine = "neosnippet"
" Disable the neosnippet preview candidate window
" When enabled, there can be too much visual noise
" especially when splits are used.
set completeopt-=preview
endif
" }
"
" FIXME: Isn't this for Syntastic to handle?
" Haskell post write lint and check with ghcmod
" $ `cabal install ghcmod` if missing and ensure
" ~/.cabal/bin is in your $PATH.
if !executable("ghcmod")
autocmd BufWritePost *.hs GhcModCheckAndLintAsync
endif
" UndoTree {
if isdirectory(expand("~/.vim/bundle/undotree/"))
nnoremap <Leader>u :UndotreeToggle<CR>
" If undotree is opened, it is likely one wants to interact with it.
let g:undotree_SetFocusWhenToggle=1
endif
" }
" indent_guides {
if isdirectory(expand("~/.vim/bundle/vim-indent-guides/"))
let g:indent_guides_start_level = 2
let g:indent_guides_guide_size = 1
let g:indent_guides_enable_on_vim_startup = 1
endif
" }
" Wildfire {
let g:wildfire_objects = {
\ "*" : ["i'", 'i"', "i)", "i]", "i}", "ip"],
\ "html,xml" : ["at"],
\ }
" }
" vim-airline {
" Set configuration options for the statusline plugin vim-airline.
" Use the powerline theme and optionally enable powerline symbols.
" To use the symbols , , , , , , and .in the statusline
" segments add the following to your .vimrc.before.local file:
let g:airline_powerline_fonts=1
" If the previous symbols do not render for you then install a
" powerline enabled font.
let g:airline_detect_modified=1
let g:airline_theme='molokai' " term, 'luna'
call airline#parts#define_accent('mode', 'none')
if !exists('g:airline_symbols')
let g:airline_symbols = {}
endif
" let g:airline#extensions#tabline#enabled = 1
let g:airline#extensions#nerdtree_statusline = 1
let g:airline#extensions#tabline#formatter = 'unique_tail'
"air-line with coc-nvim
let g:airline#extensions#coc#enabled = 0
let g:airline#extensions#coc#show_coc_status = 1
let g:airline#extensions#coc#error_symbol = 'Error:'
let airline#extensions#coc#warning_symbol = 'Warning:'
let airline#extensions#coc#stl_format_err = '%E{[%e(#%fe)]}'
let airline#extensions#coc#stl_format_warn = '%W{[%w(#%fw)]}'
" See `:echo g:airline_theme_map` for some more choices
" Default in terminal vim is 'dark'
if isdirectory(expand("~/.vim/bundle/vim-airline-themes/"))
if !exists('g:airline_theme')
"let g:airline_theme = 'solarized'
endif
if !exists('g:airline_powerline_fonts')
" Use the default set of separators with a few customizations
let g:airline_left_sep='›' " Slightly fancier than '>'
let g:airline_right_sep='‹' " Slightly fancier than '<'
endif
if isdirectory(expand("~/.vim/bundle/vim-bufferline"))
let g:bufferline_echo = 1
let g:bufferline_active_highlight = 'StatusLine'
let g:bufferline_inactive_highlight = 'StatusLineNC'
let g:bufferline_active_buffer_left = ''
let g:bufferline_active_buffer_right = ''
let g:bufferline_show_bufnr = ' 1 '
let g:bufferline_inactive_highlight = 'StatusLineNC'
let g:bufferline_active_highlight = 'StatusLine'
endif
endif
" }
" easymotion {
if isdirectory(expand("~/.vim/bundle/vim-easymotion"))
let g:EasyMotion_smartcase = 1
nmap s <Plug>(easymotion-s2)
" nmap t <Plug>(easymotion-t2)
" " Gif config
map <leader>/ <Plug>(easymotion-sn)
omap <leader>/ <Plug>(easymotion-tn)
" These `n` & `N` mappings are options. You do not have to map `n` & `N` to EasyMotion.
" Without these mappings, `n` & `N` works fine. (These mappings just provide
" different highlight method and have some other features )
"map n <Plug>(easymotion-next)
"map N <Plug>(easymotion-prev)
endif
" }
" }
" GUI Settings {
" GVIM- (here instead of .gvimrc)
if has('gui_running')
set guioptions-=T " Remove the toolbar
set lines=85 " 80 lines of text instead of 24
set columns=160
if !exists("g:spf13_no_big_font")
if LINUX() && has("gui_running")
set guifont=Ubuntu\ Mono\ derivative\ Powerline:h12,Ubuntu\
Mono:h11,Andale\ Mono\ Regular\ 12,Menlo\ Regular\
11,Consolas\ Regular\ 12,Courier\ New\ Regular:h14
elseif OSX() && has("gui_running")
set guifont=MesloLGS\ NF:h10,Andale\ Mono\ Regular:h12,Menlo\ Regular:h11,Consolas\ Regular:h12,Courier\ New\ Regular:h14
elseif WINDOWS() && has("gui_running")
set guifont=Ubuntu\ Mono:h12,Andale_Mono:h10,Menlo:h10,Consolas:h10,Courier_New:h10
endif
endif
set visualbell
else
if &term == 'xterm' || &term == 'screen'
set t_Co=256 " Enable 256 colors to stop the CSApprox warning and make xterm vim shine
endif
"set term=builtin_ansi " Make arrow and other keys work
endif
" }
" Functions {
" Initialize directories {
function! InitializeDirectories()
let parent = $HOME
let prefix = 'vim'
let dir_list = {
\ 'backup': 'backupdir',
\ 'views': 'viewdir',
\ 'swap': 'directory' }
if has('persistent_undo')
let dir_list['undo'] = 'undodir'
endif
" To specify a different directory in which to place the vimbackup,
" vimviews, vimundo, and vimswap files/directories, add the following to
" your .vimrc.before.local file:
" let g:spf13_consolidated_directory = <full path to desired directory>
" eg: let g:spf13_consolidated_directory = $HOME . '/.vim/'
if exists('g:spf13_consolidated_directory')
let common_dir = g:spf13_consolidated_directory . prefix
else
let common_dir = parent . '/.' . prefix
endif
for [dirname, settingname] in items(dir_list)
let directory = common_dir . dirname . '/'
if exists("*mkdir")
if !isdirectory(directory)
call mkdir(directory)
endif
endif
if !isdirectory(directory)
echo "Warning: Unable to create backup directory: " . directory
echo "Try: mkdir -p " . directory
else
let directory = substitute(directory, " ", "\\\\ ", "g")
exec "set " . settingname . "=" . directory
endif
endfor
endfunction
call InitializeDirectories()
" }
" Initialize NERDTree as needed {
function! NERDTreeInitAsNeeded()
redir => bufoutput
buffers!
redir END
let idx = stridx(bufoutput, "NERD_tree")
if idx > -1
NERDTreeMirror
NERDTreeFind
wincmd l
endif
endfunction
" }
" Strip whitespace {
function! StripTrailingWhitespace()
" Preparation: save last search, and cursor position.
let _s=@/
let l = line(".")
let c = col(".")
" do the business:
%s/\s\+$//e
" clean up: restore previous search history, and cursor position
let @/=_s
call cursor(l, c)
endfunction
" }
" Shell command {
function! s:RunShellCommand(cmdline)
botright new
setlocal buftype=nofile
setlocal bufhidden=delete
setlocal nobuflisted
setlocal noswapfile
setlocal nowrap
setlocal filetype=shell
setlocal syntax=shell
call setline(1, a:cmdline)
call setline(2, substitute(a:cmdline, '.', '=', 'g'))
execute 'silent $read !' . escape(a:cmdline, '%#')
setlocal nomodifiable
1
endfunction
command! -complete=file -nargs=+ Shell call s:RunShellCommand(<q-args>)
" e.g. Grep current file for <search_term>: Shell grep -Hn <search_term> %
" }
function! s:IsSpf13Fork()
let s:is_fork = 0
let s:fork_files = ["~/.vimrc.fork", "~/.vimrc.before.fork", "~/.vimrc.bundles.fork"]
for fork_file in s:fork_files
if filereadable(expand(fork_file, ":p"))
let s:is_fork = 1
break
endif
endfor
return s:is_fork
endfunction
function! s:ExpandFilenameAndExecute(command, file)
execute a:command . " " . expand(a:file, ":p")
endfunction
function! s:EditSpf13Config()
call <SID>ExpandFilenameAndExecute("tabedit", "~/.vimrc")
call <SID>ExpandFilenameAndExecute("vsplit", "~/.vimrc.before")
call <SID>ExpandFilenameAndExecute("vsplit", "~/.vimrc.bundles")
execute bufwinnr(".vimrc") . "wincmd w"
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.local")
wincmd l
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.before.local")
wincmd l
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.bundles.local")
if <SID>IsSpf13Fork()
execute bufwinnr(".vimrc") . "wincmd w"
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.fork")
wincmd l
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.before.fork")
wincmd l
call <SID>ExpandFilenameAndExecute("split", "~/.vimrc.bundles.fork")
endif
execute bufwinnr(".vimrc.local") . "wincmd w"
endfunction
execute "noremap " . s:spf13_edit_config_mapping " :call <SID>EditSpf13Config()<CR>"
execute "noremap " . s:spf13_apply_config_mapping . " :source ~/.vimrc<CR>"
" }
" Use fork vimrc if available {
if filereadable(expand("~/.vimrc.fork"))
source ~/.vimrc.fork
endif
" }
" Use local vimrc if available {
if filereadable(expand("~/.vimrc.local"))
source ~/.vimrc.local
endif
" }
" Use local gvimrc if available and gui is running {
if has('gui_running')
if filereadable(expand("~/.gvimrc.local"))
source ~/.gvimrc.local
endif
endif
" }and another: .vimrc.local
set relativenumber
set wrap
set foldenable
set foldmethod=syntax
set foldnestmax=2
set foldcolumn=1
setlocal foldlevel=1
set foldlevelstart=99
set autoread
set vb t_vb=
set visualbell
set noerrorbells
set smartcase
" set background=dark
autocmd VimEnter * set nospell
" Set internal encoding of vim, not needed on neovim, since coc.nvim using some
" unicode characters in the file autoload/float.vim
set encoding=utf-8
" TextEdit might fail if hidden is not set.
set hidden
" Some servers have issues with backup files, see #649.
set nobackup
set nowritebackup
" Give more space for displaying messages.
set cmdheight=2
" Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable
" delays and poor user experience.
set updatetime=300
" Don't pass messages to |ins-completion-menu|.
set shortmess+=c
" Always show the signcolumn, otherwise it would shift the text each time
" diagnostics appear/become resolved.
if has("nvim-0.5.0") || has("patch-8.1.1564")
" Recently vim can merge signcolumn and number column into one
set signcolumn=number
else
set signcolumn=yes
endif
if g:colors_name == 'catppuccin'
hi NormalFloat term=reverse ctermbg=24 guifg=#cdd6f4 guibg=#353535
endif
hi default link CocFloating NormalFloat
if &background == 'light'
hi CursorColumn guibg=#72abcf term=reverse ctermbg=24
else
hi CursorColumn guibg=#124b7f term=reverse ctermbg=24
endif
" hi Pmenu term=reverse ctermfg=17 ctermbg=168
" hi PmenuSel term=reverse ctermfg=17 ctermbg=173
" hi CursorLine ctermbg=236 guibg=#2c323c
" ---------------------> Ack <---------------------
cnoreabbrev Ack Ack!
nnoremap <nowait> <Leader><Leader>a :Ack!<Space>
" 让ack.vim使用ag作为搜索工具, 先安装ag: brew install ag
" let g:ackprg = 'ag --nogroup --column'
" ---------------------> fzf <---------------------
" https://www.bilibili.com/video/BV1254y1e71F/?vd_source=6aafb4e5f1c858dd679e8850c5d6f1f7
" for preview syntax highlight: brew install bat
nnoremap <C-f> :Files<Cr>
nnoremap <C-p> :Buffers<Cr>
nnoremap <C-h> :History<Cr>
" let g:fzf_layout = {'down' : '40%'}
"
function! SynStack()
if !exists("*synstack")
return
endif
echo map(synstack(line('.'), col('.')), 'synIDattr(v:val, "name")')
endfunc@zl03jsj could you please provide a minimal vimrc instead of whole config file ? My guess is that the issue lies with the colorscheme you are using.
zl03jsj
commented
2 years ago @zl03jsj could you please provide a minimal vimrc instead of whole config file ? My guess is that the issue lies with the colorscheme you are using.
ok, i will do some research on this.
needs some help.. the color in 'background=dark' looks good, once change to 'light' the color looks weird