search

antonchromjak / MINI4

120 stars 47 forks source link

LM5113 pinout incorrect. Wrong chip? #3

Open elektrinis opened 6 years ago

elektrinis commented 6 years ago

Schematics pinout is all mixed up for U1-U3. The chips are kinda similar to LM5113, but some pins are missing and others are mixed up. Also this chip is not for new designs.

antonchromjak commented 6 years ago

thanks

On Sun, May 6, 2018 at 5:00 PM, elektrinis notifications@github.com wrote:

Schematics pinout is all mixed up for U1-U3. The chips are kinda similar to LM5113, but some pins are missing and others are mixed up. Also this chip is not for new designs.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/antonchromjak/MINI4/issues/3, or mute the thread https://github.com/notifications/unsubscribe-auth/ACCsZRGV0nnIpZLHXxPvcUuErimk8DO5ks5tvxApgaJpZM4T0EUd .

MaximDavudov commented 2 weeks ago

Hello, Anton, thank you very much for this project, you are very helpful, I'm going to use this regulator in my robotic hand project, but can you tell me if this error has been fixed? if so, how can I find a common solution? tg: @maximdavudov

antonchromjak commented 2 weeks ago

There was no error

Dňa st 13. 11. 2024, 7:20 MaximDavudov @.***> napísal(a):

Hello, Anton, thank you very much for this project, you are very helpful, I'm going to use this regulator in my robotic hand project, but can you tell me if this error has been fixed? if so, how can I find a common solution? tg: @MaximDavudov https://github.com/MaximDavudov

— Reply to this email directly, view it on GitHub https://github.com/antonchromjak/MINI4/issues/3#issuecomment-2472551110, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAQKYZNE33NVQPCPFKBHKXT2ALVUBAVCNFSM6AAAAABRVWO5Y6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINZSGU2TCMJRGA . You are receiving this because you commented.Message ID: @.***>

MaximDavudov commented 2 weeks ago

Understood, thanks for the answer)) tell me how I can contact you, I'm new to this topic, I'd appreciate it

antonchromjak commented 2 weeks ago

@.***

Dňa st 13. 11. 2024, 8:25 MaximDavudov @.***> napísal(a):

Understood, thanks for the answer)) tell me how I can contact you, I'm new to this topic, I'd appreciate it

— Reply to this email directly, view it on GitHub https://github.com/antonchromjak/MINI4/issues/3#issuecomment-2472682070, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAQKYZL427URYB5HE3N5EV32AL5HFAVCNFSM6AAAAABRVWO5Y6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINZSGY4DEMBXGA . You are receiving this because you commented.Message ID: @.***>