Open GoogleCodeExporter opened 9 years ago
I tried to kill and restart the program.elf as advised in some of the forums,
but this did not help. Here's the relevant part of the log:
Thread AT Commands Server Start
Socket opening failed
Socket opening failed
391.648479 Video 6 1102 Camera OK => Launch main video
391.649727 Video_Hori 6 1103 Camera OK => Launch main video
[WW] POS (thread log_thread (0x1656ec)) suspending current thread, possible
deadlock
391.658705 FlashMgr 6 1100 Mykonos Configuration saved
391.903370 Master 6 1104 BLC new hex available
391.904085 FlashMgr 6 1100 Unable to load trims because file
/data/fact_trims.bin is missing
391.913021 FlashMgr 6 1100 Unable to load trims because file
/data/trims.bin is missing
391.922165 FlashMgr 6 1100 Mykonos Accs Infos loaded from
/data/fact_accs_infos.bin: val(0) = 32.355583; val(1) = 41.310760; val(2) =
-974.638184
391.930194 Master 6 1104 BLC call for motor 1
391.930495 Master 6 1104 BLC motor 1 flash & start FAILED
391.931851 FlashMgr 6 1100 Mykonos Accs Infos loaded from
/data/accs_infos.bin: val(0) = 58.710648; val(1) = 31.684563; val(2) =
-969.591064
391.990042 Master 6 1104 BLC call for motor 2
391.990398 Master 6 1104 BLC start flash
391.995431 Master 6 1104 BLC flash aborted
391.995591 Master 6 1104 BLC verify
vision camera config truly vga
392.990069 Master 6 1104 BLC verify FAILED - page 0
392.990245 Master 6 1104 BLC motor 2 flash & start FAILED
393.050042 Master 6 1104 BLC call for motor 3
393.162374 Master 6 1104 BLC motor 3 soft version 1.11, hard version 3.0,
supplier 1.1, lot number 06/10, FVT1 01/06/10
393.220085 Master 6 1104 BLC call for motor 4
394.220073 Master 6 1104 BLC motor 4 flash & start FAILED
394.250078 Master 6 1104 BLC motor 1 dead
394.250242 Master 6 1104 BLC motor 2 dead
394.250336 Master 6 1104 BLC motor 4 dead
394.250427 Master 6 1104 BLC reflash required, perform off/on cycle
!!! Emergency landing from
/home/aferran/.ardrone/mykonos/ARDrone_Branch_20100827_1_3/Mykonos/Soft/Build/..
/../Soft/Toy//Os/elinux/Control/motors.c:1004. Reason is Motors have not been
initialized correctly !!!394.280739 Acquisition 6 1098 HARD VERSION 00
394.280911 Acquisition 6 1098 change the ultrasound frequency. 25Hz
As you can see the flashing of the motors failed. Does anyone know how to avoid
this?
Original comment by arnusc...@xylon.de
on 6 Jan 2012 at 12:57
Original issue reported on code.google.com by
arnusc...@xylon.de
on 19 Dec 2011 at 9:39