search

anuragchandela / wii-esc

Automatically exported from code.google.com/p/wii-esc
0 stars 0 forks source link

After flash ZTW12A with bs_nfet, OneShot and Bootloader via TurnigyLinker no Connect #15

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
I flashed a ZTW12a with bs_nfet, OneShot-Option and activated Bootloader via 
USB TurnigyLinker.

I've get no error only ok messages.

Since that time, I can't flash this ESC anymore (with BlHeli). I've read fuses 
from other usable ZTWs (low 2e high cf lock ff) and write it manually via ISP. 
I can't reflash they via BlHeli. Then I reflash they manually via ISP with 
blheli-hex, but I can't connect it anymore - only with ISP I could read, fuses, 
eeprom, hex;

Any Ideas?

I think the chip is to heaven...

Original issue reported on code.google.com by schoppl...@gmail.com on 12 Mar 2015 at 5:10

GoogleCodeExporter commented 9 years ago 
Hi,

I think, you need:
1) Flash USBLinker.hex through ISP
2) Set hfuse to 0xC2 through ISP

after that, you should be able to flash any desired firmware through USBLinker.

Original comment by d.kayu...@gmail.com on 9 Apr 2015 at 1:37

GoogleCodeExporter commented 9 years ago 
Also, bear in mind, that wii-esc does not have "Jump to bootloader" feature, so 
you need to power-up esc after connecting linker to servo wire.

Original comment by d.kayu...@gmail.com on 9 Apr 2015 at 1:47