shreemaan-abhishek
commented
1 year ago Which version are you running on?
Closed wanghaolonggit closed 1 year ago
shreemaan-abhishek
commented
1 year ago Which version are you running on?
Revolyssup
commented
1 year ago @wanghaolonggit can you provide your config file?
wanghaolonggit
commented
1 year ago version 3.2
wanghaolonggit
commented
1 year ago data_plane config
apisix:
# node_listen: 9080 # APISIX listening port
node_listen: # This style support multiple ports
- 9080
# - port: 9081
# enable_http2: true # If not set, the default value is `false`.
# - ip: 127.0.0.2 # Specific IP, If not set, the default value is `0.0.0.0`.
# port: 9082
# enable_http2: true
enable_admin: true
enable_dev_mode: false # Sets nginx worker_processes to 1 if set to true
enable_reuseport: true # Enable nginx SO_REUSEPORT switch if set to true.
show_upstream_status_in_response_header: false # when true all upstream status write to `X-APISIX-Upstream-Status` otherwise only 5xx code
enable_ipv6: true
#proxy_protocol: # Proxy Protocol configuration
# listen_http_port: 9181 # The port with proxy protocol for http, it differs from node_listen and admin_listen.
# This port can only receive http request with proxy protocol, but node_listen & admin_listen
# can only receive http request. If you enable proxy protocol, you must use this port to
# receive http request with proxy protocol
# listen_https_port: 9182 # The port with proxy protocol for https
# enable_tcp_pp: true # Enable the proxy protocol for tcp proxy, it works for stream_proxy.tcp option
# enable_tcp_pp_to_upstream: true # Enables the proxy protocol to the upstream server
enable_server_tokens: true # Whether the APISIX version number should be shown in Server header.
# It's enabled by default.
# configurations to load third party code and/or override the builtin one.
extra_lua_path: "" # extend lua_package_path to load third party code
extra_lua_cpath: "" # extend lua_package_cpath to load third party code
#lua_module_hook: "my_project.my_hook" # the hook module which will be used to inject third party code into APISIX
proxy_cache: # Proxy Caching configuration
cache_ttl: 10s # The default caching time in disk if the upstream does not specify the cache time
zones: # The parameters of a cache
- name: disk_cache_one # The name of the cache, administrator can specify
# which cache to use by name in the admin api (disk|memory)
memory_size: 50m # The size of shared memory, it's used to store the cache index for
# disk strategy, store cache content for memory strategy (disk|memory)
disk_size: 1G # The size of disk, it's used to store the cache data (disk)
disk_path: /tmp/disk_cache_one # The path to store the cache data (disk)
cache_levels: 1:2 # The hierarchy levels of a cache (disk)
#- name: disk_cache_two
# memory_size: 50m
# disk_size: 1G
# disk_path: "/tmp/disk_cache_two"
# cache_levels: "1:2"
- name: memory_cache
memory_size: 50m
delete_uri_tail_slash: false # delete the '/' at the end of the URI
# The URI normalization in servlet is a little different from the RFC's.
# See https://github.com/jakartaee/servlet/blob/master/spec/src/main/asciidoc/servlet-spec-body.adoc#352-uri-path-canonicalization,
# which is used under Tomcat.
# Turn this option on if you want to be compatible with servlet when matching URI path.
normalize_uri_like_servlet: false
router:
http: radixtree_uri # radixtree_uri: match route by uri(base on radixtree)
# radixtree_host_uri: match route by host + uri(base on radixtree)
# radixtree_uri_with_parameter: like radixtree_uri but match uri with parameters,
# see https://github.com/api7/lua-resty-radixtree/#parameters-in-path for
# more details.
ssl: radixtree_sni # radixtree_sni: match route by SNI(base on radixtree)
#stream_proxy: # TCP/UDP proxy
# only: true # use stream proxy only, don't enable HTTP stuff
# tcp: # TCP proxy port list
# - addr: 9100
# tls: true
# - addr: "127.0.0.1:9101"
# udp: # UDP proxy port list
# - 9200
# - "127.0.0.1:9201"
#dns_resolver: # If not set, read from `/etc/resolv.conf`
# - 1.1.1.1
# - 8.8.8.8
#dns_resolver_valid: 30 # if given, override the TTL of the valid records. The unit is second.
resolver_timeout: 5 # resolver timeout
enable_resolv_search_opt: true # enable search option in resolv.conf
ssl:
enable: true
listen: # APISIX listening port in https.
- port: 9443
enable_http2: true
# - ip: 127.0.0.3 # Specific IP, If not set, the default value is `0.0.0.0`.
# port: 9445
# enable_http2: true
#ssl_trusted_certificate: /path/to/ca-cert # Specifies a file path with trusted CA certificates in the PEM format
# used to verify the certificate when APISIX needs to do SSL/TLS handshaking
# with external services (e.g. etcd)
ssl_protocols: TLSv1.2 TLSv1.3
ssl_ciphers: ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
ssl_session_tickets: false # disable ssl_session_tickets by default for 'ssl_session_tickets' would make Perfect Forward Secrecy useless.
# ref: https://github.com/mozilla/server-side-tls/issues/135
key_encrypt_salt: # If not set, will save origin ssl key into etcd.
- edd1c9f0985e76a2 # If set this, the key_encrypt_salt should be an array whose elements are string, and the size is also 16, and it will encrypt ssl key with AES-128-CBC
# !!! So do not change it after saving your ssl, it can't decrypt the ssl keys have be saved if you change !!
# Only use the first key to encrypt, and decrypt in the order of the array.
#fallback_sni: "my.default.domain" # If set this, when the client doesn't send SNI during handshake, the fallback SNI will be used instead
enable_control: true
control:
ip: 127.0.0.1
port: 9092
disable_sync_configuration_during_start: false # safe exit. Remove this once the feature is stable
data_encryption: # add `encrypt_fields = { $field },` in plugin schema to enable encryption
enable: false # if not set, the default value is `false`.
keyring:
- qeddd145sfvddff3 # If not set, will save origin value into etcd.
# If set this, the keyring should be an array whose elements are string, and the size is also 16, and it will encrypt fields with AES-128-CBC
# !!! So do not change it after encryption, it can't decrypt the fields have be saved if you change !!
# Only use the first key to encrypt, and decrypt in the order of the array.
nginx_config: # config for render the template to generate nginx.conf
#user: root # specifies the execution user of the worker process.
# the "user" directive makes sense only if the master process runs with super-user privileges.
# if you're not root user,the default is current user.
error_log: logs/error.log
error_log_level: warn # warn,error
worker_processes: auto # if you want use multiple cores in container, you can inject the number of cpu as environment variable "APISIX_WORKER_PROCESSES"
enable_cpu_affinity: false # disable CPU affinity by default, if APISIX is deployed on a physical machine, it can be enabled and work well.
worker_rlimit_nofile: 20480 # the number of files a worker process can open, should be larger than worker_connections
worker_shutdown_timeout: 240s # timeout for a graceful shutdown of worker processes
max_pending_timers: 16384 # increase it if you see "too many pending timers" error
max_running_timers: 4096 # increase it if you see "lua_max_running_timers are not enough" error
event:
worker_connections: 10620
#envs: # allow to get a list of environment variables
# - TEST_ENV
meta:
lua_shared_dict:
prometheus-metrics: 15m
stream:
enable_access_log: false # enable access log or not, default false
access_log: logs/access_stream.log
access_log_format: "$remote_addr [$time_local] $protocol $status $bytes_sent $bytes_received $session_time"
# create your custom log format by visiting http://nginx.org/en/docs/varindex.html
access_log_format_escape: default # allows setting json or default characters escaping in variables
lua_shared_dict:
etcd-cluster-health-check-stream: 10m
lrucache-lock-stream: 10m
plugin-limit-conn-stream: 10m
worker-events-stream: 10m
tars-stream: 1m
# As user can add arbitrary configurations in the snippet,
# it is user's responsibility to check the configurations
# don't conflict with APISIX.
main_configuration_snippet: |
# Add custom Nginx main configuration to nginx.conf.
# The configuration should be well indented!
http_configuration_snippet: |
# Add custom Nginx http configuration to nginx.conf.
# The configuration should be well indented!
http_server_configuration_snippet: |
# Add custom Nginx http server configuration to nginx.conf.
# The configuration should be well indented!
http_server_location_configuration_snippet: |
# Add custom Nginx http server location configuration to nginx.conf.
# The configuration should be well indented!
http_admin_configuration_snippet: |
# Add custom Nginx admin server configuration to nginx.conf.
# The configuration should be well indented!
http_end_configuration_snippet: |
# Add custom Nginx http end configuration to nginx.conf.
# The configuration should be well indented!
stream_configuration_snippet: |
# Add custom Nginx stream configuration to nginx.conf.
# The configuration should be well indented!
http:
enable_access_log: true # enable access log or not, default true
access_log: logs/access.log
access_log_format: "$remote_addr - $remote_user [$time_local] $http_host \"$request\" $status $body_bytes_sent $request_time \"$http_referer\" \"$http_user_agent\" $upstream_addr $upstream_status $upstream_response_time \"$upstream_scheme://$upstream_host$upstream_uri\""
access_log_format_escape: default # allows setting json or default characters escaping in variables
keepalive_timeout: 60s # timeout during which a keep-alive client connection will stay open on the server side.
client_header_timeout: 60s # timeout for reading client request header, then 408 (Request Time-out) error is returned to the client
client_body_timeout: 60s # timeout for reading client request body, then 408 (Request Time-out) error is returned to the client
client_max_body_size: 0 # The maximum allowed size of the client request body.
# If exceeded, the 413 (Request Entity Too Large) error is returned to the client.
# Note that unlike Nginx, we don't limit the body size by default.
send_timeout: 10s # timeout for transmitting a response to the client.then the connection is closed
underscores_in_headers: "on" # default enables the use of underscores in client request header fields
real_ip_header: X-Real-IP # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
real_ip_recursive: "off" # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_recursive
real_ip_from: # http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
- 127.0.0.1
- "unix:"
#custom_lua_shared_dict: # add custom shared cache to nginx.conf
# ipc_shared_dict: 100m # custom shared cache, format: `cache-key: cache-size`
# Enables or disables passing of the server name through TLS Server Name Indication extension (SNI, RFC 6066)
# when establishing a connection with the proxied HTTPS server.
proxy_ssl_server_name: true
upstream:
keepalive: 320 # Sets the maximum number of idle keepalive connections to upstream servers that are preserved in the cache of each worker process.
# When this number is exceeded, the least recently used connections are closed.
keepalive_requests: 1000 # Sets the maximum number of requests that can be served through one keepalive connection.
# After the maximum number of requests is made, the connection is closed.
keepalive_timeout: 60s # Sets a timeout during which an idle keepalive connection to an upstream server will stay open.
charset: utf-8 # Adds the specified charset to the "Content-Type" response header field, see
# http://nginx.org/en/docs/http/ngx_http_charset_module.html#charset
variables_hash_max_size: 2048 # Sets the maximum size of the variables hash table.
lua_shared_dict:
internal-status: 10m
plugin-limit-req: 10m
plugin-limit-count: 10m
prometheus-metrics: 10m
plugin-limit-conn: 10m
upstream-healthcheck: 10m
worker-events: 10m
lrucache-lock: 10m
balancer-ewma: 10m
balancer-ewma-locks: 10m
balancer-ewma-last-touched-at: 10m
plugin-limit-count-redis-cluster-slot-lock: 1m
tracing_buffer: 10m
plugin-api-breaker: 10m
etcd-cluster-health-check: 10m
discovery: 1m
jwks: 1m
introspection: 10m
access-tokens: 1m
ext-plugin: 1m
tars: 1m
cas-auth: 10m
graphql:
max_size: 1048576 # the maximum size limitation of graphql in bytes, default 1MiB
#ext-plugin:
#cmd: ["ls", "-l"]
plugins: # plugin list (sorted by priority)
- real-ip # priority: 23000
- ai # priority: 22900
- client-control # priority: 22000
- proxy-control # priority: 21990
- request-id # priority: 12015
- zipkin # priority: 12011
#- skywalking # priority: 12010
#- opentelemetry # priority: 12009
- ext-plugin-pre-req # priority: 12000
- fault-injection # priority: 11000
- mocking # priority: 10900
- serverless-pre-function # priority: 10000
#- batch-requests # priority: 4010
- cors # priority: 4000
- ip-restriction # priority: 3000
- ua-restriction # priority: 2999
- referer-restriction # priority: 2990
- csrf # priority: 2980
- uri-blocker # priority: 2900
- request-validation # priority: 2800
- openid-connect # priority: 2599
- cas-auth # priority: 2597
- authz-casbin # priority: 2560
- authz-casdoor # priority: 2559
- wolf-rbac # priority: 2555
- ldap-auth # priority: 2540
- hmac-auth # priority: 2530
- basic-auth # priority: 2520
- jwt-auth # priority: 2510
- key-auth # priority: 2500
- consumer-restriction # priority: 2400
- forward-auth # priority: 2002
- opa # priority: 2001
- authz-keycloak # priority: 2000
#- error-log-logger # priority: 1091
- body-transformer # priority: 1080
- proxy-mirror # priority: 1010
- proxy-cache # priority: 1009
- proxy-rewrite # priority: 1008
- workflow # priority: 1006
- api-breaker # priority: 1005
- limit-conn # priority: 1003
- limit-count # priority: 1002
- limit-req # priority: 1001
#- node-status # priority: 1000
- gzip # priority: 995
- server-info # priority: 990
- traffic-split # priority: 966
- redirect # priority: 900
- response-rewrite # priority: 899
- degraphql # priority: 509
- kafka-proxy # priority: 508
#- dubbo-proxy # priority: 507
- grpc-transcode # priority: 506
- grpc-web # priority: 505
- public-api # priority: 501
- prometheus # priority: 500
- datadog # priority: 495
- elasticsearch-logger # priority: 413
- echo # priority: 412
- loggly # priority: 411
- http-logger # priority: 410
- splunk-hec-logging # priority: 409
- skywalking-logger # priority: 408
- google-cloud-logging # priority: 407
- sls-logger # priority: 406
- tcp-logger # priority: 405
- kafka-logger # priority: 403
- rocketmq-logger # priority: 402
- syslog # priority: 401
- udp-logger # priority: 400
- file-logger # priority: 399
- clickhouse-logger # priority: 398
- tencent-cloud-cls # priority: 397
- inspect # priority: 200
#- log-rotate # priority: 100
# <- recommend to use priority (0, 100) for your custom plugins
- example-plugin # priority: 0
#- gm # priority: -43
- aws-lambda # priority: -1899
- azure-functions # priority: -1900
- openwhisk # priority: -1901
- openfunction # priority: -1902
- serverless-post-function # priority: -2000
- ext-plugin-post-req # priority: -3000
- ext-plugin-post-resp # priority: -4000
- userinfo # priority: 30000
- test # priority: 30001
- watermark # priority: 29000
stream_plugins: # sorted by priority
- ip-restriction # priority: 3000
- limit-conn # priority: 1003
- mqtt-proxy # priority: 1000
#- prometheus # priority: 500
- syslog # priority: 401
# <- recommend to use priority (0, 100) for your custom plugins
#wasm:
#plugins:
#- name: wasm_log
#priority: 7999
#file: t/wasm/log/main.go.wasm
#xrpc:
#protocols:
#- name: pingpong
plugin_attr:
log-rotate:
interval: 3600 # rotate interval (unit: second)
max_kept: 168 # max number of log files will be kept
max_size: -1 # max size bytes of log files to be rotated, size check would be skipped with a value less than 0
enable_compression: false # enable log file compression(gzip) or not, default false
skywalking:
service_name: APISIX
service_instance_name: APISIX Instance Name
endpoint_addr: http://127.0.0.1:12800
opentelemetry:
trace_id_source: x-request-id
resource:
service.name: APISIX
collector:
address: 127.0.0.1:4318
request_timeout: 3
request_headers:
Authorization: token
batch_span_processor:
drop_on_queue_full: false
max_queue_size: 1024
batch_timeout: 2
inactive_timeout: 1
max_export_batch_size: 16
prometheus:
export_uri: /apisix/prometheus/metrics
metric_prefix: apisix_
enable_export_server: true
export_addr:
ip: 127.0.0.1
port: 9091
#metrics:
# http_status:
# # extra labels from nginx variables
# extra_labels:
# # the label name doesn't need to be the same as variable name
# # below labels are only examples, you could add any valid variables as you need
# - upstream_addr: $upstream_addr
# - upstream_status: $upstream_status
# http_latency:
# extra_labels:
# - upstream_addr: $upstream_addr
# bandwidth:
# extra_labels:
# - upstream_addr: $upstream_addr
server-info:
report_ttl: 60 # live time for server info in etcd (unit: second)
dubbo-proxy:
upstream_multiplex_count: 32
request-id:
snowflake:
enable: false
snowflake_epoc: 1609459200000 # the starting timestamp is expressed in milliseconds
data_machine_bits: 12 # data machine bit, maximum 31, because Lua cannot do bit operations greater than 31
sequence_bits: 10 # each machine generates a maximum of (1 << sequence_bits) serial numbers per millisecond
data_machine_ttl: 30 # live time for data_machine in etcd (unit: second)
data_machine_interval: 10 # lease renewal interval in etcd (unit: second)
proxy-mirror:
timeout: # proxy timeout in mirrored sub-request
connect: 60s
read: 60s
send: 60s
# redirect:
# https_port: 8443 # the default port for use by HTTP redirects to HTTPS
inspect:
delay: 3 # in seconds
hooks_file: "/usr/local/apisix/plugin_inspect_hooks.lua"
deployment:
role: data_plane
role_data_plane:
config_provider: control_plane
control_plane:
host:
- https://phoenix-core-control.zerotrust.svc.cluster.local:9280
prefix: /apisix
timeout: 30
user: root # root username for etcd
password: eYVX7EwVmmxKPCDmwMtyKVge8oLd2t81 # root password for etcd
use_grpc: false # enable the experimental configuration sync via gRPC
tls:
# To enable etcd client certificate you need to build APISIX-Base, see
# https://apisix.apache.org/docs/apisix/FAQ#how-do-i-build-the-apisix-base-environment
#cert: /path/to/cert # path of certificate used by the etcd client
#key: /path/to/key # path of key used by the etcd client
verify: false # whether to verify the etcd endpoint certificate when setup a TLS connection to etcd,
# the default value is true, e.g. the certificate will be verified strictly.
#sni: # the SNI for etcd TLS requests. If missed, the host part of the URL will be used.
certs:
cert: /path/to/client.cer
cert_key: /path/to/client.key
trusted_ca_cert: /path/to/ca.cercontrol_plane config
apisix:
node_listen: # This style support multiple ports
- 9080
enable_admin: true
enable_dev_mode: false # Sets nginx worker_processes to 1 if set to true
enable_reuseport: true # Enable nginx SO_REUSEPORT switch if set to true.
show_upstream_status_in_response_header: false # when true all upstream status write to `X-APISIX-Upstream-Status` otherwise only 5xx code
enable_ipv6: true
enable_server_tokens: true # Whether the APISIX version number should be shown in Server header.
extra_lua_path: "" # extend lua_package_path to load third party code
extra_lua_cpath: "" # extend lua_package_cpath to load third party code
proxy_cache: # Proxy Caching configuration
cache_ttl: 10s # The default caching time in disk if the upstream does not specify the cache time
zones: # The parameters of a cache
- name: disk_cache_one # The name of the cache, administrator can specify
# which cache to use by name in the admin api (disk|memory)
memory_size: 50m # The size of shared memory, it's used to store the cache index for
# disk strategy, store cache content for memory strategy (disk|memory)
disk_size: 1G # The size of disk, it's used to store the cache data (disk)
disk_path: /tmp/disk_cache_one # The path to store the cache data (disk)
cache_levels: 1:2 # The hierarchy levels of a cache (disk)
- name: memory_cache
memory_size: 50m
delete_uri_tail_slash: false # delete the '/' at the end of the URI
# The URI normalization in servlet is a little different from the RFC's.
# See https://github.com/jakartaee/servlet/blob/master/spec/src/main/asciidoc/servlet-spec-body.adoc#352-uri-path-canonicalization,
# which is used under Tomcat.
# Turn this option on if you want to be compatible with servlet when matching URI path.
normalize_uri_like_servlet: false
router:
http: radixtree_uri # radixtree_uri: match route by uri(base on radixtree)
# radixtree_host_uri: match route by host + uri(base on radixtree)
# radixtree_uri_with_parameter: like radixtree_uri but match uri with parameters,
# see https://github.com/api7/lua-resty-radixtree/#parameters-in-path for
# more details.
ssl: radixtree_sni # radixtree_sni: match route by SNI(base on radixtree)
resolver_timeout: 5 # resolver timeout
enable_resolv_search_opt: true # enable search option in resolv.conf
ssl:
enable: true
listen: # APISIX listening port in https.
- port: 9443
enable_http2: true
# - ip: 127.0.0.3 # Specific IP, If not set, the default value is `0.0.0.0`.
# port: 9445
# enable_http2: true
#ssl_trusted_certificate: /path/to/ca-cert # Specifies a file path with trusted CA certificates in the PEM format
# used to verify the certificate when APISIX needs to do SSL/TLS handshaking
# with external services (e.g. etcd)
ssl_protocols: TLSv1.2 TLSv1.3
ssl_ciphers: ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
ssl_session_tickets: false # disable ssl_session_tickets by default for 'ssl_session_tickets' would make Perfect Forward Secrecy useless.
# ref: https://github.com/mozilla/server-side-tls/issues/135
key_encrypt_salt: # If not set, will save origin ssl key into etcd.
- edd1c9f0985e76a2 # If set this, the key_encrypt_salt should be an array whose elements are string, and the size is also 16, and it will encrypt ssl key with AES-128-CBC
# !!! So do not change it after saving your ssl, it can't decrypt the ssl keys have be saved if you change !!
# Only use the first key to encrypt, and decrypt in the order of the array.
#fallback_sni: "my.default.domain" # If set this, when the client doesn't send SNI during handshake, the fallback SNI will be used instead
enable_control: true
control:
ip: 127.0.0.1
port: 9092
disable_sync_configuration_during_start: false # safe exit. Remove this once the feature is stable
data_encryption: # add `encrypt_fields = { $field },` in plugin schema to enable encryption
enable: false # if not set, the default value is `false`.
keyring:
- qeddd145sfvddff3 # If not set, will save origin value into etcd.
# If set this, the keyring should be an array whose elements are string, and the size is also 16, and it will encrypt fields with AES-128-CBC
# !!! So do not change it after encryption, it can't decrypt the fields have be saved if you change !!
# Only use the first key to encrypt, and decrypt in the order of the array.
nginx_config: # config for render the template to generate nginx.conf
#user: root # specifies the execution user of the worker process.
# the "user" directive makes sense only if the master process runs with super-user privileges.
# if you're not root user,the default is current user.
error_log: logs/error.log
error_log_level: warn # warn,error
worker_processes: auto # if you want use multiple cores in container, you can inject the number of cpu as environment variable "APISIX_WORKER_PROCESSES"
enable_cpu_affinity: false # disable CPU affinity by default, if APISIX is deployed on a physical machine, it can be enabled and work well.
worker_rlimit_nofile: 20480 # the number of files a worker process can open, should be larger than worker_connections
worker_shutdown_timeout: 240s # timeout for a graceful shutdown of worker processes
max_pending_timers: 16384 # increase it if you see "too many pending timers" error
max_running_timers: 4096 # increase it if you see "lua_max_running_timers are not enough" error
event:
worker_connections: 10620
#envs: # allow to get a list of environment variables
# - TEST_ENV
meta:
lua_shared_dict:
prometheus-metrics: 15m
stream:
enable_access_log: false # enable access log or not, default false
access_log: logs/access_stream.log
access_log_format: "$remote_addr [$time_local] $protocol $status $bytes_sent $bytes_received $session_time"
# create your custom log format by visiting http://nginx.org/en/docs/varindex.html
access_log_format_escape: default # allows setting json or default characters escaping in variables
lua_shared_dict:
etcd-cluster-health-check-stream: 10m
lrucache-lock-stream: 10m
plugin-limit-conn-stream: 10m
worker-events-stream: 10m
tars-stream: 1m
# As user can add arbitrary configurations in the snippet,
# it is user's responsibility to check the configurations
# don't conflict with APISIX.
main_configuration_snippet: |
# Add custom Nginx main configuration to nginx.conf.
# The configuration should be well indented!
http_configuration_snippet: |
# Add custom Nginx http configuration to nginx.conf.
# The configuration should be well indented!
http_server_configuration_snippet: |
# Add custom Nginx http server configuration to nginx.conf.
# The configuration should be well indented!
http_server_location_configuration_snippet: |
# Add custom Nginx http server location configuration to nginx.conf.
# The configuration should be well indented!
http_admin_configuration_snippet: |
# Add custom Nginx admin server configuration to nginx.conf.
# The configuration should be well indented!
http_end_configuration_snippet: |
# Add custom Nginx http end configuration to nginx.conf.
# The configuration should be well indented!
stream_configuration_snippet: |
# Add custom Nginx stream configuration to nginx.conf.
# The configuration should be well indented!
http:
enable_access_log: true # enable access log or not, default true
access_log: logs/access.log
access_log_format: "$remote_addr - $remote_user [$time_local] $http_host \"$request\" $status $body_bytes_sent $request_time \"$http_referer\" \"$http_user_agent\" $upstream_addr $upstream_status $upstream_response_time \"$upstream_scheme://$upstream_host$upstream_uri\""
access_log_format_escape: default # allows setting json or default characters escaping in variables
keepalive_timeout: 60s # timeout during which a keep-alive client connection will stay open on the server side.
client_header_timeout: 60s # timeout for reading client request header, then 408 (Request Time-out) error is returned to the client
client_body_timeout: 60s # timeout for reading client request body, then 408 (Request Time-out) error is returned to the client
client_max_body_size: 0 # The maximum allowed size of the client request body.
# If exceeded, the 413 (Request Entity Too Large) error is returned to the client.
# Note that unlike Nginx, we don't limit the body size by default.
send_timeout: 10s # timeout for transmitting a response to the client.then the connection is closed
underscores_in_headers: "on" # default enables the use of underscores in client request header fields
real_ip_header: X-Real-IP # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
real_ip_recursive: "off" # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_recursive
real_ip_from: # http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
- 127.0.0.1
- "unix:"
#custom_lua_shared_dict: # add custom shared cache to nginx.conf
# ipc_shared_dict: 100m # custom shared cache, format: `cache-key: cache-size`
# Enables or disables passing of the server name through TLS Server Name Indication extension (SNI, RFC 6066)
# when establishing a connection with the proxied HTTPS server.
proxy_ssl_server_name: true
upstream:
keepalive: 320 # Sets the maximum number of idle keepalive connections to upstream servers that are preserved in the cache of each worker process.
# When this number is exceeded, the least recently used connections are closed.
keepalive_requests: 1000 # Sets the maximum number of requests that can be served through one keepalive connection.
# After the maximum number of requests is made, the connection is closed.
keepalive_timeout: 60s # Sets a timeout during which an idle keepalive connection to an upstream server will stay open.
charset: utf-8 # Adds the specified charset to the "Content-Type" response header field, see
# http://nginx.org/en/docs/http/ngx_http_charset_module.html#charset
variables_hash_max_size: 2048 # Sets the maximum size of the variables hash table.
lua_shared_dict:
internal-status: 10m
plugin-limit-req: 10m
plugin-limit-count: 10m
prometheus-metrics: 10m
plugin-limit-conn: 10m
upstream-healthcheck: 10m
worker-events: 10m
lrucache-lock: 10m
balancer-ewma: 10m
balancer-ewma-locks: 10m
balancer-ewma-last-touched-at: 10m
plugin-limit-count-redis-cluster-slot-lock: 1m
tracing_buffer: 10m
plugin-api-breaker: 10m
etcd-cluster-health-check: 10m
discovery: 1m
jwks: 1m
introspection: 10m
access-tokens: 1m
ext-plugin: 1m
tars: 1m
cas-auth: 10m
deployment:
role: control_plane
role_control_plane:
config_provider: etcd
conf_server:
listen: 0.0.0.0:9280
cert: /path/to/server.cer
cert_key: /path/to/server.key
client_ca_cert: /path/to/ca.cer
etcd:
host:
- http://svc-etcd.db.svc.cluster.local:2379
prefix: /apisix
timeout: 30
certs:
cert: /path/to/client.cer
cert_key: /path/to/client.key
trusted_ca_cert: /path/to/ca.cer
# certs:
# cert: /path/to/client.cer
# cert_key: /path/to/client.key
# trusted_ca_cert: /path/to/ca.cerapi response:
test domain:
after restarting data_plane
wanghaolonggit
commented
1 year ago Environment
- APISIX version (run
apisix version): 3.2.0- Operating system (run
uname -a): Linux phoenix-core-control-f66cdd9d6-64xk8 5.10.0-19-amd64 #1 SMP Debian 5.10.149-2 (2022-10-21) x86_64 GNU/Linux- OpenResty / Nginx version (run
openresty -Vornginx -V):nginx version: openresty/1.21.4.1- etcd version, if relevant (run
curl http://127.0.0.1:9090/v1/server_info):"etcdserver": "3.5.8", "etcdcluster": "3.5.0"- APISIX Dashboard version, if relevant:
- Plugin runner version, for issues related to plugin runners:
- LuaRocks version, for installation issues (run
luarocks --version): /usr/local/bin/luarocks 3.8.0
Revolyssup
commented
1 year ago @wanghaolonggit Do you have any relevant error logs before restarting when you get 404? And also access logs for the requests?
wanghaolonggit
commented
1 year ago I know the reason. It’s because we have a process that controls the desynchronization caused by restarting the data plane.
Description
Routing has been added to apisix control_plane. Data_plane cannot be read. You can get it by restarting data_plane. How to solve it?
Environment
apisix version):uname -a):openresty -Vornginx -V):curl http://127.0.0.1:9090/v1/server_info):luarocks --version):