search

aparcar / openwrt

Staging tree of Paul Spooren
Other
8 stars 1 forks source link

FS#1389 - TL-WR841n-V13 wireless issues #1190

Open aparcar opened 6 years ago

aparcar commented 6 years ago

mgiller:

Hi everyone

I'm using the router TL-WR841n-v13, it's only available on snapshot version. I'm using OpenWrt SNAPSHOT, r6302-0f54d96. Also i tried to compile the Git version.

The issue is that some devices have problems to connect to the wifi or need a few attemps to connect.

Sun Feb 25 17:42:59 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:43:08 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:43:08 2018 daemon.info hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: associated (aid 1) Sun Feb 25 17:43:08 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:71:de:10:33:56 Sun Feb 25 17:43:08 2018 daemon.info dnsmasq-dhcp[2197]: DHCPREQUEST(br-lan) 192.168.2.236 38:71:de:10:33:56 Sun Feb 25 17:43:08 2018 daemon.info dnsmasq-dhcp[2197]: DHCPACK(br-lan) 192.168.2.236 38:71:de:10:33:56 iPhone Sun Feb 25 17:43:53 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:43:55 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:43:58 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:44:01 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:44:06 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:44:07 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:44:10 2018 daemon.notice hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: did not acknowledge authentication response Sun Feb 25 17:44:10 2018 daemon.info hostapd: wlan0: STA 38:71:de:10:33:56 IEEE 802.11: associated (aid 1) Sun Feb 25 17:44:10 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:71:de:10:33:56 Sun Feb 25 17:44:11 2018 daemon.info dnsmasq-dhcp[2197]: DHCPREQUEST(br-lan) 192.168.2.236 38:71:de:10:33:56 Sun Feb 25 17:44:11 2018 daemon.info dnsmasq-dhcp[2197]: DHCPACK(br-lan) 192.168.2.236 38:71:de:10:33:56 iPhone

As you can see the device needs severals attemps to connect.

I was reading the bug report https://bugs.lede-project.org/index.php?do=details&task_id=34, it seems to be very similar. The latests version in Git have the patches already applied? Those patches works on this architecture?

I tried to apply the patch but i always got this error in the compile proces

Applying ./patches/354-ath9k-rename-tx_complete_work-to-hw_check_work.patch using plaintext: patching file drivers/net/wireless/ath/ath9k/ath9k.h Hunk #1 FAILED at 108. Hunk #2 FAILED at 745. Hunk #3 FAILED at 1053. 3 out of 3 hunks FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/ath9k.h.rej patching file drivers/net/wireless/ath/ath9k/init.c Hunk #1 FAILED at 681. 1 out of 1 hunk FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/init.c.rej patching file drivers/net/wireless/ath/ath9k/link.c Hunk #1 FAILED at 20. Hunk #2 FAILED at 41. 2 out of 2 hunks FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/link.c.rej patching file drivers/net/wireless/ath/ath9k/main.c Hunk #1 FAILED at 181. Hunk #2 FAILED at 198. Hunk #3 FAILED at 2091. Hunk #4 FAILED at 2129. 4 out of 4 hunks FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/main.c.rej patching file drivers/net/wireless/ath/ath9k/xmit.c patch unexpectedly ends in middle of line Hunk #1 FAILED at 2915. 1 out of 1 hunk FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/xmit.c.rej Patch failed! Please fix ./patches/354-ath9k-rename-tx_complete_work-to-hw_check_work.patch! Makefile:1843: recipe for target '/mnt/mgiller/lede-build_root/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/backports-2017-11-01/.prepared_0b3be554104662549e5b808709992a16_6664517399ebbbc92a37c5bb081b5c53' failed make[3]: [/mnt/mgiller/lede-build_root/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/backports-2017-11-01/.prepared_0b3be554104662549e5b808709992a16_6664517399ebbbc92a37c5bb081b5c53] Error 1 make[3]: Leaving directory '/mnt/mgiller/lede-build_root/source/package/kernel/mac80211' package/Makefile:106: recipe for target 'package/kernel/mac80211/compile' failed make[2]: [package/kernel/mac80211/compile] Error 2 make[2]: Leaving directory '/mnt/mgiller/lede-build_root/source' package/Makefile:102: recipe for target '/mnt/mgiller/lede-build_root/source/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile' failed make[1]: [/mnt/mgiller/lede-build_root/source/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2 make[1]: Leaving directory '/mnt/mgiller/lede-build_root/source' /mnt/mgiller/lede-build_root/source/include/toplevel.mk:216: recipe for target 'world' failed make: [world] Error 2

Another problem with this router is the wifi channel configuration, when i use channel "auto" it doesen't work. This is the log

Sun Feb 25 17:52:21 2018 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED Sun Feb 25 17:52:21 2018 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Feb 25 17:52:21 2018 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Feb 25 17:52:21 2018 daemon.notice netifd: Network device 'wlan0-1' link is down Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.474687] br-lanfree: port 1(wlan0-1) entered disabled state Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.485285] device wlan0-1 left promiscuous mode Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.490067] br-lanfree: port 1(wlan0-1) entered disabled state Sun Feb 25 17:52:21 2018 daemon.notice netifd: bridge 'br-lanfree' link is down Sun Feb 25 17:52:21 2018 daemon.notice netifd: Interface 'lanfree' has link connectivity loss Sun Feb 25 17:52:21 2018 daemon.notice netifd: Interface 'lanfree' is now down Sun Feb 25 17:52:21 2018 daemon.notice netifd: Interface 'lanfree' is disabled Sun Feb 25 17:52:21 2018 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-lanfree: No such device Sun Feb 25 17:52:21 2018 daemon.notice hostapd: wlan0: AP-DISABLED Sun Feb 25 17:52:21 2018 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Feb 25 17:52:21 2018 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.759987] device wlan0 left promiscuous mode Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.764608] br-lan: port 2(wlan0) entered disabled state Sun Feb 25 17:52:21 2018 daemon.notice netifd: Network device 'wlan0' link is down Sun Feb 25 17:52:21 2018 kern.info kernel: [ 851.820652] IPv6: ADDRCONF(NETDEV_UP): br-lanfree: link is not ready Sun Feb 25 17:52:22 2018 daemon.notice netifd: Interface 'lanfree' is enabled Sun Feb 25 17:52:22 2018 daemon.notice netifd: Interface 'lanfree' is setting up now Sun Feb 25 17:52:22 2018 daemon.notice netifd: Interface 'lanfree' is now up Sun Feb 25 17:52:22 2018 user.notice firewall: Reloading firewall due to ifup of lanfree (br-lanfree) Sun Feb 25 17:52:23 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.504142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.529438] br-lan: port 2(wlan0) entered blocking state Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.535068] br-lan: port 2(wlan0) entered disabled state Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.541054] device wlan0 entered promiscuous mode Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.545893] br-lan: port 2(wlan0) entered blocking state Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.551328] br-lan: port 2(wlan0) entered forwarding state Sun Feb 25 17:52:23 2018 kern.info kernel: [ 853.568193] br-lan: port 2(wlan0) entered disabled state Sun Feb 25 17:52:23 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun Feb 25 17:52:23 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit Sun Feb 25 17:52:23 2018 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS Sun Feb 25 17:52:23 2018 daemon.notice hostapd: wlan0: ACS-STARTED Sun Feb 25 17:52:24 2018 daemon.info dnsmasq[2197]: read /etc/hosts - 4 addresses Sun Feb 25 17:52:24 2018 daemon.info dnsmasq[2197]: read /tmp/hosts/dhcp.cfg01411c - 3 addresses Sun Feb 25 17:52:24 2018 daemon.info dnsmasq-dhcp[2197]: read /etc/ethers - 0 addresses Sun Feb 25 17:52:31 2018 daemon.err hostapd: ACS: Unable to collect survey data Sun Feb 25 17:52:31 2018 daemon.err hostapd: ACS: All study options have failed Sun Feb 25 17:52:31 2018 daemon.err hostapd: Interface initialization failed Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: interface state ACS->DISABLED Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: AP-DISABLED Sun Feb 25 17:52:31 2018 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file. Sun Feb 25 17:52:31 2018 daemon.err hostapd: ACS: Failed to start Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: AP-DISABLED Sun Feb 25 17:52:31 2018 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Sun Feb 25 17:52:31 2018 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Sun Feb 25 17:52:31 2018 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Feb 25 17:52:31 2018 kern.info kernel: [ 861.472251] device wlan0 left promiscuous mode Sun Feb 25 17:52:31 2018 kern.info kernel: [ 861.476960] br-lan: port 2(wlan0) entered disabled state Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Feb 25 17:52:31 2018 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: AP-DISABLED Sun Feb 25 17:52:31 2018 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Feb 25 17:52:31 2018 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Sun Feb 25 17:52:31 2018 daemon.notice netifd: radio0 (5677): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1632 path () Sun Feb 25 17:52:31 2018 kern.info kernel: [ 861.572639] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Feb 25 17:52:31 2018 daemon.notice netifd: radio0 (5677): ip: SIOCGIFFLAGS: No such device Sun Feb 25 17:52:31 2018 daemon.notice netifd: radio0 (5677): Interface 1 setup failed: IFUP_ERROR Sun Feb 25 17:52:34 2018 user.notice led: Connection available Sun Feb 25 17:52:42 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sun Feb 25 17:52:42 2018 kern.info kernel: [ 872.478706] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Feb 25 17:52:42 2018 kern.info kernel: [ 872.490938] br-lan: port 2(wlan0) entered blocking state Sun Feb 25 17:52:42 2018 kern.info kernel: [ 872.496622] br-lan: port 2(wlan0) entered disabled state Sun Feb 25 17:52:42 2018 kern.info kernel: [ 872.502554] device wlan0 entered promiscuous mode Sun Feb 25 17:52:42 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun Feb 25 17:52:42 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit Sun Feb 25 17:52:42 2018 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS Sun Feb 25 17:52:42 2018 daemon.notice hostapd: wlan0: ACS-STARTED

Boot log information

Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.000000] Linux version 4.9.82 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6291-3936616) ) #0 Sat Feb 24 15:12:57 2018 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Board has DDR2 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Analog PMU set to hw control Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Digital PMU set to hw control Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-WR841N v13 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Determined physical RAM map: Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd Sat Feb 24 15:42:39 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Sat Feb 24 15:42:39 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Zone ranges: Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Movable zone start for each node Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Early memory node ranges Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384 Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8042c8b4, node_mem_map 81000020 Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=0002e590 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=0002e590 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] Memory: 60180K/65536K available (3328K kernel code, 160K rwdata, 788K rodata, 196K init, 214K bss, 5356K reserved, 0K cma-reserved) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] NR_IRQS:256 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] intc: using register map from devicetree Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] CPU Clock: 580MHz Sat Feb 24 15:42:39 2018 kern.crit kernel: [ 0.000000] clocksource_probe: no matching clocksources found Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.007538] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.070056] pid_max: default: 32768 minimum: 301 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.074649] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.080990] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.094378] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.103871] futex hash table entries: 256 (order: -1, 3072 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.109805] pinctrl core: initialized pinctrl subsystem Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.116165] NET: Registered protocol family 16 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.141577] mt7621_gpio 10000600.gpio: registering 32 gpios Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.147299] mt7621_gpio 10000600.gpio: registering 32 gpios Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.152855] mt7621_gpio 10000600.gpio: registering 32 gpios Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.162541] clocksource: Switched to clocksource MIPS Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.168725] NET: Registered protocol family 2 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.173953] TCP established hash table entries: 1024 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.180647] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.186833] TCP: Hash tables configured (established 1024 bind 1024) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.193030] UDP hash table entries: 256 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.198631] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.204961] NET: Registered protocol family 1 Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 0.209136] PCI: CLS 0 bytes, default 32 Sat Feb 24 15:42:39 2018 kern.warn kernel: [ 0.212220] Crashlog allocated RAM at address 0x3f00000 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.218487] workingset: timestamp_bits=30 max_order=14 bucket_order=0 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.233706] squashfs: version 4.0 (2009/01/31) Phillip Lougher Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.239280] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.258244] io scheduler noop registered Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.261976] io scheduler deadline registered (default) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.267855] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.277514] console [ttyS0] disabled Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.280950] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.289727] console [ttyS0] enabled Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.296720] bootconsole [early0] disabled Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.306182] spi-mt7621 10000b00.spi: sys_freq: 193333333 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.326112] m25p80 spi32766.0: using chunked io (size=32) Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.331605] m25p80 spi32766.0: s25fl064k (8192 Kbytes) Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.336872] 4 ofpart partitions found on MTD device spi32766.0 Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.342799] Creating 4 MTD partitions on "spi32766.0": Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.348031] 0x000000000000-0x000000020000 : "boot" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.354629] 0x000000020000-0x0000007c0000 : "firmware" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.409677] 2 tplink-fw partitions found on MTD device firmware Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.415726] 0x000000020000-0x00000017bf82 : "kernel" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.422399] 0x00000017bf84-0x0000007c0000 : "rootfs" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.429316] mtd: device 3 (rootfs) set to be root filesystem Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.435670] 1 squashfs-split partitions found on MTD device rootfs Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.441957] 0x0000004c0000-0x0000007c0000 : "rootfs_data" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.449113] 0x0000007c0000-0x0000007d0000 : "config" Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 0.456109] 0x0000007d0000-0x000000800000 : "factory" Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.463823] libphy: Fixed MDIO Bus: probed Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.477020] rt3050-esw 10110000.esw: link changed 0x00 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.484907] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.494972] NET: Registered protocol family 10 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.502665] NET: Registered protocol family 17 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.507243] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.520395] 8021q: 802.1Q VLAN Support v1.8 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.537708] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Sat Feb 24 15:42:39 2018 kern.info kernel: [ 0.545989] Freeing unused kernel memory: 196K Sat Feb 24 15:42:39 2018 kern.warn kernel: [ 0.550496] This architecture does not have kernel memory protection. Sat Feb 24 15:42:39 2018 user.info kernel: [ 1.738778] init: Console is alive Sat Feb 24 15:42:39 2018 user.info kernel: [ 1.742456] init: - watchdog - Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 2.212552] random: fast init done Sat Feb 24 15:42:39 2018 user.info kernel: [ 3.778742] kmodloader: loading kernel modules from /etc/modules-boot.d/ Sat Feb 24 15:42:39 2018 kern.info kernel: [ 3.990946] usbcore: registered new interface driver usbfs Sat Feb 24 15:42:39 2018 kern.info kernel: [ 3.996710] usbcore: registered new interface driver hub Sat Feb 24 15:42:39 2018 kern.info kernel: [ 4.002204] usbcore: registered new device driver usb Sat Feb 24 15:42:39 2018 kern.info kernel: [ 4.013603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sat Feb 24 15:42:39 2018 kern.info kernel: [ 4.022121] ehci-platform: EHCI generic platform driver Sat Feb 24 15:42:39 2018 user.info kernel: [ 4.032782] kmodloader: done loading kernel modules from /etc/modules-boot.d/ Sat Feb 24 15:42:39 2018 user.info kernel: [ 4.041790] init: - preinit - Sat Feb 24 15:42:39 2018 kern.info kernel: [ 5.471487] rt3050-esw 10110000.esw: link changed 0x00 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 8.844888] rt3050-esw 10110000.esw: link changed 0x01 Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 8.918943] jffs2: notice: (354) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Sat Feb 24 15:42:39 2018 user.info kernel: [ 8.936992] mount_root: switching to jffs2 overlay Sat Feb 24 15:42:39 2018 user.warn kernel: [ 8.999423] urandom-seed: Seed file not found (/etc/urandom.seed) Sat Feb 24 15:42:39 2018 user.info kernel: [ 9.120387] procd: - early - Sat Feb 24 15:42:39 2018 user.info kernel: [ 9.124254] procd: - watchdog - Sat Feb 24 15:42:39 2018 user.info kernel: [ 9.711108] procd: - watchdog - Sat Feb 24 15:42:39 2018 user.info kernel: [ 9.714637] procd: - ubus - Sat Feb 24 15:42:39 2018 user.info kernel: [ 9.860378] procd: - init - Sat Feb 24 15:42:39 2018 user.info kernel: [ 10.441522] kmodloader: loading kernel modules from /etc/modules.d/ Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.546554] ip6_tables: (C) 2000-2006 Netfilter Core Team Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.562939] Netfilter messages via NETLINK v0.30. Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.570949] ip_set: protocol 6 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.624896] u32 classifier Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.627652] input device check on Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.631358] Actions configured Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.637834] Mirror/redirect action on Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.816137] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) Sat Feb 24 15:42:39 2018 kern.notice kernel: [ 10.829980] Bridge firewalling registered Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.836244] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.844437] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d Sat Feb 24 15:42:39 2018 kern.info kernel: [ 10.855699] ip_tables: (C) 2000-2006 Netfilter Core Team Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.078289] xt_time: kernel timezone is -0000 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.197613] mt76_wmac 10300000.wmac: ASIC revision: 76280001 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.208400] mt76_wmac 10300000.wmac: Firmware Version: _e2_mp Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.214334] mt76_wmac 10300000.wmac: Build Time: 20150211175503 Sat Feb 24 15:42:39 2018 kern.warn kernel: [ 11.232541] firmware init done Sat Feb 24 15:42:39 2018 kern.debug kernel: [ 11.399014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.430112] PPP generic driver version 2.4.2 Sat Feb 24 15:42:39 2018 kern.info kernel: [ 11.446558] NET: Registered protocol family 24 Sat Feb 24 15:42:39 2018 user.info kernel: [ 11.571831] kmodloader: done loading kernel modules from /etc/modules.d/ Sat Feb 24 15:42:40 2018 kern.info kernel: [ 14.779709] rt3050-esw 10110000.esw: link changed 0x00 Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: tunnel Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: Network device Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: bridge Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: veth Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: macvlan Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: 8021ad Sat Feb 24 15:42:41 2018 user.notice : Added device handler type: 8021q Sat Feb 24 15:42:42 2018 cron.info crond[867]: crond (busybox 1.27.2) started, log level 8 Sat Feb 24 15:42:43 2018 authpriv.info dropbear[900]: Not backgrounding Sat Feb 24 15:42:43 2018 kern.info kernel: [ 18.150107] rt3050-esw 10110000.esw: link changed 0x01 Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.015586] br-lan: port 1(eth0.1) entered blocking state Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.021079] br-lan: port 1(eth0.1) entered disabled state Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.027088] device eth0.1 entered promiscuous mode Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.031953] device eth0 entered promiscuous mode Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.061117] br-lan: port 1(eth0.1) entered blocking state Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.066667] br-lan: port 1(eth0.1) entered forwarding state Sat Feb 24 15:42:46 2018 kern.info kernel: [ 21.072569] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready Sat Feb 24 15:42:46 2018 daemon.notice netifd: Interface 'lan' is enabled Sat Feb 24 15:42:46 2018 daemon.notice netifd: Interface 'lan' is setting up now Sat Feb 24 15:42:46 2018 daemon.notice netifd: Interface 'lan' is now up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'admin' is enabled Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'admin' is setting up now Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'admin' is now up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'loopback' is enabled Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'loopback' is setting up now Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'loopback' is now up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'wan' is enabled Sat Feb 24 15:42:47 2018 kern.info kernel: [ 21.432180] IPv6: ADDRCONF(NETDEV_UP): br-lanfree: link is not ready Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'lanfree' is enabled Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'lanfree' is setting up now Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'lanfree' is now up Sat Feb 24 15:42:47 2018 daemon.notice netifd: bridge 'br-lan' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'lan' has link connectivity Sat Feb 24 15:42:47 2018 daemon.notice netifd: Network device 'eth0' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: VLAN 'eth0.1' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: VLAN 'eth0.3' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'admin' has link connectivity Sat Feb 24 15:42:47 2018 daemon.notice netifd: Network device 'lo' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'loopback' has link connectivity Sat Feb 24 15:42:47 2018 daemon.notice netifd: VLAN 'eth0.2' link is up Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'wan' has link connectivity Sat Feb 24 15:42:47 2018 daemon.notice netifd: Interface 'wan' is setting up now Sat Feb 24 15:42:47 2018 daemon.notice netifd: wan (1212): udhcpc: started, v1.27.2 Sat Feb 24 15:42:47 2018 kern.info kernel: [ 22.030028] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready Sat Feb 24 15:42:48 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Sat Feb 24 15:42:48 2018 daemon.notice netifd: wan (1212): udhcpc: sending discover Sat Feb 24 15:42:48 2018 daemon.notice netifd: wan (1212): udhcpc: sending select for 192.168.1.7 Sat Feb 24 15:42:48 2018 daemon.notice netifd: wan (1212): udhcpc: lease of 192.168.1.7 obtained, lease time 86400 Sat Feb 24 15:42:48 2018 daemon.notice netifd: Interface 'wan' is now up Sat Feb 24 15:42:49 2018 user.notice firewall: Reloading firewall due to ifup of lanfree (br-lanfree) Sat Feb 24 15:42:50 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2) Sat Feb 24 15:42:51 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.382956] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.397174] br-lan: port 2(wlan0) entered blocking state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.402673] br-lan: port 2(wlan0) entered disabled state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.408510] device wlan0 entered promiscuous mode Sat Feb 24 15:42:51 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sat Feb 24 15:42:51 2018 daemon.err hostapd: Using interface wlan0 with hwaddr c0:25:e9:b1:48:b6 and ssid "Portal" Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.448746] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.455484] br-lan: port 2(wlan0) entered blocking state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.460901] br-lan: port 2(wlan0) entered forwarding state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.473557] br-lanfree: port 1(wlan0-1) entered blocking state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.479592] br-lanfree: port 1(wlan0-1) entered disabled state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.486189] device wlan0-1 entered promiscuous mode Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.602634] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.608836] br-lanfree: port 1(wlan0-1) entered blocking state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.614773] br-lanfree: port 1(wlan0-1) entered forwarding state Sat Feb 24 15:42:51 2018 kern.info kernel: [ 25.621709] IPv6: ADDRCONF(NETDEV_CHANGE): br-lanfree: link becomes ready Sat Feb 24 15:42:51 2018 daemon.notice netifd: bridge 'br-lanfree' link is up Sat Feb 24 15:42:51 2018 daemon.notice netifd: Interface 'lanfree' has link connectivity

Thanks

aparcar commented 6 years ago

nozombian:

I second this, the wifi is unusable on this device. Wifi clients needs to have full signal, otherwise they fail to connect. There's a [[https://forum.openwrt.org/viewtopic.php?id=70687&p=3|thread in forum]].

aparcar commented 6 years ago

BlackLionPT:

Also second this. Ethernet connections seem to be very stable, however wifi is completly unstable. This is especialy agravated the further away you are from the router, the connection will drop a lot.