-
To ease programming the UI it would be really nice if a virtual serial port could be used. When the programmer has no access to their boardswarm instance they could still set up a "fake" instance for …
-
Also, remove the `PrintChar` rudder statement
-
Hello Collin, would this run on ESP-32 Dev Kit C V4? Does anything else need to be changed? The data comes via 'USB serial port' ??
Nice greetings from Germany[
![Screenshot 2024-04-25 at 21-50-49 E…
-
I'm writing a program to communicate with an Arduino over a serial port. Immediately after flashing the Arduino or plugging it into a computer my Rust code doesn't actually open the serial port. The c…
-
Despite disabling the console using raspi-config, getty still takes control of both ttyS0 and ttyAMA0.
Version:
Raspberry Pi OS with desktop
Release date: March 15th 2024
System: 64-bit
Kerne…
ZL4JY updated
3 weeks ago
-
Hello! I'm a bit new when it comes to visual studio but when trying to connect my KMBox i get the following message printed
"Serial handle: -1"
"Failed to open serial port"
I've updated the por…
sihx6 updated
1 month ago
-
Arduino 8E1 format is 8 bits of data, one even check, one stop, a total of 10 bits of data.
The traditional CH32 and STM32 are 7-bit data one-bit check, so there is one less.
To solve this problem…
4061N updated
1 month ago
-
Hello,
I'm fairly sure I'm doing this correctly but I am unable to open the serial connection to flash a CB3S with OBK.
I am using this USB to TTL module
https://www.aliexpress.us/item/3256805987…
-
```use panic_halt as ;
use arduino_hal::I2c;
use bme280_rs::{Bme280, Configuration, Oversampling, SensorMode};
use fixed::types::U16F16;
use micromath::F32Ext;
use ufmt::{uDisplay, uWrite};
#[…
-
While looking into #201, I found a wrong serial number '5' reported for a FTDI 2232D which does not have a serial number (due to not having an external EEPROM fitted):
```
>cargo run --example lis…