jimenofonseca
commented
5 years ago Hi @justinfmccarty would you mind trying our new all-in-one-step installer? #1908
Let us know if this works for you!
Closed justinfmccarty closed 5 years ago
jimenofonseca
commented
5 years ago Hi @justinfmccarty would you mind trying our new all-in-one-step installer? #1908
Let us know if this works for you!
justinfmccarty
commented
5 years ago @JIMENOFONSECA, the installer seems to have worked. About 20 minutes with the developer option checked. I was able to launch the dashboard (looking great) and migrate to the project we have created for one of our Vancouver test zones. The geometry appeared and everything looked right. There was an error when I launched the dashboard though:
City Energy Analyst version 2.12.0a1
Running `cea dashboard` with the following parameters:
* Serving Flask app "cea.interfaces.dashboard.dashboard" (lazy loading)
* Environment: production
WARNING: Do not use the development server in a production environment.
Use a production WSGI server instead.
* Debug mode: on
* Restarting with stat
City Energy Analyst version 2.12.0a1
Running `cea dashboard` with the following parameters:
* Debugger is active!
* Debugger PIN: 150-575-982
* Running on http://localhost:5050/ (Press CTRL+C to quit)I had to manually open http://localhost:5050 as well. But, nothing seems to be out of place. I will dig more into it tomorrow.
Thank you for passing that along!
justinfmccarty
commented
5 years ago I have been able to work from the new installer on the reference case. I tried to use our own project but was thwarted when running radiation_main.py. Error below, but I think you all already know about it:
C:\CityEnergyAnalyst\Dependencies\Python\python.exe C:/CityEnergyAnalyst/CityEnergyAnalyst/cea/resources/radiation_daysim/radiation_main.py
DEBUG:shapely.geos:Trying `CDLL(C:\CityEnergyAnalyst\Dependencies\Python\Library\bin\geos_c.dll)`
DEBUG:shapely.geos:Library path: 'C:\\CityEnergyAnalyst\\Dependencies\\Python\\Library\\bin\\geos_c.dll'
DEBUG:shapely.geos:DLL: <CDLL 'C:\CityEnergyAnalyst\Dependencies\Python\Library\bin\geos_c.dll', handle 9d2d0000 at c930588>
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
verifying geometry files
C:\CityEnergyAnalyst\CityEnergyAnalyst\reference-case-open\baseline\inputs\building-geometry\zone.shp
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Projection not found (cogr_crs was NULL)
DEBUG:Fiona:Projection not found (cogr_crs was NULL)
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
creating 3D geometry and surfaces
Reading terrain geometry
Creating 3D building surfaces
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Got coordinate system
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
DEBUG:fiona:Creating a not-responsible GDALEnv in drivers()
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
WARNING:Fiona:GDAL data files not located, GDAL_DATA not set
WARNING:Fiona:PROJ data files not located, PROJ_LIB not set
DEBUG:Fiona:Projection not found (cogr_crs was NULL)
DEBUG:Fiona:Projection not found (cogr_crs was NULL)
DEBUG:Fiona:Index: 0
DEBUG:fiona.collection:Flushed buffer
DEBUG:fiona.collection:Stopped session
Generating geometry for building B10
burning building B10
Generating geometry for building B11
burning building B11
Generating geometry for building B12
burning building B12
Generating geometry for building B13
burning building B13
Generating geometry for building B14
burning building B14
Generating geometry for building B15
burning building B15
Generating geometry for building B16
burning building B16
Generating geometry for building B01
burning building B01
Generating geometry for building B02
burning building B02
Generating geometry for building B03
burning building B03
Generating geometry for building B04
burning building B04
Generating geometry for building B05
burning building B05
Generating geometry for building B06
burning building B06
Generating geometry for building B07
burning building B07
Generating geometry for building B08
burning building B08
Generating geometry for building B09
burning building B09
Sending the scene: geometry and materials to daysim
radiation_main: rad.base_file_path: c:\users\justi\appdata\local\temp\default_materials.rad
radiation_main: rad.data_folder_path: c:\users\justi\appdata\local\temp
radiation_main: rad.command_file: c:\users\justi\appdata\local\temp\command.txt
radiation_main: rad.rad_file_path: c:\users\justi\appdata\local\temp\geometry.rad
isolation_daysim: daysim_dir=c:\users\justi\appdata\local\temp\temp0
isolation_daysim: rad.hea_file: c:\users\justi\appdata\local\temp\temp0\temp0.hea
isolation_daysim: rad.hea_filename: None
isolation_daysim: rad.daysimdir_ies: c:\users\justi\appdata\local\temp\temp0\ies
isolation_daysim: rad.daysimdir_pts: c:\users\justi\appdata\local\temp\temp0\pts
isolation_daysim: rad.daysimdir_rad: c:\users\justi\appdata\local\temp\temp0\rad
isolation_daysim: rad.daysimdir_res: c:\users\justi\appdata\local\temp\temp0\res
isolation_daysim: rad.daysimdir_tmp: c:\users\justi\appdata\local\temp\temp0\tmp
isolation_daysim: rad.daysimdir_wea: c:\users\justi\appdata\local\temp\temp0\wea
Calculating and sending sensor points
isolation_daysim: rad.sensor_file_path: c:\users\justi\appdata\local\temp\points_0.pts
Starting Daysim simulation starts for buildings [u'B01', u'B02', u'B03', u'B04', u'B05', u'B06', u'B07', u'B08', u'B09']
Total number of sensors: 2349
Executing epw2wea
Executing radfiles2daysim
Writing radiance parameters
Executing gen_dc
'C:\CityEnergyAnalyst\Dependencies\Daysim\oconv' is not recognized as an internal or external command,
operable program or batch file.
=======================================================
rtrace_dc: fatal - (c:\users\justi\appdata\local\temp\temp0\tmp\/static_system.dir.oct): not an octree
= gen_dc: calculate direct daylight coefficients =
= (this simulation may take several minutes to hours) =
=======================================================
calculate 65 direct daylight coefficients for variant static_system...
'C:\CityEnergyAnalyst\Dependencies\Daysim\oconv' is not recognized as an internal or external command,
operable program or batch file.
rtrace_dc: fatal - (c:\users\justi\appdata\local\temp\temp0\tmp\/static_system.dif.oct): not an octree
=======================================================
= gen_dc: calculate diffuse daylight coefficients =
= (ignore WARNING: no light sources found) =
= (this simulation may take several minutes to hours) =
=======================================================
calculate diffuse daylight coefficients for variant static_system...
Executing ds_illum
ds_illum: fatal error: File c:\users\justi\appdata\local\temp\temp0\res\temp0.dc does not contain any uncommented lines.
IN CASE YOU ARE USING DAYSIM UNDER WINDOWS, THE "RAPYPATH" VARIALBE MIGHT NOT HAVE BEEN SET CORRECTLY. TO TEST THIS, OPEN A DOS PROMPT AND TYPE 'set'. AMONG THE VARIALBLES DISPLAYED SHOULD BE 'Raypath c:\Daysim\lib'.
PLEASE REFER TO THE DAYSIM TUTORIAL FOR MORE INFORMATION...Evaluating illumination per sensor
Traceback (most recent call last):
File "C:/CityEnergyAnalyst/CityEnergyAnalyst/cea/resources/radiation_daysim/radiation_main.py", line 219, in <module>
main(cea.config.Configuration())
File "C:/CityEnergyAnalyst/CityEnergyAnalyst/cea/resources/radiation_daysim/radiation_main.py", line 214, in main
radiation_singleprocessing(rad, geometry_3D_zone, locator, config.weather, settings)
File "C:/CityEnergyAnalyst/CityEnergyAnalyst/cea/resources/radiation_daysim/radiation_main.py", line 165, in radiation_singleprocessing
daysim_main.isolation_daysim(chunk_n, rad, building_dict, locator, weather_path, settings)
File "C:\CityEnergyAnalyst\CityEnergyAnalyst\cea\resources\radiation_daysim\daysim_main.py", line 173, in isolation_daysim
solar_res = rad.eval_ill_per_sensor()
File "C:\CityEnergyAnalyst\Dependencies\Python\lib\site-packages\py4design\py2radiance\__init__.py", line 1158, in eval_ill_per_sensor
res_dict_list = self.eval_ill()
File "C:\CityEnergyAnalyst\Dependencies\Python\lib\site-packages\py4design\py2radiance\__init__.py", line 1130, in eval_ill
ill_file = open(ill_path, "r")
IOError: [Errno 2] No such file or directory: 'c:\\users\\justi\\appdata\\local\\temp\\temp0\\res\\temp0.ill'
Process finished with exit code 1
I made it through the intial demand and network layout calulcations with the reference case, but was faced with another error during decentralized_building_main. #1825 - Same ValueError: cannot convert float NaN to integer Is there a fix for this that I missed in 1825?
jimenofonseca
commented
5 years ago @daren-thomas any clue about what might be the problem?
justinfmccarty
commented
5 years ago @JIMENOFONSECA @daren-thomas I seem to have worked past it. I removed the CEA install and my C:\Daysim installation two days ago and then installed the CEA using the installer. When running radiation_main I ended with the error IOError: [Errno 2] No such file or directory: 'c:\\users\\justi\\appdata\\local\\temp\\temp0\\wea\\Zug_60min.wea'. I read in some issue in the log that this was a result of no RAYPATH or PATH variables. I checked my variables and there was nothing from Daysim or Radiance. So I added C:\Users\justi\CityEnergyAnalyst\Dependencies\ to PATH and RAYPATH.
This got me past the no .wea error but brought on IOError: [Errno 2] No such file or directory: 'c:\\users\\justi\\appdata\\local\\temp\\temp0\\res\\temp0.ill'. In my Daysim Dependencies there were only four .exe's were .ds_illum, .epw2wea, .radfiles2daysim, .rtrace_dc. I added .oconv, and .gen_dc. This led to an error about some missing .cal's so I dropped those all in as well. Works now. I have not reinstalled Daysim to C:\ yet.
daren-thomas
commented
5 years ago Newer versions of the installer (still under development) solve this. Try this one: https://www.dropbox.com/s/iavdblwizr9x9v0/Setup_CityEnergyAnalyst_2.13.exe?dl=0
The CEA console provided there has the RAYPATH variable set and I added some missing Daysim binaries. Does this help?
justinfmccarty
commented
5 years ago @daren-thomas Installed and works great inside of the console.
jimenofonseca
commented
5 years ago @daren-thomas I just installed it, but using the link in the github repository, The last release 2.13. It does not work on my computer. Is by any chance this file in the dropboxlink different than that one in github?
Following the comments of justin, it seems the installer did not get all the daysim binaries:
daren-thomas
commented
5 years ago @JIMENOFONSECA yes, the dropbox link is newer. Here's the newest version I'm working with. It runs radiation-daysim from the cea console: https://www.dropbox.com/s/upxsegqkcf1c716/Setup_CityEnergyAnalyst_2.13.3.exe?dl=0
I'm still working on getting the Dashboard to run through (some setting of environment variables required).
Not all Daysim binaries are included. Only the ones we actually use. But a few more than shown in your screenshot above.
jimenofonseca
commented
5 years ago Got, it. Is it possible to reemplaze this installer cersion with the one in github releases? Just because people download the tool almost every day..and it would be good to give them the most updated version...
Dr. Jimeno A. Fonseca Senior researcher and project coordinator Future cities Laboratory Singapore ETH-Centre
Chair of Architecure and Building Systems ETH Zurich
On 8 May 2019, 15:52 +0800, Daren Thomas notifications@github.com, wrote:
@JIMENOFONSECAhttps://github.com/JIMENOFONSECA yes, the dropbox link is newer. Here's the newest version I'm working with. It runs radiation-daysim from the cea console: https://www.dropbox.com/s/upxsegqkcf1c716/Setup_CityEnergyAnalyst_2.13.3.exe?dl=0
I'm still working on getting the Dashboard to run through (some setting of environment variables required).
Not all Daysim binaries are included. Only the ones we actually use. But a few more than shown in your screenshot above.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/architecture-building-systems/CityEnergyAnalyst/issues/1909#issuecomment-490386639, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACEOXAXVRH3Y7MKTR2YVHPLPUKBCDANCNFSM4HIIJEBA.
daren-thomas
commented
5 years ago I don't know yet, BUT: I did create a PR with the updated installer. Let's merge that and create a new release (2.13.5). That would solve that problem, no?
daren-thomas
commented
5 years ago @JIMENOFONSECA correction: yes. it's possible. done.
Hello there,
I am attempting to install CEA following steps 1-10 with fresh Pycharm, cloned repository, fresh Daysim 4.0, but have been hung up on this error:
Following this I have tried to continue in the process:
Any advice would be greatly appreciated.