Data for Energy Conversion/Storage technologies

[ChrisZenhub]

acquire and compile relevant data of energy conversion and storage technologies

• embodied emissions (per kW capacity)
• operational emissions (per kWh of an energy carrier. E.g. 0.5 kgCO2/kWheq. natural gas)
• conversion efficiencies (gas to heat, gas to elec, ...)
• storage losses
• investment cost (per kW capacity)
• lifetime
• any other relevant data for HIVE

[christophwaibel]

@hillias @Linwal for air source heat pumps and chillers, could you give me some values for eta for this eqt. from the lectures?: COP_W = eta ( T_1 / (T_1 - T_2))

and a linear cost coefficient CHF/kW capacity for the respective air source heat pump / chiller.

For a natural gas boiler, as well as a micro CHP, I'd also need efficiency (for CHP, electric eff. and heat-to-power ratio), and cost CHF/kW (for CHP, ideally CHF/kW_electric)

I'm missing this information in #363

[Linwal]

@hillias @Linwal for air source heat pumps and chillers, could you give me some values for eta for this eqt. from the lectures?: COP_W = eta ( T_1 / (T_1 - T_2))

and a linear cost coefficient CHF/kW capacity for the respective air source heat pump / chiller.

For a natural gas boiler, as well as a micro CHP, I'd also need efficiency (for CHP, electric eff. and heat-to-power ratio), and cost CHF/kW (for CHP, ideally CHF/kW_electric)

I'm missing this information in #363

@christophwaibel is there already a file for this, how would you like to have this data?

[Linwal]

https://systems.sp.ethz.ch/_layouts/15/WopiFrame2.aspx?sourcedoc={3104D32E-7BBB-46AB-9411-632F7C454D39}&file=AS_BuildingSystem_Data.xlsx&action=default

We further started this document on the sharepoint. Here I would like to make sure that we always include sources and units directly in the document.