Open ivizot opened 3 years ago
Memory usage change @ 3cd7ccae19c5a71b9a2c66bd4fd8815443efbff5
Board | flash | % | RAM for global variables | % |
---|---|---|---|---|
arduino:avr:leonardo | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:mega | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:nano | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:nona4809 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:uno2018 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:sam:arduino_due_x_dbg | 0 - 0 | 0.0 - 0.0 | N/A | N/A |
arduino:samd:arduino_zero_edbg | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkr1000 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrfox1200 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrgsm1400 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrnb1500 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrvidor4000 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1300 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1310 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwifi1010 | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrzero | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:nano_33_iot | 0 - 0 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
I am using Ethernet chips like W5*00 a lot in an industrial applications, where the galvanic isolation of the controller is essential. Sometimes the isolation driver can only go 1Mbps fast (e.g. adum1401), which makes it impossible to connect W5x00 to the Atmega chip. Suggested minor change allows for explicit selection of the SPI speed with #define SPI_ETHERNET_SPEED directive.
Partially resolves #<!---->267