Open hansu opened 10 months ago
Memory usage change @ 064a37ded464c4fb809daf2643277db19b42e88f
Board | flash | % | RAM for global variables | % |
---|---|---|---|---|
arduino:avr:leonardo |
:small_red_triangle: 0 - +10 | 0.0 - +0.03 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:mega |
:small_red_triangle: 0 - +6 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:avr:nano |
:small_red_triangle: 0 - +8 | 0.0 - +0.03 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:nona4809 |
:small_red_triangle: 0 - +20 | 0.0 - +0.04 | 0 - 0 | 0.0 - 0.0 |
arduino:megaavr:uno2018 |
:small_red_triangle: 0 - +20 | 0.0 - +0.04 | 0 - 0 | 0.0 - 0.0 |
arduino:sam:arduino_due_x_dbg |
0 - 0 | 0.0 - 0.0 | N/A | N/A |
arduino:samd:arduino_zero_edbg |
:small_red_triangle: 0 - +8 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkr1000 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrfox1200 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrgsm1400 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrnb1500 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrvidor4000 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1300 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwan1310 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrwifi1010 |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:mkrzero |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
arduino:samd:nano_33_iot |
:small_red_triangle: 0 - +4 | 0.0 - 0.0 | 0 - 0 | 0.0 - 0.0 |
Is there anything that keep this PR from being merged?
Error message about not present Ethernet hardware was only printed if mac==0, which makes not really sense: