search

arduino / ArduinoCore-arc32

GNU Lesser General Public License v2.1
329 stars 284 forks source link

Arduino 101 / Arduino 101 stuck after uploading code #565

Open tamirmha opened 7 years ago

tamirmha commented 7 years ago

have an arduino 101 and after i added to my project an EEPROM Get/Put its worked for 1 minute and after this the device stucked and didn't response anymore and the computer doesnt recognize it any more ( i disconnected from the usb, tried the master reset, tried to downgrade for older version the ide and the drivers). i tried before to write the only to the eeprom and its worked fine i have win7 64bit and the latest version of the ide and the intel curie drivers) the device is like a brick now I attached the code. Hope if anyone could help BLE_Arduino1.zip

bigdinotech commented 7 years ago

Hi @tamirmha , Can you try to reflash the firmware. Tools-> Burn Bootloader Make sure that the programmer selected is Arduino/Genuino 101 Firmware Updater"

tamirmha commented 7 years ago

Hello Bigdinotech, the computer doesn't recognize the device any more and the port didn't appear also. i tried this and its didnt work. its give the following message: "Starting download script... Flashing is taking longer than expected Try pressing MASTER_RESET button ERROR: Timed out waiting for Arduino 101 on COM7 Error while burning bootloader."

IeiuniumLux commented 4 years ago

Will this ever be fixed?

PaulStoffregen commented 4 years ago

Who do you imagine will work on this problem?

Intel discontinued the chip. Arduino no longer sells this board. Intel reassigned or laid off all the developers who worked on the software.

Seems extremely unlikely any lingering issues with Arduino 101 or Intel Curie will ever be fixed.

AmanuelEphrem commented 4 years ago

If you are having uploading issues, I have a fix that helped me. Upload your code to your board and press the master reset every 3-4 seconds. I know it is jankey, but it worked for me :)

Rafmigz commented 3 years ago

Hi! I also have an Arduino 101 when I upload a code, the Arduino will have a sound of disconnecting USB and connecting sound, until an error will appear: "ERROR: Timed out waiting for Arduino 101 on COM6" is there a fix on this? Thanks!

eriknyquist commented 3 years ago

@Rafmigz @IeiuniumLux @tamirmha

My apologies for never responding to this thread-- I had these emails tucked away in an old gmail filter because, well, I don't work at Intel anymore, as Paul said :P

Everything @PaulStoffregen said is correct, and because of this I think it is very unlikely that any further development or bug fixing will happen for this repository. This is only speculation of course, since I don't work at Intel anymore (and this should by no means be considered to be any kind of official statement), but it seems like a safe bet given the lack of recent activity on this repository.

Thanks, and good luck. Erik

Rafmigz commented 3 years ago

Hi! I was really persistent to look for ways on how to fix the Arduino/Genuino 101 Timeout Error, I searched different threads and read a lot of suggestions on how to fix the error, but still all failed, I know some of the 101 users already bricked their 101 or other just left it behind.

We are all aware that the Arduino 101 is already discontinued and even support is already stopped, Hence this little but powerful microcontroller is still out there and probably used by the some. Anyhow, to be straight to the point I finally I discovered the fix for the error.

Notice that when you insert your 101 to the USB plug it will read and install the device, checking it in the device manager will show the Arduino/Genuino 101 in "Other Devices" and a new COMPort (COMX) is added, then you install the Arduino IDE (regardless of the version), then install the Arduino 101 Board thru "Board Manager", the manager will install the Arduino 101 but it will not notify you that the driver for Arduino 101 is not installed due to error. So in short we are assuming that the driver for Arduino 101 is successfully installed. This is where the error lies. The software driver "dpinst-amd64" is not digitally signed and Windows is blocking to install unsigned drivers.

So what's the fix?

The fix here is still to install the "dpinst-amd64" since it is the driver needed to recognize your 101, the trick here is you need to install it in other way, not in your regular PC operation. You need to access the "disable signature enforcement" under the startup options (not safe mode). This startup mode will enable you to install unsigned drivers (I trust this Intel Curie driver since it was downloaded with the board). After installation restart your PC to its regular startup and plug-in again your Arduino/Genuino 101, this time the PC will now recognize the microcontroller and you can now upload sketches without the time out error.

I hope this will help. :D I will try to make a video about this fix. :D

Thanks!

Regards,

Raf

Shlumpith commented 3 years ago

I tried to use the solution Rafmigz was able to find. When I ran the driver setup wizard it was able to install the intel drivers but not the libusb drivers. I still cant upload code to the board yet, as it will still wait on the device. Any ideas on how to fix this? image ^ image of the dipnst-amd64 driver installer failing, before I did the windows signature thing it wasn't able to install any of the drivers.

Rafmigz commented 3 years ago

Hmmm, seems another problem, try to do it in other computer, as I tried mine for 4 computers and everything seems to work well with the fix.

or try to re install the driver again.

Thanks!

Rafmigz

Syntrice commented 3 years ago

Hi! I was really persistent to look for ways on how to fix the Arduino/Genuino 101 Timeout Error, I searched different threads and read a lot of suggestions on how to fix the error, but still all failed, I know some of the 101 users already bricked their 101 or other just left it behind.

We are all aware that the Arduino 101 is already discontinued and even support is already stopped, Hence this little but powerful microcontroller is still out there and probably used by the some. Anyhow, to be straight to the point I finally I discovered the fix for the error.

Notice that when you insert your 101 to the USB plug it will read and install the device, checking it in the device manager will show the Arduino/Genuino 101 in "Other Devices" and a new COMPort (COMX) is added, then you install the Arduino IDE (regardless of the version), then install the Arduino 101 Board thru "Board Manager", the manager will install the Arduino 101 but it will not notify you that the driver for Arduino 101 is not installed due to error. So in short we are assuming that the driver for Arduino 101 is successfully installed. This is where the error lies. The software driver "dpinst-amd64" is not digitally signed and Windows is blocking to install unsigned drivers.

So what's the fix?

The fix here is still to install the "dpinst-amd64" since it is the driver needed to recognize your 101, the trick here is you need to install it in other way, not in your regular PC operation. You need to access the "disable signature enforcement" under the startup options (not safe mode). This startup mode will enable you to install unsigned drivers (I trust this Intel Curie driver since it was downloaded with the board). After installation restart your PC to its regular startup and plug-in again your Arduino/Genuino 101, this time the PC will now recognize the microcontroller and you can now upload sketches without the time out error.

I hope this will help. :D I will try to make a video about this fix. :D

Thanks!

Regards,

Raf

I can confirm this worked for me. Finally glad to have a fix!

Yasu31 commented 3 years ago

@Rafmigz 's solution worked, thank you! Leaving a step-by-step memo of how I resolved it, for future reference...

  1. disconnect the Arduino 101 if it is connected (not sure if this is necessary, but just in case to prevent if Windows decides to automatically install drivers)
  2. uninstall the Intel Curie Boards from the Arduino Boards Manager
  3. restart Windows into the boot options menu. I used the shutdown.exe /r /o command from Windows Powershell as Admin (ref: https://www.howtogeek.com/126016/three-ways-to-access-the-windows-8-boot-options-menu/ )
  4. In the boot options menu, choose Troubleshoot -> Advanced Options -> Restart
  5. After restart, choose Disable driver signature enforcement
  6. Install Intel Curie Boards again, from the Arduino Boards Manager
wengweng675 commented 3 years ago

@Rafmigz 's solution worked, thank you! Leaving a step-by-step memo of how I resolved it, for future reference...

  1. disconnect the Arduino 101 if it is connected (not sure if this is necessary, but just in case to prevent if Windows decides to automatically install drivers)
  2. uninstall the Intel Curie Boards from the Arduino Boards Manager
  3. restart Windows into the boot options menu. I used the shutdown.exe /r /o command from Windows Powershell as Admin (ref: https://www.howtogeek.com/126016/three-ways-to-access-the-windows-8-boot-options-menu/ )
  4. In the boot options menu, choose Troubleshoot -> Advanced Options -> Restart
  5. After restart, choose Disable driver signature enforcement
  6. Install Intel Curie Boards again, from the Arduino Boards Manager

how to uninstall the intel curie board

PaulStoffregen commented 3 years ago

@per1234 - Perhaps the Arduino 101 retired product page should be updated with a link to this github issue?

https://github.com/arduino/Arduino

The "Getting Started" section on the Overview tab seems like an ideal place to mention how Windows users should install the unsigned driver.