Closed sam-peach closed 1 year ago
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
@ArduinoBot
Hello! I'm checking your submission again.
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
@ArduinoBot
Hello! I'm checking your submission again.
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/EMULATOR_Adafruit_SSD1306:
Linting library in EMULATOR_Adafruit_SSD1306
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in EMULATOR_Adafruit_SSD1306/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in EMULATOR_Adafruit_SSD1306/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in EMULATOR_Adafruit_SSD1306/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in EMULATOR_Adafruit_SSD1306/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in EMULATOR_Adafruit_SSD1306/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
@ArduinoBot
Hello! I'm checking your submission again.
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
@ArduinoBot
Hello! I'm checking your submission again.
:x: ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:
Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use
spaces.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP015)
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a
unique name value. If your library is already in the index, use the "--library-manager update" flag.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP017)
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy
is not needed.
See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
(Rule LP036)
Linter results for project: 1 ERRORS, 2 WARNINGS
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c
Linter results for project: no errors or warnings
-------------------
Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi
Linter results for project: no errors or warnings
-------------------
Linter results for projects: 1 ERRORS, 2 WARNINGS
Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach Please resolve the error(s) mentioned in the previous comment.
After resolving the issue, trigger this check again by doing one of the following:
@ArduinoBot
in the comment.:exclamation: NOTE: It is not necessary to open a new pull request. :exclamation:
More information: https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request
This library is a key part of an open-source OLED emulator that I'm preparing to publish.
This library takes care of sending the serial data the emulator needs from the Arduino back to the serial bus :)