search

arduino / uno-r4-wifi-usb-bridge

27 stars 9 forks source link

Sketch upload is not possible if ESP module is trying to connect to wifi #34

Closed pennam closed 9 months ago

pennam commented 9 months ago

SAM-BA fails with the following log

/home/pennam/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino5/bossac -d --port=ttyACM0 -U -e -w /tmp/arduino_build_509938/ArduinoIoTCloud-Basic.ino.bin -R 
Set binary mode
version()=Arduino Bootloader (SAM-BA extended) 2.0 [Arduino:IKXYZ]
Connected at 921600 baud
identifyChip()=nRF52840-QIAA
write(addr=0,size=0x34)
writeWord(addr=0x30,value=0x400)
writeWord(addr=0x20,value=0)
Erase flash
chipErase(addr=0)

Done in 0.001 seconds
Write 104184 bytes to flash (26 pages)
[                              ] 0% (0/26 pages)write(addr=0x34,size=0x1000)
writeBuffer(scr_addr=0x34, dst_addr=0, size=0x1000)
[=                             ] 3% (1/26 pages)write(addr=0x34,size=0x1000)
writeBuffer(scr_addr=0x34, dst_addr=0x1000, size=0x1000)
[==                            ] 7% (2/26 pages)write(addr=0x34,size=0x1000)
writeBuffer(scr_addr=0x34, dst_addr=0x2000, size=0x1000)
[===                           ] 11% (3/26 pages)write(addr=0x34,size=0x1000)
writeBuffer(scr_addr=0x34, dst_addr=0x3000, size=0x1000)
[====                          ] 15% (4/26 pages)
write(addr=0x34,size=0x1000)
writeBuffer(scr_addr=0x34, dst_addr=0x4000, size=0x1000)
SAM-BA operation failed
Errore durante il caricamento dello sketch