search

area515 / Photonic3D

Control software for resin 3D printers
http://photonic3d.com
GNU General Public License v3.0
131 stars 115 forks source link

Paused with error : Can't seem to find why the error was #291

Closed kloknibor closed 7 years ago

kloknibor commented 7 years ago

Hi,

Last night I had an error on one of the printers. Software was still up and running but the printjob gave an error like something like : Paused with warning.

I couldn't find in cwh.log why it decided to pause the print... Any idea why the print failed?

LogBundle (4).zip

WesGilster commented 7 years ago

You really need to use the latest version of Photonic 3D as these logs are getting completely obscured by the USB debugging we put in a while back. In fact, the logs rolled by the time you did the diagnostic dump and it didn't expose the cause of the error.

There are three ways that Photonic3D can be paused due to an error:

  1. Printer sent back an error code.
  2. InkDetector threw an exception. I'm guessing you aren't even using this.
  3. Errors in Geometry while slicing. If you weren't printing an STL, this didn't happen.

If it's not 2 and 3, then this says your printer sent back an error code and there wasn't a description attached to it.

WesGilster commented 7 years ago

Actually I did another quick check. It looks like you were trying to print gyrothecube.STL That puts case 3 back into play.

WesGilster commented 7 years ago

My latest update adds error descriptions for cases 2 and 3 now when PausedWithWarning is set. Case 1 was already being set.

kloknibor commented 7 years ago

Hi wes,

I agreed with WG that we first needed to fix our issues before merging. But those have been resolved friday so I will do a merge on monday ;)

Indeed I was printing that .stl (gyrocube.stl) I don't have acces to the file atm but I will check on monday. Shall I send you the file as well?

Thanks!

kloknibor commented 7 years ago

And indeed I don't use the ink detector

WesGilster commented 7 years ago

WG is right, mixing too much code from different places can be a nightmare if you haven't solved your own issues first.

Thanks,

Wes G.

On 11/19/2016 5:02 AM, Robin wrote:

Hi wes,

I agreed with WG that we first needed to fix our issues before merging. But those have been resolved friday so I will do a merge on monday ;)

Indeed I was printing that .stl (gyrocube.stl) I don't have acces to the file atm but I will check on monday. Shall I send you the file as well?

Thanks!

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/area515/Photonic3D/issues/291#issuecomment-261707492, or mute the thread https://github.com/notifications/unsubscribe-auth/ACT_NDfxqukzki-dhXezB2RPmQoae8wpks5q_tc_gaJpZM4K2ZfU.