Fan Control when using Armory Crate from within your software - buggy

aredden / electron-G14Control

Electron desktop application replacement for G14ControlR3.

MIT License

209 stars 27 forks source link

Fan Control when using Armory Crate from within your software - buggy #43

Open Filechaser opened 3 years ago

Filechaser commented 3 years ago

When using the Armory Crate option from within your app and a Fan Profile too, then the Fan Profile doesn't always get applied correctly.

Can you make sure, the software first switches the armory crate profil and then the rest. Then Probably check 30 seconds later if the fan profile really corresponds to the active profile. If not apply again? Or as workaround make the plans visible in the context menu to fast apply them

aredden commented 3 years ago

In order for an armoury crate profile to get applied with a fan curve, it must be at the same time. Also, fan curves are weird in general and frequently cause fan oscillation. This isn't because of my app.. it's because of the g14 hardware.

ProNoob404 commented 3 years ago

@aredden is it possile to set fan curve with minimal rpm but not fanless? I used to try with silence/performance and slow fan. Everytime when I set something above 0% rpm curve was ok but rpm still 0% (0-60 C degrees) doesnt matter if I set 20 or 50%