search

aredn / aredn

Amateur Radio Emergency Data Network (AREDN)
https://www.arednmesh.org
Other
183 stars 72 forks source link

Ubiquity Litebeam 5AC gen 2 - No IP (192.168.1.1) after install #1672

Open vijaybala1 opened 1 month ago

vijaybala1 commented 1 month ago

Describe the bug

I installed 3.24.10.0 , 3.24.6.0 and 20241102 Nightly for Model " Ubiquiti LiteBeam AC Gen2" on a Ubiquity Litebeam 5AC Gen2. The instruction all worked with expected output. After the installation I cannot ping and 192.168.1.1 or get the AREDN Setup page to come up. The MeshNode2G WiFI is visible and if I connected to it I can see that firmware seems to have install correctly and the page @192.168.1.1 comes up. After Setting up the node and rebooting its is still is not accessible over the write

Setup for install is Laptop with Win11, Dumb TP link switch and Litebeam powered via POE adaptor.

Expected behavior

After installation, I expect to point the browser at 192.168.1.1 and expect the setup page to come up.

Screenshots

Please include a screenshot of your system information (if possible) if the specific system environment is relevant to the bug.

If applicable, add screenshots to help explain your problem.

Additional context

Add any other context about the problem here. 20241103_203822

wu2s commented 4 weeks ago

The current firmware works with this device. Try again with the TFTP install and make sure you check you laptop IP address at each step. WU2S-LB-B LiteBeam 5 AC Gen 2

vijaybala1 commented 4 weeks ago

Ok tried with the latest nightly build from the screenshot above. No luck. Seem like I am doing something incorrectly assuming device is okay.

Setup for install is Windows 11 PC and Device connected to a TP LInk switch with nothing else on the switch,

Here are some screenshot and my setups The install progress smoothly .

  1. Reset device to look TFTP
  2. ping 192.168.1.20 .. good
  3. transfer 8.7.4 UI firmware .. good
  4. bring up UI console. Set the admin password
  5. see screenshot - follow instructions to setup
  6. wait 10 mins
  7. ping 192.168.1.1 .. no response
  8. ping 192.168.1.20 no response
  9. Restart device
  10. ping 192.168.1.1 .. no response
  11. ping 192.168.1.20 no response
  12. check WiFI - I can see MeshNode2G
  13. connect to MeshNode2G
  14. AREDN page comes up just fine.

Let me know if anything can be corrected

Thanks

aredn-setup2 aredn-setup aredn-ip
aanon4 commented 2 weeks ago

The thought here is that there has been a minor hardware revision which stops the ethernet working. I have this device, but bought it > 12 months ago, and it works fine. If someone wants to send known broken hardware, that's probably what it will take.