Restart every 20-25 minutes

mefisto22 commented 3 years ago

PROBLEM DESCRIPTION

I have 20+ esp8266/esp32 devices with tasmota 9.2.0. My tasmota devices started to restart every 20-25 minutes.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

[ ] Read the Contributing Guide and Policy and the Code of Conduct
[ ] Searched the problem in issues
[ ] Searched the problem in discussions
[ ] Searched the problem in the docs
[ ] Searched the problem in the chat
[x] Device used (e.g., Sonoff Basic): Sonoff T1 1ch and Sonoff T1 2ch
[x] Tasmota binary firmware version number used: 9.2.0
- [x] Pre-compiled
- [ ] Self-compiled
[x] Flashing tools used: NodeMCU-PyFlasher-4.0-x64.

[x] Provide the output of command: Backlog Template; Module; GPIO 255:


Configuration output here:
stat/nappali/RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
stat/nappali/RESULT = {"Module":{"29":"Sonoff T1 2CH"}}
stat/nappali/RESULT = {"GPIO0":{"32":"Button1"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"0":"None"},"GPIO5":{"225":"Relay2"},"GPIO9":{"33":"Button2"},"GPIO10":{"0":"None"},"GPIO12":{"224":"Relay1"},"GPIO13":{"320":"Led_i1"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}}}

- [ ] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:
```lua
  Rules output here:

[x] Provide the output of this command: Status 0:


STATUS 0 output here:
01:00:46 CMD: status 0
01:00:46 MQT: stat/nappali/STATUS = {"Status":{"Module":29,"DeviceName":"nappali","FriendlyName":["nappali","Tasmota2"],"Topic":"nappali","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":6,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
01:00:46 MQT: stat/nappali/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin.gz","RestartReason":"Exception","Uptime":"0T00:04:12","StartupUTC":"2021-02-09T23:56:34","Sleep":50,"CfgHolder":4617,"BootCount":16,"BCResetTime":"2021-02-09T21:02:16","SaveCount":38,"SaveAddress":"F6000"}}
01:00:46 MQT: stat/nappali/STATUS2 = {"StatusFWR":{"Version":"9.2.0(tasmota)","BuildDateTime":"2020-12-21T15:03:40","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"409/699"}}
01:00:46 MQT: stat/nappali/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["TorokHome_IoT",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["000AA009","2805C8000100060000005A00000000000000","00000200","00006000","00000000"]}}
01:00:46 MQT: stat/nappali/STATUS4 = {"StatusMEM":{"ProgramSize":586,"Free":416,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000809","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
01:00:46 MQT: stat/nappali/STATUS5 = {"StatusNET":{"Hostname":"nappali","IPAddress":"192.168.22.221","Gateway":"192.168.22.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.22.202","Mac":"D8:F1:5B:C8:F7:CB","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
01:00:46 MQT: stat/nappali/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.22.202","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_C8F7CB","MqttUser":"DVES_USER","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
01:00:46 MQT: stat/nappali/STATUS7 = {"StatusTIM":{"UTC":"2021-02-10T00:00:46","Local":"2021-02-10T01:00:46","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"08:06","Sunset":"18:02"}}
01:00:46 MQT: stat/nappali/STATUS10 = {"StatusSNS":{"Time":"2021-02-10T01:00:46"}}
01:00:46 MQT: stat/nappali/STATUS11 = {"StatusSTS":{"Time":"2021-02-10T01:00:46","Uptime":"0T00:04:12","UptimeSec":252,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER1":"ON","POWER2":"OFF","Wifi":{"AP":1,"SSId":"TorokHome_IoT","BSSId":"E2:63:DA:71:95:C3","Channel":6,"RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:03"}}}
01:00:46 MQT: stat/nappali/STATUS12 = {"StatusSTK":{"Exception":29,"Reason":"Exception","EPC":["4000df64","00000000","00000000"],"EXCVADDR":"00000000","DEPC":"00000000","CallChain":["40104a57","40101494","40260d7f","401037b3","40260d14","40260cbb","4025fe18","4025fe41","4025d8ac","40259c15","4025e5a3","4025e016","40267767","40267027","40245018","40000f49","40000f49","40000e19","40105a61","40105a67","4010000d","40265f10","40265ec1","4010595b","40100a40","4010595b","40106201","4010323f","40103420","40100a40","40106201"]}}``

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem. https://imgur.com/a/OPu3iPO

ADDITIONAL CONTEXT

Add any other context about the problem here. I use two unifi ap-ac-lr, with mikrotik crs328. Everything worker for half year, and without any change tasmota's started to restart every 20-25 minutes. Mikrotik version: 6.47.1 Unifi controller version: 6.0.45 (Build: atag_6.0.45_14358) Unifi ap version: 4.3.26.11358 I flashed sonoffs with usb to ttl, not OTA.

(Please, remember to close the issue when the problem has been addressed)

ascillato2 commented 3 years ago

Hi,

This is a duplicated issue. You must allow NTP to sync.

Please, address this to the Tasmota Support Chat. The chat is a better and more dynamic channel for helping you. Github issues are meant for Tasmota Software Bug Reporting.

Remember to read the Contributing Guideline and Policy. Thanks.

Support Information

See Docs for more information. See Chat for more user experience. See Code of Conduct

mefisto22 commented 3 years ago

I set time 0,and local ntp server. But problem is not solved.

arendst / Tasmota