Support of SCD41 I2C CO2 Sensor

i would like to use an Sensirion SCD30 Sensor. can anybody add this Sensor?

Link to description:

https://www.sensirion.com/de/umweltsensoren/kohlendioxidsensor/kohlendioxidsensor-scd4x/

Sensor and Interface description here:

https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9.5_CO2/Sensirion_CO2_Sensors_SCD4x_Datasheet.pdf

Benefits of the SCD41:

-Only 3V3 Supply to connect directly to microcontroller -Temperature and humidity Sensor build in -i2c -Self Calibrating -not to expensive -long lasting due to new photoakustic Sensor principle -high accuracy: ±(40 ppm + 5 % of measured value) -wide range: 400 ppm to 5'000 ppm

Best Regards!

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

[ ] Read the Contributing Guide and Policy and the Code of Conduct
[ ] Searched the problem in issues
[ ] Searched the problem in discussions
[ ] Searched the problem in the docs
[ ] Searched the problem in the chat
[ ] Device used (e.g., Sonoff Basic): _____
[ ] Tasmota binary firmware version number used: _____
- [ ] Pre-compiled
- [ ] Self-compiled
[ ] Flashing tools used: _____
[ ] Provide the output of command: Backlog Template; Module; GPIO 255:
```
Configuration output here:
```

- [ ] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:
```lua
  Rules output here:

[ ] Provide the output of this command: Status 0:
```
STATUS 0 output here:
```

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

This issue has been automatically closed because the PROBLEM REPORT TEMPLATE is missing or incomplete. Filling the template is required so standard questions don't need to be asked again each time. Our ability to provide assistance is greatly hampered if few minutes are not taken to complete the issue template with the requested information. The details requested potentially affect which options to pursue. The small amount of time you will spend completing the template will also help the volunteers, providing assistance to you, to reduce the time required to help you. Please, could you be so kind on completing the PROBLEM REPORT TEMPLATE in order to have more information so as to properly help you? Thank you for taking the time to report, hopefully it can be resolved soon. Docs for more information. Discussions for Questions, Feature Requests and Projects. Chat for more users experience.
Please check the Code of Conduct and the Contributing Guideline and Policy

arendst / Tasmota