Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
On the Domoticz parameters page in Tasmota 12.0.2:
I seem to be missing the Sensor idx # field where I can put the humidity -Sonoff MS01- sensor idx for Domoticz.
So I have the sensor connected and on the Main menu it shows but I cannot seem to relay the sensor data through MQTT to my NAS domotics version.
I have multiple sensors (temp, hum etc.) that work perfectly but the possibility for the MS01 seems to me missing.
Can anyone help in this case?
Thanks,
Zaph
PROBLEM DESCRIPTION
A clear and concise description of what the problem is.
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
Hi,
On the Domoticz parameters page in Tasmota 12.0.2: I seem to be missing the Sensor idx # field where I can put the humidity -Sonoff MS01- sensor idx for Domoticz. So I have the sensor connected and on the Main menu it shows but I cannot seem to relay the sensor data through MQTT to my NAS domotics version. I have multiple sensors (temp, hum etc.) that work perfectly but the possibility for the MS01 seems to me missing.
Can anyone help in this case?
Thanks, Zaph
PROBLEM DESCRIPTION
A clear and concise description of what the problem is.
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
Backlog Template; Module; GPIO 255
:Status 0
:TO REPRODUCE
Steps to reproduce the behavior:
EXPECTED BEHAVIOUR
A clear and concise description of what you expected to happen.
SCREENSHOTS
If applicable, add screenshots to help explain your problem.
ADDITIONAL CONTEXT
Add any other context about the problem here.
(Please, remember to close the issue when the problem has been addressed)