ME81H Thermostat + Tasmota

[RobertBerger]

I probably should not report it here, but i theory the ME81H Termostat should be supported by Tasmota[1]

[1] https://templates.blakadder.com/ME81H.html

The chip soldered in my device is a Model: WBR3

Is this supposed to be flashed in circuit, or do I need to unsolder/replace it with another chip?

I will contact:

• If your issue is a flashing issue, please address it to the Tasmota Support Chat as well.

[close-issue-app[bot]]

This issue has been automatically closed because the PROBLEM REPORT TEMPLATE is missing or incomplete. Filling the template is required so standard questions don't need to be asked again each time. Our ability to provide assistance is greatly hampered if few minutes are not taken to complete the issue template with the requested information. The details requested potentially affect which options to pursue. The small amount of time you will spend completing the template will also help the volunteers, providing assistance to you, to reduce the time required to help you. Please, could you be so kind on completing the PROBLEM REPORT TEMPLATE in order to have more information so as to properly help you? Thank you for taking the time to report, hopefully it can be resolved soon. Docs for more information. Discussions for Questions, Feature Requests and Projects. Chat for more users experience.
Please check the Code of Conduct and the Contributing Guideline and Policy

[barbudor]

I probably should not report it here

Issues are only to report qualified bugs You should have open a Discussion

Nevertheless WBR3 does not include a ESP processor and won't support tasmota You need to replace the module. Apparently ESP12-E/ESP12-F should be fine: https://developer.tuya.com/en/docs/iot/wbr3-module-datasheet?id=K9dujs2k5nriy https://tasmota.github.io/docs/Pinouts/#esp-12eesp-12f

A good opportunity to replace by an ESP32c3 based module such as the ESP12-C3-F : https://templates.blakadder.com/ESP-C3-12F.html

[sfromis]

In this case, you could report the device change using the edit link on each template page.

[g6094199]

for reference

[g6094199]

I probably should not report it here, but i theory the ME81H Termostat should be supported by Tasmota[1]

[1] https://templates.blakadder.com/ME81H.html

The chip soldered in my device is a Model: WBR3

Is this supposed to be flashed in circuit, or do I need to unsolder/replace it with another chip?

I will contact:

* If your issue is a flashing issue, please address it to the [Tasmota Support Chat](https://discord.gg/Ks2Kzd4) as well.

the WBR3 chip needs to be replaced to a ESP based one to be able to run tasmota. or you flash OpenBK7231T_App to the wbr3 modul which is a tasmota like firmware replacement for non esp based boards