Hue Emulation

[dmugnier]

PROBLEM DESCRIPTION

Hue Emulation Issue since 12.3.1 firmware (Ok with 8.4.1,,8.5.1, 9..4, and 12.2.0). I use a Lametric smart clock with HUE control.

I've decided to upgrade all my tasmota's smart switch, but the application on the smart clock hangs with the 12.3.1 fw.

I've downgraded to the 12.2.0 and i've no issue.

The switch become unresponsive and restart on each command from the Smart Clock

I would test 12.2.0.x FW but i can't find them.

Thank you,

Daniel

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• [ ] Read the Contributing Guide and Policy and the Code of Conduct
• [ ] Searched the problem in issues
• [ ] Searched the problem in discussions
• [ ] Searched the problem in the docs
• [ ] Searched the problem in the chat
• [ ] Device used (e.g., Sonoff Basic): _____
• [ ] Tasmota binary firmware version number used: _____
  • [ ] Pre-compiled
  • [ ] Self-compiled
• [ ] Flashing tools used: _____
• [ ] Provide the output of command: Backlog Template; Module; GPIO 255:

  
  Configuration output here:

- [ ] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:
```lua
  Rules output here:

• [ ] Provide the output of this command: Status 0:

  
  STATUS 0 output here:

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[s-hadinger]

Unfortunately you gave no detail about your configuration and no log. Unless you provide the required information, I'm afraid nobody can help you.

[Jason2866]

Closing since required informations are not provided. Reopen with the needed infos when the issue is still there.