Full saturation in RGB mode triggers restart

PROBLEM DESCRIPTION

If I configure a RGB led controller and set saturation to 100 percent in web gui then tasmota reboots. when I set the color after reboot it reboots again.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

[x] Read the Contributing Guide and Policy and the Code of Conduct
[x] Searched the problem in issues
[x] Searched the problem in discussions
[x] Searched the problem in the docs
[x] Searched the problem in the chat
[x] Device used (e.g., Sonoff Basic): esp8266 12e + Leds and same behaviour on h801
[x] Tasmota binary firmware version number used: Tasmota Version 13.2.0(sensors)-2_7_4_9(2023-10-19T09:02:00)
- [x] Pre-compiled
- [ ] Self-compiled
[x] Flashing tools used: nodemcu flasher

[ ] Provide the output of command: Backlog Template; Module; GPIO 255:


Configuration output here:
{"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
{"Module":{"0":"Generic"}}
{"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"418":"PWM3"},"GPIO3":{"0":"None"},"GPIO4":{"225":"Relay2"},"GPIO5":{"224":"Relay1"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"417":"PWM2"},"GPIO13":{"419":"PWM4"},"GPIO14":{"226":"Relay3"},"GPIO15":{"416":"PWM1"},"GPIO16":{"227":"Relay4"},"GPIO17":{"0":"None"}}

- [ ] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:
```lua
  Rules output here:
{"Rule1":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
{"Rule2":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
{"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}

[ ] Provide the output of this command: Status 0:


STATUS 0 output here:
13:43:07.017 RSL: STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota","Tasmota2","Tasmota3","Tasmota4",""],"Topic":"tasmota_1A8A13","ButtonTopic":"0","Power":31,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
13:43:07.053 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz","RestartReason":"Hardware Watchdog","Uptime":"0T00:09:50","StartupUTC":"2023-11-04T12:33:17","Sleep":50,"CfgHolder":4617,"BootCount":16,"BCResetTime":"2023-11-04T11:45:38","SaveCount":156,"SaveAddress":"F8000"}}
13:43:07.088 RSL: STATUS2 = {"StatusFWR":{"Version":"13.2.0(sensors)","BuildDateTime":"2023-10-19T09:02:00","Boot":5,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"379/699"}}
13:43:07.105 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Servus nachad!",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
13:43:07.146 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":701,"Free":300,"Heap":20,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"1640E0","FlashFrequency":40,"FlashMode":"DOUT","Features":["00000809","8F9A8787","0415A005","B7F7BFCF","05DA9BC4","64367CC7","00084052","20000000","54000020","0008C081"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,14,16,17,20,21,24,29,34,62,65,66,68","Sensors":"1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,62,64,66,67,74,98,103,105","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,69,76"}}
13:43:07.194 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota-1A8A13-2579","IPAddress":"192.168.178.69","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.178.1","DNSServer2":"0.0.0.0","Mac":"60:01:94:1A:8A:13","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
13:43:07.217 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_1A8A13","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
13:43:07.239 RSL: STATUS7 = {"StatusTIM":{"UTC":"2023-11-04T12:43:07","Local":"2023-11-04T13:43:07","StartDST":"2023-03-26T02:00:00","EndDST":"2023-10-29T03:00:00","Timezone":"+01:00","Sunrise":"07:41","Sunset":"17:25"}}
13:43:07.259 RSL: STATUS10 = {"StatusSNS":{"Time":"2023-11-04T13:43:07"}}
13:43:07.268 RSL: STATUS11 = {"StatusSTS":{"Time":"2023-11-04T13:43:07","Uptime":"0T00:09:50","UptimeSec":590,"Heap":20,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":101,"MqttCount":0,"POWER1":"ON","POWER2":"ON","POWER3":"ON","POWER4":"ON","POWER5":"ON","Dimmer":100,"Color":"FF032200","HSBColor":"353,99,100","White":0,"Channel":[100,1,13,0],"Scheme":0,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Servus nachad!","BSSId":"3C:37:12:84:15:FB","Channel":1,"Mode":"11n","RSSI":28,"Signal":-86,"LinkCount":1,"Downtime":"0T00:00:03"}}}

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:
...
13:48:38.920 SRC: WebGui from 192.168.178.74
13:48:38.928 RSL: RESULT = {"POWER5":"ON"}
13:48:38.931 RSL: POWER5 = ON
13:48:39.585 CFG: Saved to flash at F6, Count 190, Bytes 4096

and then the reboot happens

TO REPRODUCE

_Steps to reproduce the behavior: Just play aroud with the sliders and you will see a reboot if the saturation is on 100 percent. I think it happens more often if there is a change from white leds to rgb leds.

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

arendst / Tasmota