Allow select GPIO_IRRECV or Any other sensor on Arilux LC11

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

https://tasmota.github.io/docs

GNU General Public License v3.0

22.03k stars 4.78k forks source link

Allow select GPIO_IRRECV or Any other sensor on Arilux LC11 #2013

Closed timota closed 6 years ago

timota commented 6 years ago

Hi their,

is it possible to select sensor or GPIO_IRRECV for GPIO4 on Arilux LC11 ?

As an example on boards without IR receiver i can use GPIO4 to connect sensors, on borads with - remove IR and use it for any other sensor.

timota commented 6 years ago

Sorry module is Arilux LC01 Module

stale[bot] commented 6 years ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

stale[bot] commented 6 years ago

This issue will be auto-closed because there hasn't been any activity for a few months. Feel free to open a new one if you still experience this problem.