search

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
https://tasmota.github.io/docs
GNU General Public License v3.0
21.96k stars 4.77k forks source link

SONOFF D1 - POWERONSTATE not restored #20777

Closed Ciberyan closed 4 months ago

Ciberyan commented 6 months ago

Discussed in https://github.com/arendst/Tasmota/discussions/20722

Originally posted by **Ciberyan** February 14, 2024 Hello All I migrate my **Sonoff D1 dimmer** to **Tasmota 13.3.0**, as many of my Sonoff switches Everythings is working as expected, Power On, Off, Dimming but NOT the POWERONSTATE Whatever I set, the connected light doesnt comes up as I would like, and as I have set it through **"POWERONSTATE 1"** In the WEBUI and in the console at power on I get : The state of the output is right,ie **ON**, but no light The dimmer stay at the level it was before, but no light To get the light comes on I need either Change the DIMMER value slightly (issuing the same value doesnt change) Or send a Power Off then Power ON As I plan to put it in my ceiling, I need the light come up on his own when powered Does anybody involved in the D1 already see that behaviour ? Thanks in advance for any idea PS : the Lights On at PowerOn works ok in the Ewelink application when downgraded to standard Sonoff firmware PS2 : Upgrade to 13.4.0 doenst change anything obviuosly D1 doenst have rules so I cant write something to avoid this behaviour We are vey close of a funcionning system but No Power On at startup is a no go Hopefully someone will/can handle that Cant we imagine to have a kind of sequence executed automatically at powerup doing POWER 0 then right after a Power 1
MacGH23 commented 6 months ago

Have a similar issue with a Nous A1T and Refoss P11 wall plug. With 13.4 the last state is not saved. I can setup fixed ON and OFF (PowerOnState 0/1) but 3 Restore last is not working

stefanbode commented 5 months ago

there is a setoption63 I think that in the boot process check the current state and set it. Maybe switching it ON may solve this. set it to 1.

MacGH23 commented 5 months ago

unfortunately not.

stefanbode commented 5 months ago

Can you upload the log file with loglevel4. Please one time when the relay was off before boot and one when the relay was on before boot. It is not a general problem and we will find out.

Jason2866 commented 4 months ago

Closing since no feedback

Ciberyan commented 4 months ago

Sorry I am out my home for business and cant make the test I am sure the problem is still alive but I cant help more for the moment Sorry for that

Le dim. 28 avr. 2024 à 21:06, Jason2866 @.***> a écrit :

Closing since no feedback

— Reply to this email directly, view it on GitHub https://github.com/arendst/Tasmota/issues/20777#issuecomment-2081604866, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARU4ZKZ23T7EBEYEG2ORTK3Y7VCDPAVCNFSM6AAAAABDUUSF46VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBRGYYDIOBWGY . You are receiving this because you authored the thread.Message ID: @.***>

Jason2866 commented 4 months ago

Please reopen when you have verified not working There was a bug which is fixed.

MacGH23 commented 4 months ago

Sorry, was on vacation and forgot to answer onoff.txt