Are 512K H801 modules still supported in some way ?

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

https://tasmota.github.io/docs

GNU General Public License v3.0

21.69k stars 4.72k forks source link

Are 512K H801 modules still supported in some way ? #21651

Closed FulvioSpelta closed 2 weeks ago

FulvioSpelta commented 2 weeks ago

Starting from issue #2982 I kindly ask if there is a way to tasmotize them. I've searched 14.x sources but i can't find any 512k linker directive.

No problem to compile myself a specific ultra minimal version.

Thank a lot.

barbudor commented 2 weeks ago

If you mean ESP8266 with 512k flash, then answer is not supported Minimum is 1MB

You may be able to transplant a better module or flash chip depending on the board layout

sfromis commented 2 weeks ago

Assuming board layout similar to current H801, the easiest upgrade would be to replace the flash chip, just above the ESP8266 in the board image.