SML interface with 3 phase meters

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

Reading a 3-phase meter will end up 3 Voltage and Current values. Passing them to MQTT should be done in an array to be recognised in HA Tasmota integration.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

[x] Read the Contributing Guide and Policy and the Code of Conduct
[x] Searched the problem in issues
[x] Searched the problem in discussions
[x] Searched the problem in the docs
[x] Searched the problem in the chat
[x] Device used (e.g., Sonoff Basic): Generic ESP8266 board
[x] Tasmota binary firmware version number used: 14.2.0
- [ ] Pre-compiled
- [x] Self-compiled
[x] Flashing tools used: OTA

[x] Provide the output of command: Backlog Template; Module; GPIO 255:


Configuration output here:
12:11:20.380 MQT: stat/villanyora/RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
12:11:20.589 MQT: stat/villanyora/RESULT = {"Module":{"18":"Generic"}}
12:11:20.794 MQT: stat/villanyora/RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"0":"None"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}}

- [] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:
```lua
  Rules output here:

[x] Provide the output of this command: Status 0:


STATUS 0 output here:
12:12:04.876 MQT: stat/villanyora/STATUS = {"Status":{"Module":18,"DeviceName":"Villanyóra","FriendlyName":["Tasmota"],"Topic":"villanyora","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
12:12:04.882 MQT: stat/villanyora/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"","RestartReason":"Software/System restart","Uptime":"0T03:08:47","StartupUTC":"2024-09-12T07:03:17","Sleep":50,"CfgHolder":4617,"BootCount":24,"BCResetTime":"2024-09-11T20:58:21","SaveCount":44,"SaveAddress":"FD000"}}
12:12:04.886 MQT: stat/villanyora/STATUS2 = {"StatusFWR":{"Version":"14.2.0(TasmoCompiler-esp82664M)","BuildDateTime":"2024-09-11T19:11:07","Boot":31,"Core":"2_7_7","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"307/699"}}
12:12:04.890 MQT: stat/villanyora/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["KrisiNET",""],"TelePeriod":60,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000088","00006000","00004000","00000000"]}}
12:12:04.902 MQT: stat/villanyora/STATUS4 = {"StatusMEM":{"ProgramSize":718,"Free":1328,"Heap":8,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","078045CA","042E0001","00000003","00000000","C000E889","00020084","00201000","54000000","00000080","00000000"],"Drivers":"1,2,!4,!6,!8,9,10,12,!18,!19,!22,!24,26,29,!30,!35,!37,38,!41,!45,50,62,!68","Sensors":"1,2,53"}}
12:12:04.907 MQT: stat/villanyora/STATUS5 = {"StatusNET":{"Hostname":"Villanyora","IPAddress":"192.168.226.177","Gateway":"192.168.226.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.226.1","DNSServer2":"0.0.0.0","Mac":"80:64:6F:AC:20:D7","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
12:12:04.911 MQT: stat/villanyora/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.226.10","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_AC20D7","MqttUser":"DVES_USER","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
12:12:04.916 MQT: stat/villanyora/STATUS7 = {"StatusTIM":{"UTC":"2024-09-12T10:12:04Z","Local":"2024-09-12T12:12:04","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":99,"Sunrise":"07:23","Sunset":"20:08"}}
12:12:04.960 MQT: stat/villanyora/STATUS10 = {"StatusSNS":{"Time":"2024-09-12T12:12:04","SX631":{"Voltage":239.3,"Voltage":238.8,"Voltage":237.6,"Current":2.0,"Current":3.0,"Current":2.0,"Frequency":50.00,"tariff":1,"Power":0.000,"PowerExport":1.945,"Total":11.443,"ExportActive":36.652,"enrg_imp_t1":9.559,"enrg_imp_t2":1.884,"enrg_exp_t1":36.663,"enrg_exp_t2":0.000,"Factor":0.996,"nrg_reac_imp":0.180,"nrg_reac_exp":6.266,"nrg_reac_q1":0.019,"nrg_reac_q2":0.161,"nrg_reac_q3":2.147,"nrg_reac_q4":4.118,"pwr_reac_q1":0.000,"pwr_reac_q2":0.000,"pwr_reac_q3":0.170,"pwr_reac_q4":0.000}}}
12:12:04.967 MQT: stat/villanyora/STATUS11 = {"StatusSTS":{"Time":"2024-09-12T12:12:04","Uptime":"0T03:08:47","UptimeSec":11327,"Heap":8,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"KrisiNET","BSSId":"2C:C8:1B:84:41:36","Channel":9,"Mode":"11n","RSSI":22,"Signal":-89,"LinkCount":1,"Downtime":"0T00:00:04"}}}

- [ ] Set `weblog` to 4 and then, when you experience your issue, provide the output of the Console log:
```lua
  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

All the MQTT messages has the same structure.

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

The MQTT message with the 3-phase values should be in an array.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

arendst / Tasmota