arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

https://tasmota.github.io/docs

GNU General Public License v3.0

21.75k stars 4.72k forks source link

question: Found These PIR #2641

Closed MYLE-01 closed 6 years ago

MYLE-01 commented 6 years ago

https://www.ebay.com/itm/5pcs-Mini-IR-Infrared-Pyroelectric-PIR-Body-Motion-Human-Sensor-Detector-Module/222218187242?epid=595198651&hash=item33bd3c71ea:g:5DkAAOSw6n5XrvZx

looks like they only need 3.3v

could we put on to gpio14

Jason2866 commented 6 years ago

Should work, in my opinion to expensive Take a look here to use a cheap HC-SR501 http://techgurka.blogspot.de/2013/05/cheap-pyroelectric-infrared-pir-motion.html

1567

MichiM2 commented 6 years ago

The Mini-PIR works well with the 3v3 from the Sonoff Basic. If you remove the 3 Pins from the PIR, and drill a hole into the Sonoff Basic, you could install it easyly inside the Basic and wire it to the GPIO14, 3v3 and GND-Pins. Be sure not come too near the 230V lines!

MYLE-01 commented 6 years ago

thanks Just order some