search

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
https://tasmota.github.io/docs
GNU General Public License v3.0
22.2k stars 4.81k forks source link

Sonoff Touch T1 not saving configuration #2805

Closed sleezy100 closed 6 years ago

sleezy100 commented 6 years ago

Hi all, I've flashed my first Sonoff Touch T1 with Tasmota. The problem im having is: i connect to it and change the wifi settings, hit save, it then says it has saved new settings and will restart. When it restarts it goes back to wifi manager and never connects to my network. I've flashed tasmota 5.12.0 with 2.4.0 and again with 2.4.1. It finds my wifi and says it has signal strength of 78%.

ascillato commented 6 years ago

Hi, may be there is a problem with your password. If it is too long or have special characters like * will not work, and will not connect to your wifi router.

sleezy100 commented 6 years ago

I've just taken it to my router and it connects. As soon as i take it back to the room i want to install it, it will not connect again. Its wifi manager says that the signal for my network is over 80 %.

ascillato commented 6 years ago

Your configuration on your router is the default one, or you have changed the channels config? Also remember that a 5G router will not work with ESP8266 chips

Frogmore42 commented 6 years ago

Use 2.3.0, some environments and devices don't work with 2.4.x

jossie67 commented 6 years ago

I have the same issue connecting to Wifi with a Sonoff Touch , I din't change the password of my wifi. Going back to Sonoff-Tasmota 5.13.1a

sleezy100 commented 6 years ago

Got it sorted now. Had to put a wifi extender in the same room as the switch.