Closed jwoodard80 closed 5 years ago
Dont understand what could make a issue. You get in worst case some mqtt messages with the info from you RF433 device. I use this setup too. No problem, just check in my Home Automation system the messages i get and consolidate the infos....
Closing this issue as it has been answered.
See Wiki for more information. See Chat for more user experience. See Community for forum. See Code of Conduct
Have you look for this feature in other issues and in the wiki? Yes, I didn't see something exactly related
Is your feature request related to a problem? Please describe. I have 433mhz sensors spread out all over my home and I have 3 sonoff RF bridges spaced out to try to improve the overall reach and stability. Works good, howeve, if one of the bridges happens to get a signal as well, the multiple mqtt publishes are made. This usually doesn't cause issues but sometimes it does.
Describe the solution you'd like it seems this is implemented in this project, however, I enjoy tasmota too much to change so I'm hoping it could be incorporated into a future release. https://github.com/1technophile/OpenMQTTGateway/wiki/Multiple-gateway-installation
If someone has an alternative I'm happy to try. I just thought the above sounded promising and I do not want to change my firmware. :-)