search

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
https://tasmota.github.io/docs
GNU General Public License v3.0
22.04k stars 4.78k forks source link

Help with H801 and RGBW via MQTT #576

Closed Blue407 closed 6 years ago

Blue407 commented 7 years ago

New to all this, so please be gentle :)

I have successfuly configured my H801 and reflashed it with Sonoff-Tasmota.

I have tested commands like:- mosquitto_pub -r -t cmnd/H801-1/PWM4 -m "1000"

Which work fine.

Is there a way to set multiple colour values at the same time in one line? Or do I have to issue 4 separate colour commands every time?

I plan on using this with Openhab, so any advice specific to that would be appreciated :) :) I hope to have a colour picker as well as some pre-defined colours like Green, Purple, White etc.

arendst commented 7 years ago

Currently there is only single pwm control.

Blue407 commented 7 years ago

Is there any chance of multiple PWM control at a later date?

Any advice on how best to use it to pick colours based on its current limitation?

cobra85ec commented 7 years ago

are u using node-red..?

Blue407 commented 7 years ago

No, OpenHAB.

kruebsam commented 7 years ago

Would also be interested in the above with exactly same config

stale[bot] commented 6 years ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

stale[bot] commented 6 years ago

This issue will be auto-closed because there hasn't been any activity for a few months. Feel free to open a new one if you still experience this problem.